meikkiie 发表于 2017-12-24 08:32:42

apache使用总结

#  
# This is the main Apache HTTP server configuration file.It contains the
  
# configuration directives that give the server its instructions.
  
# See
<URL:http://httpd.apache.org/docs/2.4/> for detailed information.  
# In particular, see
  
#
<URL:http://httpd.apache.org/docs/2.4/mod/directives.html>  
# for a discussion of each configuration directive.
  
#
  
# Do NOT simply read the instructions in here without understanding
  
# what they do.They're here only as hints or reminders.If you are unsure
  
# consult the online docs. You have been warned.
  
#
  
# Configuration and logfile names: If the filenames you specify for many
  
# of the server's control files begin with "/" (or "drive:/" for Win32), the
  
# server will use that explicit path.If the filenames do *not* begin
  
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
  
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
  
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
  
# will be interpreted as '/logs/access_log'.
  

  
#
  
# ServerRoot: The top of the directory tree under which the server's
  
# configuration, error, and log files are kept.
  
#
  
# Do not add a slash at the end of the directory path.If you point
  
# ServerRoot at a non-local disk, be sure to specify a local disk on the
  
# Mutex directive, if file-based mutexes are used.If you wish to share the
  
# same ServerRoot for multiple httpd daemons, you will need to change at
  
# least PidFile.
  
#
  
ServerRoot "/webAgent/apache3"
  

