memcached源代码阅读笔记（6）memcached1.4.10 在linux平台多线程模型研究
为了方便gdb调试，按照如下重新编译./configure --prefix=/usr/local/memcached --with-libevent=/usr/local/libevent CPPFLAGS='-ggdb3'
make && make install
gdb memcached
gdb>set args -p 11211 -m 64 -uroot -t2 -vv
然后
gdb>b main
然后s,n,u,disp,printf跟踪。
这里仅研究TCP的情况，udp和unix域基本差不多。
main()
thread_init(settings.num_threads, main_base);
这是初始化线程
if (start_assoc_maintenance_thread() == -1) {
exit(EXIT_FAILURE);
}这个是开始一个hash批量维护的线程，用于扩展hash表。
if (settings.port && server_sockets(settings.port, tcp_transport,
portnumber_file))
void thread_init(int nthreads, struct event_base *main_base) {
int i;
int power;
pthread_mutex_init(&cache_lock, NULL);
pthread_mutex_init(&stats_lock, NULL);
pthread_mutex_init(&init_lock, NULL);
pthread_cond_init(&init_cond, NULL);
pthread_mutex_init(&cqi_freelist_lock, NULL);
cqi_freelist = NULL;
/* Want a wide lock table, but don't waste memory */
if (nthreads < 3) {
power = 10;
} else if (nthreads < 4) {
power = 11;
} else if (nthreads < 5) {
power = 12;
} else {
/* 8192 buckets, and central locks don't scale much past 5 threads */
power = 13;
}
item_lock_count = ((unsigned long int)1 << (power));
item_lock_mask= item_lock_count - 1;
item_locks = calloc(item_lock_count, sizeof(pthread_mutex_t));
if (! item_locks) {
perror("Can't allocate item locks");
exit(1);
}
for (i = 0; i < item_lock_count; i++) {
pthread_mutex_init(&item_locks, NULL);
}
threads = calloc(nthreads, sizeof(LIBEVENT_THREAD));
if (! threads) {
perror("Can't allocate thread descriptors");
exit(1);
}
dispatcher_thread.base = main_base;
dispatcher_thread.thread_id = pthread_self();
for (i = 0; i < nthreads; i++) {
int fds;
if (pipe(fds)) {
perror("Can't create notify pipe");
exit(1);
}
threads.notify_receive_fd = fds;
threads.notify_send_fd = fds;
setup_thread(&threads);
/* Reserve three fds for the libevent base, and two for the pipe */
stats.reserved_fds += 5;
}
/* Create threads after we've done all the libevent setup. */
for (i = 0; i < nthreads; i++) {
create_worker(worker_libevent, &threads);
}
/* Wait for all the threads to set themselves up before returning. */
pthread_mutex_lock(&init_lock);
while (init_count < nthreads) {
pthread_cond_wait(&init_cond, &init_lock);
}
pthread_mutex_unlock(&init_lock);
}
dispatcher_thread.base = main_base;
dispatcher_thread.thread_id = pthread_self();
这说明dispatcher_thread是主线程
if (pipe(fds)) {
perror("Can't create notify pipe");
exit(1);
}
threads.notify_receive_fd = fds;
threads.notify_send_fd = fds;
为每个工作线程建立通知管道
setup_thread(&threads);
初始化工作线程
create_worker(worker_libevent, &threads);
创建工作线程
pthread_mutex_lock(&init_lock);
while (init_count < nthreads) {
pthread_cond_wait(&init_cond, &init_lock);
}
pthread_mutex_unlock(&init_lock);
等待所有工作线程创建完毕。
static void setup_thread(LIBEVENT_THREAD *me) {
me->base = event_init();
if (! me->base) {
fprintf(stderr, "Can't allocate event base\n");
exit(1);thread_libevent_process
}
/* Listen for notifications from other threads */
event_set(&me->notify_event, me->notify_receive_fd,
EV_READ | EV_PERSIST, thread_libevent_process, me);
为通知管道设置响应函数
event_base_set(me->base, &me->notify_event);
if (event_add(&me->notify_event, 0) == -1) {
fprintf(stderr, "Can't monitor libevent notify pipe\n");
exit(1);
}
me->new_conn_queue = malloc(sizeof(struct conn_queue));
