SAP NetWeaver 7.02 ABAP Trial Version
InstallationTo install the system, you must be logged on to your PC with administrator privileges.
Depending on the resources of your computer, the installation may take up to 4 hours. Do not interrupt the procedure. If the installation is interrupted, you may continue the current installation. Repeate the stepsand choose "continue old installation".
Before installing SAP NetWeaver 7.02, close all applications. Make sure that no other SAP System is installed on your pc.
[*]Check first the system requirements.
[*]Start the Installer in <extract_folder>\SAP_NetWeaver_702e_Installation_Master\IM_WINDOWS_I386\sapinst.exe.
[*]Choose "SAP Application Server ABAP" --> MaxDB --> Central System --> "Central System".
[*]Follow the instructions and provide the necessary input in the sapinst dialog wizard.
[*]If you start sapinst the first time, you will be logged off your operating system and afterwards prompted for the installation directory of JRE 1.4.latest or 1.5.0_22 (tested).
Do not use 1.6.x! The installation will start, but not finish.
[*]Typically your personal operating system and hardware does not fulfill therecommendations of SAP for the Application Server ABAP and you will be notifiedby sapinst. Ignore it by pressing "Cancel". The installer will continue.For asingle user environment PCs are usually sufficient.
[*]You are prompted for SAPCYPTO.SAR (only available for customers) in case youwant to enable SSL. Typically this is not necessary.
[*]At the end you will get a summary screen. If anything is ok start theinstallation by pressing "Next". You will be informed about installationprogressin "Task Progress"view. logfiles are written in the directory"Program Files\sapinst_instdir".
[*]After the installation has finished, the application server shouldbe started automatically. You may start and stop the server with the SAP Microsoft Management Console. TheApplication Server should appear green in your SAP MMC. If it is grey, start theserver and database. If it is yellow, the server starts. If it is stays yellowthe setup failed or the database (MaxDB Windows Service NSP, Windowsprocess kernel.exe) is down. If it is red, the license is invalid.
[*]Logon on to your system following the next instructions.
Duration of Installation
The installation duration highly depends on your hardware, mainly on yourhard disk. It takes up to 8 hours on a laptop, some hours on a PC and half anhour on a server. So maybe consider to run installation over night.
Error handling
[*]In cases of unsuccesful deinstallation it is necessary to remove existingregistry entries from old installations by executing the registry clean tool(RegistryClean.cmd) before starting the installer. You must also removeunsuccesful MaxDB Deinstallations from registry. If the problem persists, checkthe Trials & Trials discussion forum on SDN.
Uninstalling the Trial version
Sapinst will uninstallthe SAP NetWeaver 7.02 ABAP Trial Version including all content and optional thedatabase instance, the SAP Management Console, registry entries and OS users.
[*]It is recommend to logon as your system admin OS user ("nspadm",installation password).
[*]It is recommended to stop the Application Server before uninstallation.
[*]Open sapinst.exe. Choose "Software Life Cycle Options" --> Uninstall--> Uninstall System.
[*]Provide sapinst.exe with the file location of your system profile directory
[*]Provide the credentials of system (and optional database) users.
[*]Start uninstallation.
Getting started
The SAP System ID (SSID) for this Trial version is NSP with System Nr 00 and cannot be changed. Make sure your Application Server is up and running using SAP Management Console.
After installing the application server you can log into the system via web gui at http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000 with user bcuser and password minisap.�
To install the SAP Logon follow the instructions below.
Installing the SAP GUI for Windows (SAP frontend)
To log on to the system use the SAP GUI. The installer is included in this download and available in <extract_folder>\GUI. This is the right version for the AS ABAP 7.02.�
[*]For Windows GUI Click on SAP_GUI_for_Windows.exeto start the installation process.�
[*]During the SAP GUI installation process a shortcut "SAP logon" has been placed on your desktop. Double click this icon to start SAP Logon.
[*]To create a new entry for the NSP system, click on New Item...
http://www.cnblogs.com/duanxz/layout/saplogon01.gif
[*]Select User Specified System and chooseNext.
http://www.cnblogs.com/duanxz/layout/saplogon02.gif
[*]Enter the values as shown in the figure below. Afterwards click onFinish.
http://www.cnblogs.com/duanxz/layout/saplogon03.gif
[*]You can logon the system by selecting the new created entry and click onLog on.
http://www.cnblogs.com/duanxz/layout/saplogon04.gif
Default client is "001". This is theso called productive client, which should be used for daily work. Client 000 isfor administrative tasks. Only use燼s experienced user
Two users are prenstalled: DDIC and SAP*.Use the password that you provided during installation or use Standard password"19920706" for DDIC.
