Cacti 配置测试
Cacti 配置测试参考资料：
CentOS yum安装RRDtool
http://www.iyunv.com/Linux/2011-05/36338.htm
CentOS5.4（64bit）下安装配置Cacti----SNMP+RRDTool安装配置（RPM安装）
http://blog.iyunv.com/mintazoedeng/article/details/8542189
使用Cacti监控你的网络（二）- Cacti的安装
http://blog.sina.com.cn/s/blog_4e424e2101000b5y.html
Cacti中文版安装配置
http://blog.163.com/class5steven@126/blog/static/71962690201292083212805/
安装Cacti监控系统
https://wiki.freebsdchina.org/howto/c/cactiinit
cacti无图无数据等常见问题排查
http://www.cnblogs.com/taosim/articles/2557762.html
CACTI ：有图无数据解决办法
http://blog.iyunv.com/kk185800961/article/details/45347501
cacti不能获取数据或者显示图经常碰到的问题
http://blog.iyunv.com/luckyboy008/article/details/12072647
用 Cacti 监视 Linux 服务器
http://www.vpsee.com/2009/08/use-cacti-to-monitor-servers/
Cacti突然获取不到数据一例的解决办法
http://www.iyunv.com/Linux/2012-09/71021.htm
系统环境：
# uname -a
Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT 2010 i686 athlon i386 GNU/Linux
# ifconfig
eth0:0 inet addr:192.168.3.133Bcast:192.168.3.255Mask:255.255.255.0
目标：cacti安装虚拟机：192.168.3.133
被监视虚拟机：192.168.3.131 和 192.168.3.153
通过测试了解安装和配置Cacti。
测试开始：
被监控主机安装snmp，并配置被监视虚拟机
192.168.3.131 和 192.168.3.153
#检查一下是否已安装，没有
# rpm -qa |grepsnmp
#安装net-snmp以及依赖包lm_sensors
# yum -y install net-snmp lm_sensors
#安装后检查一下
# rpm -qa |grepsnmp
net-snmp-libs-5.3.2.2-25.el5_11
net-snmp-5.3.2.2-25.el5_11
#修改配置
# vi /etc/snmp/snmpd.conf
# First, map the community name "public" into a "security name"
# sec.namesource community
#com2sec notConfigUserdefault public
#修改public为cacti123
com2sec notConfigUserdefault cacti123
# group context sec.model sec.level prefix read writenotif
accessnotConfigGroup "" any noauth exactsystemview none none
#修改systemview为all
accessnotConfigGroup "" any noauth exactallnone none
view all included.1 80
#如果开了防火墙，则需要添加防火墙策略
# iptables -I INPUT -p udp --dport 161 -j ACCEPT
# iptables -I INPUT -p tcp --dport 199 -j ACCEPT
# service iptables save
#或者关闭防火墙
# vi /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
#SELINUX=permissive
SELINUX=disabled #设置为disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
"/etc/selinux/config" 11L, 467C written
#启动snmp服务
# service snmpd start
# chkconfig snmpd on
#重启snmpd服务
# service snmpd restart
Stopping snmpd:
Starting snmpd:
#测试snmp 192.168.3.131
# snmpwalk -v 1 192.168.3.131 -c cacti123 system
SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT 2010 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1166731) 3:14:27.31
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.6 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.7 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.8 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (4) 0:00:00.04
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (4) 0:00:00.04
#测试snmpd 192.168.3.153，没有成功。经查原因是192.168.3.153上防火墙的问题
# snmpwalk -v 1 192.168.3.153 -c cacti123 system
Timeout: No Response from 192.168.3.153
#虚拟机192.168.3.153上查看防火墙状态
# /etc/init.d/iptables status
Table: filter
Chain INPUT (policy ACCEPT)
numtarget prot opt source destination
1 RH-Firewall-1-INPUTall--0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
numtarget prot opt source destination
1 RH-Firewall-1-INPUTall--0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
numtarget prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
numtarget prot opt source destination
1 ACCEPT all--0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp --0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT esp--0.0.0.0/0 0.0.0.0/0
4 ACCEPT ah --0.0.0.0/0 0.0.0.0/0
5 ACCEPT udp--0.0.0.0/0 224.0.0.251 udp dpt:5353
6 ACCEPT udp--0.0.0.0/0 0.0.0.0/0 udp dpt:631
7 ACCEPT tcp--0.0.0.0/0 0.0.0.0/0 tcp dpt:631
8 ACCEPT all--0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
9 ACCEPT tcp--0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
10 ACCEPT tcp--0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:1158
11 ACCEPT udp--0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:1158
12 ACCEPT tcp--0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:1521
13 ACCEPT udp--0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:1521
14 ACCEPT tcp--0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:5501
15 ACCEPT udp--0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:5501
16 REJECT all--0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
#虚拟机上192.168.3.153停用防火墙
# service iptables stop
Flushing firewall rules:
Setting chains to policy ACCEPT: filter
Unloading iptables modules:
# /etc/init.d/iptables status
Firewall is stopped.