if (me->new_conn_queue == NULL) {
perror("Failed to allocate memory for connection queue");
exit(EXIT_FAILURE);
}
cq_init(me->new_conn_queue);
初始化工作队列
if (pthread_mutex_init(&me->stats.mutex, NULL) != 0) {
perror("Failed to initialize mutex");
exit(EXIT_FAILURE);
}
me->suffix_cache = cache_create("suffix", SUFFIX_SIZE, sizeof(char*),
NULL, NULL);
if (me->suffix_cache == NULL) {
fprintf(stderr, "Failed to create suffix cache\n");
exit(EXIT_FAILURE);
}
工作线程收到通知后的响应函数
static void thread_libevent_process(int fd, short which, void *arg) {
LIBEVENT_THREAD *me = arg;
CQ_ITEM *item;
char buf;
if (read(fd, buf, 1) != 1)//查看是否收到正确的管道通知
if (settings.verbose > 0)
fprintf(stderr, "Can't read from libevent pipe\n");
item = cq_pop(me->new_conn_queue);//弹出连接队列
if (NULL != item) {
conn *c = conn_new(item->sfd, item->init_state, item->event_flags,
item->read_buffer_size, item->transport, me->base);创建一个新的连接，当然这个新的连接的状态不再是Listening
if (c == NULL) {
if (IS_UDP(item->transport)) {
fprintf(stderr, "Can't listen for events on UDP socket\n");
exit(1);
} else {
if (settings.verbose > 0) {
fprintf(stderr, "Can't listen for events on fd %d\n",
item->sfd);
}
close(item->sfd);
}
} else {
c->thread = me;
}
cqi_free(item);
}
}
static int server_socket(const char *interface,
int port,
enum network_transport transport,
FILE *portnumber_file) {
int sfd;
struct linger ling = {0, 0};
struct addrinfo *ai;
struct addrinfo *next;
struct addrinfo hints = { .ai_flags = AI_PASSIVE,
.ai_family = AF_UNSPEC };
char port_buf;
int error;
int success = 0;
int flags =1;
hints.ai_socktype = IS_UDP(transport) ? SOCK_DGRAM : SOCK_STREAM;
if (port == -1) {
port = 0;
}
snprintf(port_buf, sizeof(port_buf), "%d", port);
error= getaddrinfo(interface, port_buf, &hints, &ai);
if (error != 0) {
if (error != EAI_SYSTEM)
fprintf(stderr, "getaddrinfo(): %s\n", gai_strerror(error));
else
perror("getaddrinfo()");
return 1;
}
for (next= ai; next; next= next->ai_next) {
conn *listen_conn_add;
if ((sfd = new_socket(next)) == -1) {
/* getaddrinfo can return "junk" addresses,
* we make sure at least one works before erroring.
*/
if (errno == EMFILE) {
/* ...unless we're out of fds */
perror("server_socket");
exit(EX_OSERR);
}
continue;
}
#ifdef IPV6_V6ONLY
if (next->ai_family == AF_INET6) {
error = setsockopt(sfd, IPPROTO_IPV6, IPV6_V6ONLY, (char *) &flags, sizeof(flags));
if (error != 0) {
perror("setsockopt");
close(sfd);
continue;
}
}
#endif
setsockopt(sfd, SOL_SOCKET, SO_REUSEADDR, (void *)&flags, sizeof(flags));
if (IS_UDP(transport)) {
maximize_sndbuf(sfd);
} else {
error = setsockopt(sfd, SOL_SOCKET, SO_KEEPALIVE, (void *)&flags, sizeof(flags));
if (error != 0)
perror("setsockopt");
error = setsockopt(sfd, SOL_SOCKET, SO_LINGER, (void *)&ling, sizeof(ling));
if (error != 0)
perror("setsockopt");
error = setsockopt(sfd, IPPROTO_TCP, TCP_NODELAY, (void *)&flags, sizeof(flags));
if (error != 0)
perror("setsockopt");
}
if (bind(sfd, next->ai_addr, next->ai_addrlen) == -1) {
if (errno != EADDRINUSE) {
perror("bind()");
close(sfd);
freeaddrinfo(ai);
return 1;
}
close(sfd);
continue;
} else {
success++;
if (!IS_UDP(transport) && listen(sfd, settings.backlog) == -1) {
perror("listen()");
close(sfd);
freeaddrinfo(ai);
return 1;
}
if (portnumber_file != NULL &&
(next->ai_addr->sa_family == AF_INET ||
