cloudstack二级存储部署（四）
下边是二级存储服务器部署配置二级存储1：安装服务包# yum -y install rpcbind nfs-utils2：创建共享目录# mkdir /secondary
3：创建配置文件# vim /etc/exports
/secondary 192.168.1.0/24(rw,no_root_squash)
4：确定端口是否被占用# netstat -anptu | grep 1012
# netstat -anptu | grep 1013
5：将nfs端口固定mountd 1012/tcp # rpc.mountd
mountd 1012/udp # rpc.mountd
rquotad 1013/tcp # rpc.rquotad
rquotad 1013/udp # rpc.rquotad
6：配置防火墙# vim /etc/sysconfig/iptables
-A INPUT -s 192.168.1.0/24 -p tcp -m multiport --dports 111,2049,1012,1013,32768 -j ACCEPT
-A INPUT -s 192.168.1.0/24 -p udp -m multiport --dports 111,2019,1012,1013,32768 -j ACCEPT
# service iptables restart
7：启动nfs相关服务# service rpcbind restart
# service nfs start
8：将服务设为开机自启# chkconfig rpcbind on
# chkconfig nfs on
下边是把kvm模板导入二级存储3.二级存储3.1使用二级存储1）创建挂载点# mkdir /secondary2）挂载二级存储# mount -t nfs 192.168.1.131:/secondary /secondary/3.2导入kvm模板1）上传kvm模板并改名这个模板是下载下来用的，要不然也得很长时间
http://download.cloud.com/templates/acton/acton-systemvm-02062012.qcow2.bz2
# pwd/root# lsacton-systemvm-02062012.qcow2.bz2anaconda-ks.cfginstall.loginstall.log.syslog# mv acton-systemvm-02062012.qcow2.bz2 kvm.bz22）导入系统kvm模板# /usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt -m /secondary/ -f /root/kvm.bz2 -h kvm -FUncompressing to /usr/share/cloudstack-common/scripts/storage/secondary/df08b26b-08a0-401f-809d-0b38908bc630.qcow2.tmp (type bz2)...could take a long timeMoving to /secondary/template/tmpl/1/3///df08b26b-08a0-401f-809d-0b38908bc630.qcow2...could take a whileSuccessfully installed system VM template /root/kvm.bz2 to /secondary/template/tmpl/1/3/3）管理节点卸载二级存储并启动cloudstack服务# umount /secondary/;rm -rf /secondary/4）启动cloudstack服务# cloudstack-setup-management Starting to configure CloudStack Management Server:Configure Firewall ... Configure CloudStack Management Server ...CloudStack Management Server setup is Done!
页:
[1]