  
#
  
# Mutex: Allows you to set the mutex mechanism and mutex file directory
  
# for individual mutexes, or change the global defaults
  
#
  
# Uncomment and change the directory if mutexes are file-based and the default
  
# mutex file directory is not on a local disk or is not appropriate for some
  
# other reason.
  
#
  
# Mutex default:logs
  

  
#
  
# Listen: Allows you to bind Apache to specific IP addresses and/or
  
# ports, instead of the default. See also the
<VirtualHost>  
# directive.
  
#
  
# Change this to Listen on specific IP addresses as shown below to
  
# prevent Apache from glomming onto all bound IP addresses.
  
#
  
#Listen 12.34.56.78:80
  
Listen 9000
  
ServerName www.example.com:9000
  

  
#
  
# Dynamic Shared Object (DSO) Support
  
#
  
# To be able to use the functionality of a module which was built as a DSO you
  
# have to place corresponding `LoadModule' lines at this location so the
  
# directives contained in it are actually available _before_ they are used.
  
# Statically compiled modules (those listed by `httpd -l') do not need
  
# to be loaded here.
  
#
  
# Example:
  
# LoadModule foo_module modules/mod_foo.so
  
#
  
LoadModule authn_file_module modules/mod_authn_file.so
  
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
  
#LoadModule authn_anon_module modules/mod_authn_anon.so
  
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
  
#LoadModule authn_socache_module modules/mod_authn_socache.so
  
LoadModule authn_core_module modules/mod_authn_core.so
  
LoadModule authz_host_module modules/mod_authz_host.so
  
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
  
LoadModule authz_user_module modules/mod_authz_user.so
  
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
  
#LoadModule authz_owner_module modules/mod_authz_owner.so
  
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
  
LoadModule authz_core_module modules/mod_authz_core.so
  
LoadModule access_compat_module modules/mod_access_compat.so
  
LoadModule auth_basic_module modules/mod_auth_basic.so
  
#LoadModule auth_form_module modules/mod_auth_form.so
  
#LoadModule auth_digest_module modules/mod_auth_digest.so
  
#LoadModule allowmethods_module modules/mod_allowmethods.so
  
#LoadModule file_cache_module modules/mod_file_cache.so
  
#LoadModule cache_module modules/mod_cache.so
  
#LoadModule cache_disk_module modules/mod_cache_disk.so
  
#LoadModule cache_socache_module modules/mod_cache_socache.so
  
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
  
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
  
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
  
#LoadModule watchdog_module modules/mod_watchdog.so
  
#LoadModule macro_module modules/mod_macro.so
  
#LoadModule dbd_module modules/mod_dbd.so
  
#LoadModule dumpio_module modules/mod_dumpio.so
  
#LoadModule buffer_module modules/mod_buffer.so
  
#LoadModule ratelimit_module modules/mod_ratelimit.so
  
LoadModule reqtimeout_module modules/mod_reqtimeout.so
  
#LoadModule ext_filter_module modules/mod_ext_filter.so
  
#LoadModule request_module modules/mod_request.so
  
#LoadModule include_module modules/mod_include.so
  
LoadModule filter_module modules/mod_filter.so
  
#LoadModule substitute_module modules/mod_substitute.so
  
#LoadModule sed_module modules/mod_sed.so
  
LoadModule mime_module modules/mod_mime.so
  
LoadModule log_config_module modules/mod_log_config.so
  
#LoadModule log_debug_module modules/mod_log_debug.so
  
#LoadModule logio_module modules/mod_logio.so
  
LoadModule env_module modules/mod_env.so
  
#LoadModule expires_module modules/mod_expires.so
  
LoadModule headers_module modules/mod_headers.so
  
#LoadModule unique_id_module modules/mod_unique_id.so
  
LoadModule setenvif_module modules/mod_setenvif.so
  
LoadModule version_module modules/mod_version.so
  
#LoadModule remoteip_module modules/mod_remoteip.so
  
LoadModule proxy_module modules/mod_proxy.so
  
LoadModule proxy_connect_module modules/mod_proxy_connect.so
  
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
  
LoadModule proxy_http_module modules/mod_proxy_http.so
  
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
  
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
  
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
  
#LoadModule proxy_express_module modules/mod_proxy_express.so
  
#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
  
#LoadModule session_module modules/mod_session.so
  
#LoadModule session_cookie_module modules/mod_session_cookie.so
  
#LoadModule session_dbd_module modules/mod_session_dbd.so
  
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
  
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
  
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
  
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
  
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
  
LoadModule unixd_module modules/mod_unixd.so
  
#LoadModule dav_module modules/mod_dav.so
  
LoadModule status_module modules/mod_status.so
  
LoadModule autoindex_module modules/mod_autoindex.so
  
#LoadModule info_module modules/mod_info.so
  
#LoadModule cgid_module modules/mod_cgid.so
  
#LoadModule dav_fs_module modules/mod_dav_fs.so
  
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
#LoadModule negotiation_module modules/mod_negotiation.so
  
LoadModule dir_module modules/mod_dir.so
  
#LoadModule actions_module modules/mod_actions.so
  
#LoadModule speling_module modules/mod_speling.so
  
#LoadModule userdir_module modules/mod_userdir.so
  
LoadModule alias_module modules/mod_alias.so
  
#LoadModule rewrite_module modules/mod_rewrite.so
  

  

<IfModule unixd_module>  
#
  
# If you wish httpd to run as a different user or group, you must run
  
# httpd as root initially and it will switch.
  
#
  
# User/Group: The name (or #number) of the user/group to run httpd as.
  
# It is usually good practice to create a dedicated user and group for
  
# running httpd, as with most system services.
  
#
  
User daemon
  
Group daemon
  

  

</IfModule>  

  
# 'Main' server configuration
  
#
  
# The directives in this section set up the values used by the 'main'
  
# server, which responds to any requests that aren't handled by a
  
#
<VirtualHost> definition.These values also provide defaults for  
# any
<VirtualHost> containers you may define later in the file.  
#
  
# All of these directives may appear inside
<VirtualHost> containers,  
# in which case these default settings will be overridden for the
  
# virtual host being defined.
  
#
  

  
#
  
# ServerAdmin: Your address, where problems with the server should be
  
# e-mailed.This address appears on some server-generated pages, such
  
# as error documents.e.g. admin@your-domain.com
  
#
  
ServerAdmin you@example.com
  

  
#

  
# ServerName gives the name and port that the server uses to>  
# This can often be determined automatically, but we recommend you specify
  
# it explicitly to prevent problems during startup.
  
#
  
# If your host doesn't have a registered DNS name, enter its IP address here.
  
#
  
#ServerName www.example.com:80
  

  
#
  
# Deny access to the entirety of your server's filesystem. You must
  
# explicitly permit access to web content directories in other
  
#
<Directory> blocks below.  
#
  

<Directory />  Options Indexes FollowSymLinks
  AllowOverride None
  Order allow,deny
  Allow from all
  

</Directory>  

  
#
  
# Note that from this point forward you must specifically allow
  
# particular features to be enabled - so if something's not working as
  
# you might expect, make sure that you have specifically enabled it
  
# below.
  
#
  

  
#
  
# DocumentRoot: The directory out of which you will serve your
  
# documents. By default, all requests are taken from this directory, but
  
# symbolic links and aliases may be used to point to other locations.
  
#
  
DocumentRoot "/webAgent/apache3/htdocs"
  

<Directory "/webAgent/apache3/htdocs">  #
  # Possible values for the Options directive are "None", "All",
  # or any combination of:
  #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named *explicitly* --- "Options All"
  # doesn't give it to you.
  #
  # The Options directive is both complicated and important.Please see
  # http://httpd.apache.org/docs/2.4/mod/core.html#options
  # for more information.
  #
  Options Indexes FollowSymLinks
  

  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be "All", "None", or any combination of the keywords:
  #   AllowOverride FileInfo AuthConfig Limit
  #
  AllowOverride None
  

  #
  # Controls who can get stuff from this server.
  #
  Require all granted
  

</Directory>  

  
#
  
# DirectoryIndex: sets the file that Apache will serve if a directory
  
# is requested.
  
#
  

<IfModule dir_module>  DirectoryIndex index.html
  

</IfModule>  

  
#
  
# The following lines prevent .htaccess and .htpasswd files from being
  
# viewed by Web clients.
  
#
  

<Files ".ht*">  Require all denied
  

</Files>  

  
#
  
# ErrorLog: The location of the error log file.
  
# If you do not specify an ErrorLog directive within a
<VirtualHost>
  
# container, error messages>  
# logged here.If you *do* define an error logfile for a
<VirtualHost>  
# container, that host's errors will be logged there and not here.
  