next->ai_addr->sa_family == AF_INET6)) {
union {
struct sockaddr_in in;
struct sockaddr_in6 in6;
} my_sockaddr;
socklen_t len = sizeof(my_sockaddr);
if (getsockname(sfd, (struct sockaddr*)&my_sockaddr, &len)==0) {
if (next->ai_addr->sa_family == AF_INET) {
fprintf(portnumber_file, "%s INET: %u\n",
IS_UDP(transport) ? "UDP" : "TCP",
ntohs(my_sockaddr.in.sin_port));
} else {
fprintf(portnumber_file, "%s INET6: %u\n",
IS_UDP(transport) ? "UDP" : "TCP",
ntohs(my_sockaddr.in6.sin6_port));
}
}
}
}
if (IS_UDP(transport)) {
int c;
for (c = 0; c < settings.num_threads_per_udp; c++) {
/* this is guaranteed to hit all threads because we round-robin */
dispatch_conn_new(sfd, conn_read, EV_READ | EV_PERSIST,
UDP_READ_BUFFER_SIZE, transport);
}
} else {
if (!(listen_conn_add = conn_new(sfd, conn_listening,
EV_READ | EV_PERSIST, 1,
transport, main_base)))
//这里是设置listenging状态 {
fprintf(stderr, "failed to create listening connection\n");
exit(EXIT_FAILURE);
}
listen_conn_add->next = listen_conn;
listen_conn = listen_conn_add;
}
}
freeaddrinfo(ai);
/* Return zero iff we detected no errors in starting up connections */
return success == 0;
}
conn *conn_new(const int sfd, enum conn_states init_state,
const int event_flags,
const int read_buffer_size, enum network_transport transport,
struct event_base *base) {
conn *c = conn_from_freelist();
if (NULL == c) {
if (!(c = (conn *)calloc(1, sizeof(conn)))) {
fprintf(stderr, "calloc()\n");
return NULL;
}
MEMCACHED_CONN_CREATE(c);
c->rbuf = c->wbuf = 0;
c->ilist = 0;
c->suffixlist = 0;
c->iov = 0;
c->msglist = 0;
c->hdrbuf = 0;
c->rsize = read_buffer_size;
c->wsize = DATA_BUFFER_SIZE;
c->isize = ITEM_LIST_INITIAL;
c->suffixsize = SUFFIX_LIST_INITIAL;
c->iovsize = IOV_LIST_INITIAL;
c->msgsize = MSG_LIST_INITIAL;
c->hdrsize = 0;
c->rbuf = (char *)malloc((size_t)c->rsize);
c->wbuf = (char *)malloc((size_t)c->wsize);
c->ilist = (item **)malloc(sizeof(item *) * c->isize);
c->suffixlist = (char **)malloc(sizeof(char *) * c->suffixsize);
c->iov = (struct iovec *)malloc(sizeof(struct iovec) * c->iovsize);
c->msglist = (struct msghdr *)malloc(sizeof(struct msghdr) * c->msgsize);
if (c->rbuf == 0 || c->wbuf == 0 || c->ilist == 0 || c->iov == 0 ||
c->msglist == 0 || c->suffixlist == 0) {
conn_free(c);
fprintf(stderr, "malloc()\n");
return NULL;
}
STATS_LOCK();
stats.conn_structs++;
STATS_UNLOCK();
}
c->transport = transport;
c->protocol = settings.binding_protocol;
/* unix socket mode doesn't need this, so zeroed out.but why
* is this done for every command?presumably for UDP
* mode.*/
if (!settings.socketpath) {
c->request_addr_size = sizeof(c->request_addr);
} else {
c->request_addr_size = 0;
}
if (settings.verbose > 1) {
if (init_state == conn_listening) {
fprintf(stderr, "<%d server listening (%s)\n", sfd,
prot_text(c->protocol));
} else if (IS_UDP(transport)) {
fprintf(stderr, "<%d server listening (udp)\n", sfd);
} else if (c->protocol == negotiating_prot) {
fprintf(stderr, "<%d new auto-negotiating client connection\n",
sfd);
} else if (c->protocol == ascii_prot) {
fprintf(stderr, "<%d new ascii client connection.\n", sfd);
} else if (c->protocol == binary_prot) {
fprintf(stderr, "<%d new binary client connection.\n", sfd);
} else {
fprintf(stderr, "<%d new unknown (%d) client connection\n",
sfd, c->protocol);
assert(false);
}
}
c->sfd = sfd;
c->state = init_state;
c->rlbytes = 0;
c->cmd = -1;
c->rbytes = c->wbytes = 0;
c->wcurr = c->wbuf;
c->rcurr = c->rbuf;
c->ritem = 0;
c->icurr = c->ilist;
c->suffixcurr = c->suffixlist;
c->ileft = 0;
c->suffixleft = 0;
c->iovused = 0;
c->msgcurr = 0;
c->msgused = 0;
c->write_and_go = init_state;
c->write_and_free = 0;
c->item = 0;
c->noreply = false;
event_set(&c->event, sfd, event_flags, event_handler, (void *)c);
event_base_set(base, &c->event);
这里设置处理函数是eventhandler
c->ev_flags = event_flags;
if (event_add(&c->event, 0) == -1) {
if (conn_add_to_freelist(c)) {
conn_free(c);
}
perror("event_add");
return NULL;
}
STATS_LOCK();
stats.curr_conns++;
stats.total_conns++;
STATS_UNLOCK();
MEMCACHED_CONN_ALLOCATE(c->sfd);
return c;
}
eventhandler函数很简单
void event_handler(const int fd, const short which, void *arg) {
conn *c;
c = (conn *)arg;
assert(c != NULL);
c->which = which;
/* sanity */
if (fd != c->sfd) {
if (settings.verbose > 0)
fprintf(stderr, "Catastrophic: event fd doesn't match conn fd!\n");
conn_close(c);
return;
}
drive_machine(c);
/* wait for next event */
return;
}
都调用了drive_machine(c);
static void drive_machine(conn *c) {
bool stop = false;
int sfd, flags = 1;
socklen_t addrlen;
struct sockaddr_storage addr;
int nreqs = settings.reqs_per_event;
int res;
const char *str;
assert(c != NULL);
static void drive_machine(conn *c) {
bool stop = false;
int sfd, flags = 1;
socklen_t addrlen;
struct sockaddr_storage addr;
int nreqs = settings.reqs_per_event;
int res;
const char *str;
assert(c != NULL);
while (!stop) {
switch(c->state) {
case conn_listening:
addrlen = sizeof(addr);
if ((sfd = accept(c->sfd, (struct sockaddr *)&addr, &addrlen)) == -1) {
if (errno == EAGAIN || errno == EWOULDBLOCK) {
/* these are transient, so don't log anything */
stop = true;
} else if (errno == EMFILE) {
if (settings.verbose > 0)
fprintf(stderr, "Too many open connections\n");
accept_new_conns(false);
stop = true;
} else {
perror("accept()");
stop = true;
}
break;
}
if ((flags = fcntl(sfd, F_GETFL, 0)) < 0 ||
fcntl(sfd, F_SETFL, flags | O_NONBLOCK) < 0) {
perror("setting O_NONBLOCK");
close(sfd);
break;
}
if (settings.maxconns_fast &&
stats.curr_conns + stats.reserved_fds >= settings.maxconns - 1) {
str = "ERROR Too many open connections\r\n";
res = write(sfd, str, strlen(str));
close(sfd);
STATS_LOCK();
stats.rejected_conns++;
STATS_UNLOCK();
} else {
dispatch_conn_new(sfd, conn_new_cmd, EV_READ | EV_PERSIST,
DATA_BUFFER_SIZE, tcp_transport);
这个函数开始向工作线程派发一个链接
void dispatch_conn_new(int sfd, enum conn_states init_state, int event_flags,
int read_buffer_size, enum network_transport transport) {
CQ_ITEM *item = cqi_new();
int tid = (last_thread + 1) % settings.num_threads;
//robin round模式轮询线程，这是最快的处理方式，也可以根据各个线程的queue number来分配，不过没太大必要，所以采用最简单的方式
LIBEVENT_THREAD *thread = threads + tid;
last_thread = tid;
item->sfd = sfd;
item->init_state = init_state;
item->event_flags = event_flags;
item->read_buffer_size = read_buffer_size;
item->transport = transport;
cq_push(thread->new_conn_queue, item);//向工作线程插入工作向
MEMCACHED_CONN_DISPATCH(sfd, thread->thread_id);
if (write(thread->notify_send_fd, "", 1) != 1) {//向通知管道写入数据。
perror("Writing to thread notify pipe");
}
}
}
前面工作线程函数接收管道通知后就开始建立连接，连接的状态设置为EV_READ | EV_PERSIST
由此可知始终只有一个listening线程，其他都是处理工作线程。
页:
[1]