在 CentOS 6.4(64位) 安装 docker.io
Docker.io 是轻量级的“容器引擎+映像仓库”，在LXC（linux轻量级容器）的基础上构建，可以运行任何应用程序。docker.io的核心层由以下几个部分组成:
1、可执行程序，“/usr/bin/docker”
2、docker.io网站上有一系列创建好的操作系统和应用程序映像
3、AUFS（另一个统一文件系统）来实现文件系统的快照，文件变化，控制只读或读写的需求。
4、LXC（Linux轻量级容器）
5、Cgroups（各种资源和命名空间的管理）
在本文写作的时候，最新版本是0.5.3，但目前开发很活跃，一些功能和特性可能在新版本中会发生变化。
按下面的步骤安装docker.io：
0、安装CentOS6.x
1、因为selinux和LXC有冲突，所以需要禁用
# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
2、配置Fedora EPEL 源
sudo yum install http://ftp.riken.jp/Linux/Fedora/epel/6/i386/epel-release-6-8.noarch.rpm
3、配置hop5.in源
cd /etc/yum.repos.d
sudo wget http://www.hop5.in/yum/el6/hop5.repo
4、centos下安装docker-io
# yum install docker-io
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: centos.excellmedia.net
* epel: kartolo.sby.datautama.net.id
* extras: centos.excellmedia.net
* updates: centos.excellmedia.net
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package docker-io.x86_64 0:0.5.3-4.el6 will be installed
--> Processing Dependency: lxc >= 0.8.0 for package: docker-io-0.5.3-4.el6.x86_64
--> Processing Dependency: kernel-ml-aufs >= 3.10.5 for package: docker-io-0.5.3-4.el6.x86_64
--> Running transaction check
---> Package kernel-ml-aufs.x86_64 0:3.10.5-3.el6 will be installed
---> Package lxc.x86_64 0:0.8.0-3.el6 will be installed
--> Processing Dependency: liblxc.so.0()(64bit) for package: lxc-0.8.0-3.el6.x86_64
--> Running transaction check
---> Package lxc-libs.x86_64 0:0.8.0-3.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
============================================================================================
Package Arch Version Repository Size
============================================================================================
Installing:
docker-io x86_64 0.5.3-4.el6 hop5 1.2 M
Installing for dependencies:
kernel-ml-aufs x86_64 3.10.5-3.el6 hop5 33 M
lxc x86_64 0.8.0-3.el6 hop5 81 k
lxc-libs x86_64 0.8.0-3.el6 hop5 75 k
Transaction Summary
============================================================================================
Install 4 Package(s)
Total download size: 34 M
Installed size: 159 M
Is this ok : y
Downloading Packages:
(1/4): docker-io-0.5.3-4.el6.x86_64.rpm | 1.2 MB 00:03
(2/4): kernel-ml-aufs-3.10.5-3.el6.x86_64.rpm |33 MB 00:33
(3/4): lxc-0.8.0-3.el6.x86_64.rpm |81 kB 00:00
(4/4): lxc-libs-0.8.0-3.el6.x86_64.rpm |75 kB 00:00
--------------------------------------------------------------------------------------------
Total 896 kB/s |34 MB 00:39
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : lxc-libs-0.8.0-3.el6.x86_64 1/4
Installing : lxc-0.8.0-3.el6.x86_64 2/4
Installing : kernel-ml-aufs-3.10.5-3.el6.x86_64 3/4
Installing : docker-io-0.5.3-4.el6.x86_64 4/4
Verifying: kernel-ml-aufs-3.10.5-3.el6.x86_64 1/4
Verifying: lxc-0.8.0-3.el6.x86_64 2/4
Verifying: lxc-libs-0.8.0-3.el6.x86_64 3/4
Verifying: docker-io-0.5.3-4.el6.x86_64 4/4
Installed:
docker-io.x86_64 0:0.5.3-4.el6
Dependency Installed:
kernel-ml-aufs.x86_64 0:3.10.5-3.el6 lxc.x86_64 0:0.8.0-3.el6
lxc-libs.x86_64 0:0.8.0-3.el6
Complete!
#
5、检查安装情况
# docker -h
Usage of docker:
-D=false: Debug mode
-H=: tcp://host:port to bind/connect to or unix://path/to/socket to use
-api-enable-cors=false: Enable CORS requests in the remote api.
-b="": Attach containers to a pre-existing network bridge. Use 'none' to disable container networking
-d=false: Daemon mode
-dns="": Set custom dns servers
-g="/var/lib/docker": Path to graph storage base dir.
-p="/var/run/docker.pid": File containing process PID
-r=false: Restart previously running containers
6、要想docker正常运行还需要在/etc/fstab里增加cgroup文件系统
echo "none /sys/fs/cgroupcgroupdefaults 0 0" >> /etc/fstab
mount /sys/fs/cgroup
只有重新启动才能挂载/sys/fs/cgroup（因为当前运行的内核不支持cgroup），所以上面挂载的命令也可以不执行，但系统需要重新启动。
相关阅读:
Docker的搭建Gitlab CI指南
CentOS 6.5下使用docker 容器
基于Web的Docker 管理工具 Shipyard
页:
[1]