#回到192.168.3.133上，测试snmp 192.168.3.153
# snmpwalk -v 1 192.168.3.153 -c cacti123 system
SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:35 EDT 2010 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (79336) 0:13:13.36
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.6 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.7 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.8 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (2) 0:00:00.02
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (3) 0:00:00.03
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (3) 0:00:00.03
在虚拟机192.168.3.133上安装cacti
虚拟系统是直接拷贝上次做的LAMP虚拟环境，这边就不再重新安装apache，mysql，php了。
#tomcat版本
# rpm -qa |grephttpd
httpd-2.2.3-91.el5.centos#php版本
# rpm -qa |grepphp
php-mysql-5.1.6-45.el5_11
php-devel-5.1.6-45.el5_11
php-common-5.1.6-45.el5_11
php-5.1.6-45.el5_11
php-cli-5.1.6-45.el5_11
php-pdo-5.1.6-45.el5_11#mysql版本
# rpm -qa |grepmysql
php-mysql-5.1.6-45.el5_11
mysql-5.0.95-5.el5_9
mysql-server-5.0.95-5.el5_9
#先安装依赖包
# yum -y install net-snmp net-snmp-devel net-snmp-utils net-snmp-libs lm_sensors php-xml zlib libpng freetype cairo-devel pango-devel gd
#安装rrdtool
配安装源
# cd /etc/yum.repos.d/
# vi CentOS-Base.repo
在文件的末尾，添加
--------------------------------
#20130128 insert
name=Dag RPM Repostory for Red Hat Enterprise Linux
baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag
gpgcheck=1
gpgkey=http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt
enabled=1
--------------------------------
这样就可以用yum来安装了。这样就能一下安装相关的依赖包等内容了。
#安装相关依赖
# yum install ntp vim-enhanced gcc gcc-c++ gcc-g77 flex bison autoconf automake bzip2-devel ncurses-devel zlib-devel libjpeg-devel libpng-devel libtiff-devel freetype-devel libXpm-devel gettext-develpam-devel
....
Installed:
bzip2-devel.i386 0:1.0.3-6.el5_5 gettext-devel.i386 0:0.17-1.el5
libXpm-devel.i386 0:3.5.5-3 libjpeg-devel.i386 0:6b-38
libtiff-devel.i386 0:3.8.2-19.el5_10 ncurses-devel.i386 0:5.5-24.20060715
pam-devel.i386 0:0.99.6.2-14.el5_11 vim-enhanced.i386 2:7.0.109-7.2.el5
Dependency Installed:
vim-common.i386 2:7.0.109-7.2.el5
Updated:
automake.noarch 0:1.9.6-3.el5 gcc.i386 0:4.1.2-55.el5 gcc-c++.i386 0:4.1.2-55.el5
ntp.i386 0:4.2.2p1-18.el5.centos
Dependency Updated:
cpp.i386 0:4.1.2-55.el5 gcc-gfortran.i386 0:4.1.2-55.el5
gettext.i386 0:0.17-1.el5 libgcc.i386 0:4.1.2-55.el5
libgfortran.i386 0:4.1.2-55.el5 libstdc++.i386 0:4.1.2-55.el5
libstdc++-devel.i386 0:4.1.2-55.el5 libtiff.i386 0:3.8.2-19.el5_10
pam.i386 0:0.99.6.2-14.el5_11
Complete!
