Linux安装PHP加速器Xcache
XCache 是一个又快又稳定的 PHP opcoolcode 缓存器. 经过良好的测试并在大流量/高负载的生产机器上稳定运行. 经过(在linux 上)测试并支持所有现行 PHP 分支的最新发布版本, 如 PHP_4_3 PHP_4_4 PHP_5_0 PHP_5_1 PHP_5_2 HEAD(6.x), 并支持线程安全/Windows. 与同类 opcoolcode 缓存器相比更胜一筹, 比如能够快速跟进 PHP 版本.下面介绍如何安装配置。1、安装xcache
[*]wget http://xcache.lighttpd.net/pub/Releases/1.3.2/xcache-1.3.2.tar.gz
[*]tar -zxvf xcache-1.3.2.tar.gz
[*]cd xcache-1.3.2
[*]phpize
[*]./configure --enable-xcache
[*]make
[*]make install
2、配置xcache
打开php.ini文件，增加如下代码：
[*]
[*]; change me - 64 bit php => /usr/lib64/php/modules/xcache.so
[*]; 32 bit php => /usr/lib/php/modules/xcache.so
[*]zend_extension = /usr/lib64/php/modules/xcache.so
[*]
[*]
[*]xcache.admin.auth = On
[*]xcache.admin.user = "mOo"
[*]; xcache.admin.pass = md5($your_password)
[*]xcache.admin.pass = ""
[*]
[*]
[*]xcache.shm_scheme = "mmap"
[*]xcache.size= 32M
[*]xcache.count = 1
[*]xcache.slots = 8K
[*]xcache.ttl = 3600
[*]xcache.gc_interval = 300
[*]
[*]; Same as aboves but for variable cache
[*]; If you don't know for sure that you need this, you probably don't
[*]xcache.var_size= 0M
[*]xcache.var_count = 1
[*]xcache.var_slots = 8K
[*]xcache.var_ttl = 0
[*]xcache.var_maxttl = 0
[*]xcache.var_gc_interval = 300
[*]
[*]; N/A for /dev/zero
[*]xcache.readonly_protection = Off
[*]
[*]xcache.mmap_path = "/dev/zero"
[*]
[*]xcache.cacher = On
[*]xcache.stat = On
注意修改zend_extension = /usr/lib64/php/modules/xcache.so为正确的路径。
详情的配置说明：http://xcache.lighttpd.net/wiki/XcacheIni
页:
[1]