华为9300 、华三5500 传输网Qinq配置
如上图，要将CE－c的vlan 20 通过P网络传输到CE－a ，大大网中使用vlan为1000只要在PE端配置相关数据即可，CE端无需操作可以是hybird 或者trunk都可以
华三5500配置interface Ten-GigabitEthernet1/2/1 port link-mode bridge description nbdx port link-type hybrid undo port hybrid vlan 1 port hybrid vlan 77 88 91 to 93 100 111 to 112 122 260 tagged port hybrid vlan 1000 untagged qinq enable qinq vid 1000raw-vlan-id inbound20 99 2403
华为9300配置
interface Eth-Trunk60 undo port hybrid vlan 1 port hybrid tagged vlan 99 244 to 246 251 271 273 986 1002 4001 port hybrid untagged vlan 1000 port vlan-stacking vlan 20 stack-vlan 1000port vlan-stacking vlan 99 stack-vlan 1000 port vlan-stacking vlan 2403 stack-vlan 1000
页:
[1]