广州项目实施步骤III_练习使用Keepalive保证HaProxy的高可用性
CentOS6.4 配置HAProxy+Keepalived安装HAProxy请参考
http://www.cnblogs.com/kgdxpr/p/3272861.html
安装Keepalived
1、下载安装依赖包
yum install -y wget make gcc openssl-devel popt-devel
2、下载、安装Keepalived
wget http://www.keepalived.org/software/keepalived-1.2.8.tar.gz
tar zxvf keepalived-1.2.8.tar.gz
cd keepalived-1.2.8
./configure --prefix=/usr/local/keepalived
make
make install
3、安装成功后做成服务模式。
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
4、配置文件
mkdir -p /etc/keepalived/
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf
chmod +x /etc/init.d/keepalived
vi /etc/keepalived/keepalived.conf
global_defs {
router_id LVS_DEVEL
}
#监测haproxy进程状态，每2秒执行一次
vrrp_script chk_haproxy {
script "/etc/keepalived/chk_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state MASTER #从服务器为BACKUP
interface eth0
virtual_router_id 51
priority 100 #从服务器要低于100
advert_int 1
mcast_src_ip 10.10.3.171 #MASTER服务器IP,从服务器写从服务器的IP
authentication {
auth_type PASS
auth_pass 111111
}
track_script {
chk_haproxy #监测haproxy进程状态
}
virtual_ipaddress {
10.10.3.170 #虚拟IP
}
}
chk_haproxy.sh内容
vi /etc/keepalived/chk_haproxy.sh
status=$(ps aux|grep haproxy | grep -v grep | grep -v bash | wc -l)
if [ "${status}" = "0" ]; then
/etc/init.d/haproxy start
status2=$(ps aux|grep haproxy | grep -v grep | grep -v bash |wc -l)
if [ "${status2}" = "0"]; then
/etc/init.d/keepalived stop
fi
fi
启动和关闭服务
service keepalived start
service keepalived stop
高可用测试
1、将Master上的keepalived停止
查看Master上的日志
tail -f /var/log/messages
Sep 23 01:24:34 181 Keepalived: Stopping Keepalived v1.2.8 (09/23,2013)
Sep 23 01:24:34 181 Keepalived_vrrp: VRRP_Instance(VI_1) sending 0 priority
Sep 23 01:24:34 181 Keepalived_vrrp: VRRP_Instance(VI_1) removing protocol VIPs.
发现Master释放了VIP
再查看Backup上的日志
Sep 23 01:20:26 182 Keepalived_vrrp: VRRP_Instance(VI_1) Transition to MASTER STATE
Sep 23 01:20:27 182 Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Sep 23 01:20:27 182 Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Sep 23 01:20:27 182 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.3.180
Sep 23 01:20:27 182 Keepalived_healthcheckers: Netlink reflector reports IP 10.10.3.180 added
发现Backup绑定了VIP
2、将Master上的keepalived启动
查看Master上的日志
tail -f /var/log/messages
Sep 23 01:27:56 181 Keepalived_vrrp: VRRP_Instance(VI_1) Entering MASTER STATE
Sep 23 01:27:56 181 Keepalived_vrrp: VRRP_Instance(VI_1) setting protocol VIPs.
Sep 23 01:27:56 181 Keepalived_vrrp: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.3.180
Sep 23 01:27:56 181 Keepalived_healthcheckers: Netlink reflector reports IP 10.10.3.180 added
发现Master绑定了VIP
再查看Backup上的日志
Sep 23 01:21:15 182 Keepalived_vrrp: VRRP_Instance(VI_1) Received higher prio advert
Sep 23 01:21:15 182 Keepalived_vrrp: VRRP_Instance(VI_1) Entering BACKUP STATE
Sep 23 01:21:15 182 Keepalived_vrrp: VRRP_Instance(VI_1) removing protocol VIPs.
Sep 23 01:21:15 182 Keepalived_healthcheckers: Netlink reflector reports IP 10.10.3.180 removed
发现Backup释放了VIP
页:
[1]