#
  
ErrorLog "logs/error_log"
  

  
#
  
# LogLevel: Control the number of messages logged to the error_log.
  
# Possible values include: debug, info, notice, warn, error, crit,
  
# alert, emerg.
  
#
  
LogLevel warn
  

  

<IfModule log_config_module>  #
  # The following directives define some format nicknames for use with
  # a CustomLog directive (see below).
  #
  LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  LogFormat "%h %l %u %t \"%r\" %>s %b" common
  

<IfModule logio_module>  # You need to enable mod_logio.c to use %I and %O
  LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>  

  #
  # The location and format of the access logfile (Common Logfile Format).
  # If you do not define any access logfiles within a
<VirtualHost>  # container, they will be logged here.Contrariwise, if you *do*
  # define per-
<VirtualHost> access logfiles, transactions will be  # logged therein and *not* in this file.
  #
  CustomLog "logs/access_log" common
  

  #
  # If you prefer a logfile with access, agent, and referer information
  # (Combined Logfile Format) you can use the following directive.
  #
  #CustomLog "logs/access_log" combined
  

</IfModule>  

  
<IfModule alias_module>
  #
  # Redirect: Allows you to tell clients about documents that used to
  # exist in your server's namespace, but do not anymore. The client
  # will make a new request for the document at its new location.
  # Example:
  # Redirect permanent /foo http://www.example.com/bar
  

  #
  # Alias: Maps web paths into filesystem paths and is used to
  # access content that does not live under the DocumentRoot.
  # Example:
  # Alias /webpath /full/filesystem/path
  #
  # If you include a trailing / on /webpath then the server will
  # require it to be present in the URL.You will also likely
  # need to provide a <Directory> section to allow access to
  # the filesystem path.
  

  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as Aliases, except that
  # documents in the target directory are treated as applications and
  # run by the server when requested rather than as documents sent to the
  # client.The same rules about trailing "/" apply to ScriptAlias
  # directives as to Alias.
  #
  ScriptAlias /cgi-bin/ "/webAgent/apache3/cgi-bin/"
  

  
</IfModule>
  

  
<IfModule cgid_module>
  #
  # ScriptSock: On threaded servers, designate the path to the UNIX
  # socket used to communicate with the CGI daemon of mod_cgid.
  #
  #Scriptsock cgisock
  
</IfModule>
  

  
#
  
# "/webAgent/apache3/cgi-bin" should be changed to whatever your ScriptAliased
  
# CGI directory exists, if you have that configured.
  
#
  
<Directory "/webAgent/apache3/cgi-bin">
  AllowOverride None
  Options None
  Require all granted
  
</Directory>
  

  
<IfModule mime_module>
  #
  # TypesConfig points to the file containing the list of mappings from
  # filename extension to MIME-type.
  #
  TypesConfig conf/mime.types
  

  #
  # AddType allows you to add to or override the MIME configuration
  # file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress .Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented-out, then you
  # probably should define those extensions to indicate media types:
  #
  AddType application/x-compress .Z
  AddType application/x-gzip .gz .tgz
  

  #
  # AddHandler allows you to map certain file extensions to "handlers":
  # actions unrelated to filetype. These can be either built into the server
  # or added with the Action directive (see below)
  #
  # To use CGI scripts outside of ScriptAliased directories:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  

  # For type maps (negotiated resources):
  #AddHandler type-map var
  

  #
  # Filters allow you to process content before it is sent to the client.
  #
  # To parse .shtml files for server-side includes (SSI):
  # (You will also need to add "Includes" to the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  
</IfModule>
  

  
#
  
# The mod_mime_magic module allows the server to use various hints from the
  
# contents of the file itself to determine its type.The MIMEMagicFile
  
# directive tells the module where the hint definitions are located.
  
#
  
#MIMEMagicFile conf/magic
  

  
#
  
# Customizable error responses come in three flavors:
  
# 1) plain text 2) local redirects 3) external redirects
  
#
  
# Some examples:
  
#ErrorDocument 500 "The server made a boo boo."
  
#ErrorDocument 404 /missing.html
  
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  
#ErrorDocument 402 http://www.example.com/subscription_info.html
  
#
  

  
#
  
# MaxRanges: Maximum number of Ranges in a request before
  
# returning the entire resource, or one of the special
  
# values 'default', 'none' or 'unlimited'.
  
# