openstack安装配置—— 基础环境准备
众所周知，不管是公有云也好，私有云也罢，openstack都是赫赫有名的，那么今天就给大家分享一下oenstack官方目前较新版本mitaka的安装和配置，本次将会带大家配置openstack的Identity service、Compute service、Image service、Networking service、Block Storage service、Dashboard、Orchestration service、Shared File Systems service一些常用服务模块，以下是本实验的一些前期准备。网络环境准备
公有网络：10.0.0.0/16
私有网络：172.16.0.0/16
管理网络：192.168.10.0/24
直连接口：111.40.215.0/28
由于我使用的是远程机房中的高配服务器虚拟化出来的三台kvm虚拟机做的本实验，所以我这里使用10段地址模拟公网网络，并且新增了一个直连接口给三台虚拟机各自配置了一个公网IP， 以方便直连三台虚拟机执行配置操作，希望大家能够本实验中的网络环境，以免影响你对openstack网络的理解，在此特此说明。
controller节点：
公网IP：10.0.0.10 管理IP：192.168.10.10 直连IP：111.40.215.8
compute节点：
公网IP：10.0.0.20 管理IP：192.168.10.20 直连IP：111.40.215.9
compute节点：
公网IP：10.0.0.31 管理IP：192.168.10.31 直连IP：111.40.215.10
由于是用kvm虚拟化出来的虚机做的实验，所以需要提前开启compute节点的嵌套虚拟化配置，否则无法在虚拟出来的compute节点上再次使用kvm创建虚机
kvm虚拟机开启嵌套虚拟化过程
# modinfo kvm_intel | grep nested//查看kvm宿主机能否支持嵌套虚拟化
parm: nested:bool
# cat /sys/module/kvm_intel/parameters/nested//查看kvm宿主机是否开启嵌套虚拟化（Y是开启）
N
#//上述情况属于宿主机本身支持嵌套虚拟化，但没有开启，只需要系统级别开启即可
# modprobe -r kvm_intel//卸载kvm模块
# echo $?
0
# lsmod | grep kvm_intel
# modprobe kvm_intel nested=1//重载kvm模块，并开启kvm嵌套虚拟化功能
# lsmod | grep kvm_intel
kvm_intel 1621530
kvm 5252591 kvm_intel
# cat /sys/module/kvm_intel/parameters/nested//检验kvm嵌套虚拟化是否开启成功
Y
#
修改vm虚拟机的配置文件，cpu标签中添加类似如下的内容
<cpu mode='custom' match='exact'>
<model fallback='allow'>Westmere</model>
<vendor>Intel</vendor>
<feature policy='require' name='lahf_lm'/>
<feature policy='require' name='xtpr'/>
<feature policy='require' name='cx16'/>
<feature policy='require' name='tm2'/>
<feature policy='require' name='est'/>
<feature policy='require' name='vmx'/>
<feature policy='require' name='pbe'/>
<feature policy='require' name='tm'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='ss'/>
<feature policy='require' name='acpi'/>
<feature policy='require' name='ds'/>
</cpu>
kvm宿主机网络配置
br1使用eth0接口openstack管理网络：192.168.10.0/24
br2使用eth1接口openstack外部网络：10.0.0.0/16
br3使用eth3接口openstack直辖接口：111.40.215.0/28
# cat ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
BRIDGE=br1
# cat ifcfg-br1
TYPE=Bridge
BOOTPROTO=none
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=br1
DEVICE=br1
ONBOOT=yes
IPADDR=192.168.10.11
PREFIX=24
# cat ifcfg-eth1
DEVICE=eth1
ONBOOT=yes
BRIDGE=br2
# cat ifcfg-br2
TYPE=Bridge
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=br2
DEVICE=br2
ONBOOT=yes
IPADDR=10.0.0.11
PREFIX=16
# cat ifcfg-eth2
DEVICE=eth2
ONBOOT=yes
BRIDGE=br3
# cat ifcfg-br3
TYPE=Bridge
BOOTPROTO=none
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=br3
DEVICE=br3
ONBOOT=yes
IPADDR=111.40.215.14
NETMASK=255.255.255.240
GATEWAY=111.40.215.1
# cat /etc/resolv.conf
nameserver 223.5.5.5
#
kvm虚机准备
# virsh list --all
Id Name State
----------------------------------------------------
- base shut off
# virt-clone -o base -n controller -f /kvm/images/controller.qcow2
Allocating 'controller.qcow2' | 400 GB00:00:02
Clone 'controller' created successfully.
# virt-clone -o base -n block1 -f /kvm/images/block1.qcow2
Allocating 'block1.qcow2' | 400 GB00:00:02
Clone 'block1' created successfully.
# virt-clone -o base -n compute1 -f /kvm/images/compute1.qcow2
Allocating 'compute1.qcow2' | 400 GB00:00:02
Clone 'compute1' created successfully.
# virt-clone -o base -n compute2 -f /kvm/images/compute2.qcow2
Allocating 'compute2.qcow2' | 400 GB00:00:03
Clone 'compute2' created successfully.
# virsh list --all
Id Name State
----------------------------------------------------
- base shut off
- block1 shut off
- compute1 shut off
- compute2 shut off
- controller shut off
#
配置使用阿里云yum源以便安装程序包加速# cat /etc/yum.repos.d/aliyun-base.repo name=CentOS-$releasever - Basefailovermethod=prioritybaseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/gpgcheck=1gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#released updates name=CentOS-$releasever - Updatesfailovermethod=prioritybaseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/gpgcheck=1gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that may be usefulname=CentOS-$releasever - Extrasfailovermethod=prioritybaseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/gpgcheck=1gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packagesname=CentOS-$releasever - Plusfailovermethod=prioritybaseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/gpgcheck=1enabled=0gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
#contrib - packages by Centos Usersname=CentOS-$releasever - Contribfailovermethod=prioritybaseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/gpgcheck=1enabled=0gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7#
epel及openstack仓库# cat /etc/yum.repos.d/aliyun-epel.repo name=Extra Packages for Enterprise Linux 7 - $basearchbaseurl=http://mirrors.aliyun.com/epel/7/$basearchfailovermethod=priorityenabled=1gpgcheck=0gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
name=Extra Packages for Enterprise Linux 7 - $basearch - Debugbaseurl=http://mirrors.aliyun.com/epel/7/$basearch/debugfailovermethod=priorityenabled=0gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7gpgcheck=0
name=Extra Packages for Enterprise Linux 7 - $basearch - Sourcebaseurl=http://mirrors.aliyun.com/epel/7/SRPMSfailovermethod=priorityenabled=0gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7gpgcheck=0
name=openstack-mitakabaseurl=https://mirrors.aliyun.com/centos/7/cloud/x86_64/openstack-mitaka/gpgcheck=0#
页:
[1]