[*]The DDICuser is intended for certain system administrationand maintenance tasks. Only use DDIC as experienced user.
[*]SAP* is a SAP defualt user and typically used for certain administrativetasks.燨nly use SAP* as experienced user.
[*]Purpose of the BCUSER is to develop applications andmaintain the system. If you create or modify SAP objects within the customernamespace (starting with Y or Z), you need to enter the developer key for thisuser: 29671482393151224771. Enter when prompted. This is not anaccess keys to modify all objects. You have to create this user yourself. Seenext page "Create BCUSER".
[*]
Installing the MaxDB Database Manager and SQL Studio
The setup for MaxDB Database Manager and MaxDB SQLStudio can be found under MaxDBTools. In order to install the MaxDB Database Managerexecute DBM76.exe, if you wish to install the SQL Studioexecute SQLSTD76.exe.�
The database administrator user for MaxDB Database Manager�is control with the master password specified duringinstallation. For the SQL Studio the username is SAPNSP and themaster password. The user for the system database schema is SAPNSPDB andinstallation master password.
Proceed as follows to connect to the NSP database by MaxDB DatabaseManager:
[*]Install the database manager as described above.
[*]Double click the Database Manager icon that should beplaced on your desktop now. Alternatively use Windows Startmenu under Programs -> MaxDB -> Database Manager
[*]In the upcoming Database Manager click onAdd...
http://www.cnblogs.com/duanxz/layout/maxdb_01.gif
[*]A pop-up window appears. Click on Add
http://www.cnblogs.com/duanxz/layout/maxdb_02.gif
[*]The NSP database instance is displayed. Click on OK toconfirm this dialog.
http://www.cnblogs.com/duanxz/layout/maxdb_03.gif
[*]An entry for the NSP database is added to the main window. Double-click theNSP entry
http://www.cnblogs.com/duanxz/layout/maxdb_04.gif
[*]Logon to the NSP instace with the values depicted below. The password is theMaster Password you provided during theinstallation.
http://www.cnblogs.com/duanxz/layout/maxdb_05.gif
Now your connected to the database instace NSP. You can check and configuredatabase specific parameters here.
To get connected using the SQL Studio accomplish the following steps:
[*]Install the SQL studio (SQLSTD76.exe) as described above.
[*]Double click the SQL Studio icon that should be placed onyour desktop now. Alternatively use Windows Start menu underPrograms -> MaxDB -> SQL Studio
[*]click the http://www.cnblogs.com/duanxz/layout/sql_01.gif � (Connect) buttonor choose Session -> Connectfrom the menu.
[*]Provide the values as depicted below. The password refers to theMaster Password you entered during theinstallation.
http://www.cnblogs.com/duanxz/layout/sql_02.gif
The SQL Studio allows you to browse and manipulate MaxDb andSAP system� database table. Never modify SAP system tables! The system maybecome unstable or unusable.
Installing a new license
To install a Trial license into� your NSP system proceed as follows:.
[*]The first step is to obtain the Hardware Key. Log into the systemwith SAP_ALL privileges and click on Administer SAP Licenses or use thetransaction code SLICENSE. The picture below shows where to find theActive Hardware Key (for further information see also here).
[*]http://www.cnblogs.com/duanxz/layout/lic_01.gif
[*]Fill out the form on the http://www.sap.com/minisap page. Provide the details asfollows: Enter Salutation, First Name,Last Name, a valid Email address, and theSDN User Id in order to receive the license. ChooseNSP - SAP NetWeaver 7.0/2004s (SP9 and higher) asSystem ID and provide the Hardware keyyoujust obtained from the system.
[*]After some minutes you will receive an email with the license file attached.Store the attached file on your hard disk and go back to the SLICENSEtransaction.
[*]Make sure that the correct screen is displayed (screen caption is SAPLicense Administration # Digitally-Signed License Keys). If not, changethe screen by clicking the New Licenses button. Click theInstall button.�
http://www.cnblogs.com/duanxz/layout/lic_04.gif
[*]Select the previously stored license key file and click on Open. Thenew license will be installed.