#安装rrdtool
# yum install -y rrdtool perl-rrdtool rrdtool-devel
......
Installed:
perl-rrdtool.i386 0:1.4.7-1.el5.rf rrdtool.i386 0:1.4.7-1.el5.rf
rrdtool-devel.i386 0:1.4.7-1.el5.rf
Dependency Installed:
libdbi.i386 0:0.8.1-2.1 lua.i386 0:5.1.4-2.el5.rf ruby.i386 0:1.8.5-31.el5_9
ruby-libs.i386 0:1.8.5-31.el5_9
Complete!
#修改apache配置
# cd /etc/httpd/conf
You have new mail in /var/spool/mail/root
# ls
httpd.confhttpd.conf~magic
# vi httpd.conf
#
DirectoryIndex index.html index.html.var index.php
#在最后加上一段，注意路径
<VirtualHost *:80>
ServerAdmin root@localhost
DocumentRoot "/var/www/html/cacti"
ServerName 192.168.3.133
</VirtualHost>
#修改php的配置文件，php的配置文件:/etc/php.ini
#修改时区参数
; Defines the default timezone used by the date functions
;date.timezone = "Asia/Shanghai"
#安装cacti
从cacti官网下载http://cacti.net/所需软件
# cd /mnt/hgfs/sharefiles/cacti/
# ls
cacti-0.8.8f.tar.gzrrdtool-1.4.5.tar.gz
#通过yum安装的rrdtool版本还高一点
# rpm -qa |grep rrdtool
perl-rrdtool-1.4.7-1.el5.rf
rrdtool-1.4.7-1.el5.rf
rrdtool-devel-1.4.7-1.el5.rf
#创建文件夹，解压缩文件
# mkdir /usr/src/cacti
# tar -xzf cacti-0.8.8f.tar.gz -C /usr/src/cacti
#移动文件至WEB根路径下，后面的试验表明文件拷贝错误了，
#应该将/usr/src/cacti/cacti-0.8.8f/下的所有文件拷贝至/var/www/html/cacti目录下，
#而不是cacti-0.8.8f这个文件夹，请参考后面的修改操作
# mkdir /var/www/html/cacti
# mv /usr/src/cacti/cacti-0.8.8f/ /var/www/html/cacti
#补充：我想应该用cp命令可能会比较好一些
# cp -r /usr/src/cacti/cacti-0.8.8f/ /var/www/html/cacti
#Apache默认以daemon用户及组身份启动，修改目录权限
# chown -R daemon.daemon /var/www/html/cacti
#修改防火墙配置
# iptables -I INPUT -p tcp --dport 80 -j ACCEPT
# service iptables save
Saving firewall rules to /etc/sysconfig/iptables:
#重启apache
# service httpd restart
Stopping httpd:
Starting httpd:
#mysql配置
#mysql数据库中创建名为cacti的数据库，
#创建cactiuser用户,并赋予其访问cacti数据库的所有权限,该账号密码为cacti123
# /usr/bin/mysqladmin -u root -p create cacti
Enter password: 输入数据库root的密码
# cd /var/www/html/cacti
# cd cacti-0.8.8f/
# /usr/bin/mysql -u root -p cacti <cacti.sql
Enter password:
#登录mysql
# /usr/bin/mysql -u root -p
Enter password:
Welcome to the MySQL monitor.Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 5.0.95 Source distribution
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> GRANT ALL ON cacti.* TO cactiuser@localhost IDENTIFIED BY 'cacti123';
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
mysql> exit
Bye
#修改cacti配置文件中的数据库参数资料
# cd include/
# pwd
/var/www/html/cacti/cacti-0.8.8f/include
#
# vi config.php
#找到下面的参数
/* make sure these values refect your actual database/host/user/password */
$database_type = "mysql";
$database_default = "cacti";
$database_hostname = "localhost";
$database_username = "cactiuser";
$database_password = "cactiuser";
$database_port = "3306";
$database_ssl = false;
#这里mysql用户cactiuser的密码不对，需修改
$database_password = "cactiuser";
#改为
$database_password = "cacti123";
重启apache服务看不到cacti页面
http://192.168.3.133/cacti
#经查发现cacti的路径不对
# ls
cactiphpinfo.phptestdb.php
#将/usr/src/cacti/cacti-0.8.8f/下的所有文件拷贝至/var/www/html/cacti目录下
#修改后的路径
# cd /var/www/html/cacti
# ls
about.php gprint_presets.php images resource
auth_changepassword.phpgraph_image.php include rra
auth_login.php graph.php index.php rra.php
cacti-0.8.8f graph_settings.php install scripts
cacti.sql graphs_items.php lib script_server.php
cdef.php graphs_new.php LICENSE script_server.pl
cli graphs.php log settings.php
cmd.php graph_templates_inputs.phplogout.php templates_export.php
color.php graph_templates_items.php plugins templates_import.php
data_input.php graph_templates.php plugins.php tree.php
data_queries.php graph_view.php poller_commands.phpuser_admin.php
data_sources.php graph_xport.php poller_export.php utilities.php
data_templates.php host.php poller.php
docs host_templates.php README
启动服务，然后访问http://ip/cacti开始安装cacti
#service mysqld start
#service httpd start
#service snmpd start
# pwd
/var/www/html/cacti
#将/usr/src/cacti/cacti-0.8.8f/下的所有文件拷贝至/var/www/html/cacti目录下后
#重启apache服务就可以看到cacti页面了
http://192.168.3.133/cacti
#页面会跳转安装步骤
http://192.168.3.133/cacti/install/
#第一次登录，cacti会强制修改密码
用户名：admin
密码：cacti123456
#进入cacti管理界面
Devices ADD 新的Graph
Save
ADD 第二个
Create
Create
#一开始无图，然后处理后有无数据，后面开始查资料：
cacti无图像或者无数据，网上查到的检查
1.system utilities –>Rebuild poller cache
2.系统时间不准确，重新设置时间
3.图像没有生成，运行#/usr/bin/php /srv/www/htdocs/cacti/poller.php –force
4.权限问题，修改权限#chmod 777 -R /srv/www/htdocs/cacti/rra
5.数据库表有损坏，修复#mysqlcheck -ao cacti –auto-repair -uroot -p
6.重启snmpd服务#service snmpd restart
# cd /var/www/html/cacti
# cd include
#解决cacti中无图或无数据的问题
snmpwalk -v 2c -c public yourIP if
#我的修改
snmpwalk -v 2c -c cacti123 192.168.3.131 if
snmpwalk -v 2c -c cacti123 192.168.3.153 if
#分别处理
# snmpwalk -v 2c -c cacti123 192.168.3.131 if
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 1000000000
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: 0:c:29:7f:b0:a4
IF-MIB::ifPhysAddress.3 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 2761494
IF-MIB::ifInOctets.2 = Counter32: 513546
IF-MIB::ifInOctets.3 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 1692
IF-MIB::ifInUcastPkts.2 = Counter32: 4678
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 0
IF-MIB::ifInDiscards.3 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 2761494
IF-MIB::ifOutOctets.2 = Counter32: 88383
IF-MIB::ifOutOctets.3 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 1692
IF-MIB::ifOutUcastPkts.2 = Counter32: 932
IF-MIB::ifOutUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