Welcome to SAP NetWeaver 7.02 ABAP Trial Version
Login via SAP GUI
Default client is "001". Client 000 is typically for system wide administrative tasks. Two users are prenstalled: DDIC (Installer PW: 19920706) and SAP* (Installer PW: 06071992). Password may be changed, to the one you provided during installation.
The DDIC user is intended for certain system administration and maintenance tasks. Only use DDIC as experienced user. SAP* is a special administrative user, not used in Trial/Trial systems.� Only use SAP* as experienced user, e.g. to log into a system without valid license key.
BCUSER in Client 001 is preshipped with password: abcd1234. Change with Transaction SU01. If not you have to create your development user: BCUSER. Purpose of the BCUSER is to develop applications and maintain the system. If you create or modify SAP objects within the customer namespace (starting with Y or Z), you need to enter the developer key for this user: 29671482393151224771(Remark: valid after you installed the licensekey. If your system type is "initial" enter: 07222097363139263004). Enter when prompted. (Remark: This is not an access keys to modify SAP objects. Custom development namespace is Z* or Y*).
[*]Login into your system, client 001 with user DDIC
[*]type in "SU01" into transaction field. You are redirected to transaction user maintenance.
[*]Usually you have to maintain company adress first. Type in your company and press ok.
[*]type in user "BCUSER" and press "create". Provide Profile "SAP_ALL" and your initial password (usually "initial" as you have to change it next time.).
[*]press save. log off and login again with your BCUSER. You are prompted to change your password.
Activate ICF - Internet Communication Framework (optional)
For web development, call Transaction SICF. Check that sap\bd\icf service is activated.
Activate Logon Language DE (German) (optional)
call Transaction SE38. Run report RSCPINST and add language DE. Then press activat:
SE38 -> RSCPINST -> Add -> "DE" -> Activate
For logon, you may also add a profile parameter in your default.pfl or directly in trasnaction RZ10 (optional) zcsa/installed_languages = DE , where D is german and E is English.
Contains
This package contains all you need to learn ABAP based development with SAP NetWeaver. The following components are included:
[*]SAP NetWeaver 7.02 SP06 AS ABAP Application Server
[*]MaxDB 7.8 database with MaxDB Database Manager and SQL Studio or new MaxDb Studio
[*]Compact SAP GUI for Windows 7.20
What to expect
This product is a special Trial andevaluation version, so restrictions regarding support and features apply. Ourintention for this product is only to let you experience the ABAP developmentcapabilities of SAP NetWeaver.
Please keep in mind that applications developed with this Trial version mustnot be transported into productive running SAP systems.
For feedback, community support through discussion forums or additionalinformation, including tutorials or collaboration areas please visit the ABAParea of the SAP Developer Network.
Legal Disclaimer
The information in this Trial is confidential and proprietary to SAP and maynot be disclosed without the permission of SAP. This Trial is not subject toyour license agreement or any other service or subscription agreement with SAP.SAP has no obligation to pursue any course of business outlined in this documentor any related Trial, or to develop or release any functionality mentionedtherein. This document, or any related Trial and SAP's strategy and possiblefuture developments, products and/or platforms directions and functionality areall subject to change and may be changed by SAP at any time for any reasonwithout notice. The information on this document is not a commitment, promise orlegal obligation to deliver any material, code or functionality. This documentis provided without a warranty of any kind, either express or implied, includingbut not limited to, the implied warranties of merchantability, fitness for aparticular purpose, or non-infringement. This document is for informationalpurposes and may not be incorporated into a contract. SAP assumes noresponsibility for errors or omissions in this document, and shall have noliability for damages of any kind including without limitation direct, special,indirect, or consequential damages that may result from the use of thisdocument. This limitation shall not apply in cases of intent or grossnegligence. All forward-looking statements are subject to various risks anduncertainties that could cause actual results to differ materially fromexpectations. Readers are cautioned not to place undue reliance on theseforward-looking statements, which speak only as of their dates, and they shouldnot be relied upon in making purchasing decisions.
SAP Developer Network
http://www.cnblogs.com/duanxz/layout/image006.jpg Come to the SAP Developer Network for tutorials, examples and how-to guides on building applications with SAP NetWeaver.�
The SAP Developer Network is a collaborative community supporting the SAPdeveloper ecosystem.� SAP is committed to providing the tools and forum tofacilitate the transfer of knowledge and information between developers insideand outside SAP.
The SAP Developer Network offers technical articles, web training, codesamples, evaluation systems, special interest groups and developer-specificevents, in addition to detailed technical reference materials.
页:
[1]