# snmpwalk -v 2c -c cacti123 192.168.3.153 if
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 1000000000
IF-MIB::ifSpeed.3 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: 0:c:29:c5:f5:d
IF-MIB::ifPhysAddress.3 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 3295661
IF-MIB::ifInOctets.2 = Counter32: 513787
IF-MIB::ifInOctets.3 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 14736
IF-MIB::ifInUcastPkts.2 = Counter32: 4718
IF-MIB::ifInUcastPkts.3 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 0
IF-MIB::ifInDiscards.3 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 3295661
IF-MIB::ifOutOctets.2 = Counter32: 113442
IF-MIB::ifOutOctets.3 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 14736
IF-MIB::ifOutUcastPkts.2 = Counter32: 1010
IF-MIB::ifOutUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
——后面有图，但是无数据，继续排查
#有图无数据的处理
/usr/bin/php /var/www/html/cacti/poller.php –force
# /usr/bin/php /var/www/html/cacti/poller.php --force
OK u:0.01 s:0.02 r:0.60
OK u:0.01 s:0.02 r:0.61
OK u:0.01 s:0.02 r:0.70
OK u:0.01 s:0.02 r:0.70
OK u:0.01 s:0.02 r:0.73
OK u:0.01 s:0.02 r:0.73
OK u:0.01 s:0.02 r:0.80
OK u:0.01 s:0.03 r:0.80
OK u:0.01 s:0.03 r:1.00
OK u:0.01 s:0.03 r:1.00
OK u:0.01 s:0.03 r:1.78
OK u:0.01 s:0.03 r:1.78
OK u:0.01 s:0.03 r:1.93
OK u:0.01 s:0.03 r:1.93
OK u:0.01 s:0.03 r:2.03
OK u:0.01 s:0.03 r:2.03
OK u:0.01 s:0.03 r:2.26
OK u:0.01 s:0.03 r:2.26
OK u:0.01 s:0.03 r:2.38
OK u:0.01 s:0.03 r:2.38
OK u:0.01 s:0.03 r:2.56
OK u:0.01 s:0.03 r:2.56
OK u:0.01 s:0.03 r:2.63
OK u:0.01 s:0.03 r:2.63
OK u:0.01 s:0.03 r:2.74
OK u:0.01 s:0.03 r:2.74
OK u:0.01 s:0.03 r:2.80
OK u:0.01 s:0.03 r:2.80
OK u:0.01 s:0.03 r:2.91
OK u:0.01 s:0.03 r:3.01
OK u:0.01 s:0.03 r:3.08
OK u:0.01 s:0.03 r:3.13
OK u:0.01 s:0.03 r:3.29
OK u:0.01 s:0.04 r:3.50
OK u:0.01 s:0.04 r:3.97
OK u:0.01 s:0.04 r:3.97
OK u:0.01 s:0.04 r:4.04
OK u:0.01 s:0.04 r:4.04
OK u:0.01 s:0.04 r:4.30
OK u:0.01 s:0.04 r:4.30
OK u:0.01 s:0.04 r:4.61
OK u:0.01 s:0.04 r:4.61
OK u:0.02 s:0.04 r:4.71
OK u:0.02 s:0.04 r:4.71
OK u:0.02 s:0.04 r:4.82
OK u:0.02 s:0.04 r:4.82
OK u:0.02 s:0.05 r:4.94
OK u:0.02 s:0.05 r:4.94
OK u:0.02 s:0.05 r:5.10
OK u:0.02 s:0.05 r:5.10
OK u:0.02 s:0.05 r:5.21
OK u:0.02 s:0.05 r:5.23
OK u:0.02 s:0.05 r:5.32
OK u:0.02 s:0.05 r:5.39
OK u:0.02 s:0.05 r:5.51
OK u:0.02 s:0.05 r:5.65
OK u:0.02 s:0.05 r:5.71
OK u:0.02 s:0.05 r:5.78
10/28/2015 11:52:23 AM - SYSTEM STATS: Time:5.9279 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
#书上抄的，大概意思是5分钟执行一次 crontab -e
*/5 * * * */usr/bin/php /var/www/html/cacti/poller.php
#登录mysql检查一下
# /usr/bin/mysql -u cactiuser -p
Enter password: cacti123
Welcome to the MySQL monitor.Commands end with ; or \g.
Your MySQL connection id is 31
Server version: 5.0.95 Source distribution
Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> select database();
+------------+
| database() |
+------------+
| NULL |
+------------+
1 row in set (0.00 sec)
mysql> status;
--------------
/usr/bin/mysqlVer 14.12 Distrib 5.0.95, for redhat-linux-gnu (i386) using readline 5.1
Connection id: 31
Current database:
Current user: cactiuser@localhost
SSL: Not in use
Current pager: stdout
Using outfile: ''
Using delimiter: ;
Server version: 5.0.95 Source distribution
Protocol version: 10
Connection: Localhost via UNIX socket
Server characterset: latin1
Db characterset: latin1
Client characterset: latin1
Conn.characterset: latin1
UNIX socket: /var/lib/mysql/mysql.sock
Uptime: 1 hour 46 min 9 sec
Threads: 7Questions: 22588Slow queries: 0Opens: 77Flush tables: 1Open tables: 64Queries per second avg: 3.547
--------------
mysql> show tables;
ERROR 1046 (3D000): No database selected
#查一下数据库
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| cacti |
| test |
+--------------------+
3 rows in set (0.01 sec)
#切换数据库至cacti
mysql> use cacti
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
#查一下表
mysql> show tables;
+---------------------------+
| Tables_in_cacti |
+---------------------------+
| cdef |
| cdef_items |
| colors |
| data_input |
| data_input_data |
| data_input_fields |
| data_local |
| data_template |
| data_template_data |
| data_template_data_rra |
| data_template_rrd |
| graph_local |
| graph_template_input |
| graph_template_input_defs |
| graph_templates |
| graph_templates_gprint |
| graph_templates_graph |
| graph_templates_item |
| graph_tree |
| graph_tree_items |
| host |
| host_graph |
| host_snmp_cache |
| host_snmp_query |
| host_template |
| host_template_graph |
| host_template_snmp_query|
| plugin_config |
| plugin_db_changes |
| plugin_hooks |
| plugin_realms |
| poller |
| poller_command |
| poller_item |
| poller_output |
| poller_reindex |
| poller_time |
| rra |
| rra_cf |
| settings |
| settings_graphs |
| settings_tree |
| snmp_query |
| snmp_query_graph |
| snmp_query_graph_rrd |
| snmp_query_graph_rrd_sv |
| snmp_query_graph_sv |
| user_auth |
| user_auth_perms |
| user_auth_realm |
| user_log |
| version |
+---------------------------+
52 rows in set (0.01 sec)
#查看数据库记录poller的执行时间是空的
mysql> select * from poller_time;
Empty set (0.00 sec)
#执行# /usr/bin/php /var/www/html/cacti/poller.php --force 后
#再次查看数据库
# /usr/bin/mysql -u cactiuser -p
Enter password: cacti123
mysql> use cacti
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
#查看数据库记录poller的执行时间
mysql> select * from poller_time;
+----+-------+-----------+---------------------+---------------------+
| id | pid | poller_id | start_time | end_time |
+----+-------+-----------+---------------------+---------------------+
|1 | 19470 | 0 | 2015-10-27 21:25:01 | 2015-10-27 21:25:05 |
+----+-------+-----------+---------------------+---------------------+
1 row in set (0.00 sec)
#过一会再查，增加了5分钟
mysql> select * from poller_time;
+----+-------+-----------+---------------------+---------------------+
| id | pid | poller_id | start_time | end_time |
+----+-------+-----------+---------------------+---------------------+
|1 | 19627 | 0 | 2015-10-27 21:30:02 | 2015-10-27 21:30:05 |
+----+-------+-----------+---------------------+---------------------+
1 row in set (0.00 sec)
#查看cacti日志
# pwd
/var/www/html/cacti/log
# cat cacti.log
10/28/2015 11:52:23 AM - SYSTEM STATS: Time:5.9279 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
10/28/2015 12:25:01 PM - POLLER: Poller WARNING: Cron is out of sync with the Poller Interval!The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 1964 seconds have passed since the last poll!
10/28/2015 12:25:05 PM - SYSTEM STATS: Time:3.6730 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
10/28/2015 12:30:05 PM - SYSTEM STATS: Time:3.8174 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
10/28/2015 12:35:06 PM - SYSTEM STATS: Time:4.2797 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
10/28/2015 12:40:06 PM - SYSTEM STATS: Time:4.1686 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
10/28/2015 12:45:05 PM - SYSTEM STATS: Time:4.2167 Method:cmd.php Processes:1 Threads:N/A Hosts:4 HostsPerProcess:4 DataSources:35 RRDsProcessed:29
You have new mail in /var/spool/mail/root
//-----------------------//
#添加中文字体支持，CentOS下直接yum安装中文支持
# yum install fonts-chinese
Installed:
fonts-chinese.noarch 0:3.02-12.el5
Complete!
打开Cacti，控制面板->配置->设置->路径：
将RRDTool默认字体路径设为/usr/share/fonts/chinese/TrueType/ukai.ttf
配置无误，会显示文件已找到。
——没测试
设置计划任务
#crontab –e
追加以下内容
*/5 * * * * php /var/www/cacti/poller.php >/dev/null &2>1
#虚拟机上直接浏览
#物理机上浏览
#过一会的图
页:
[1]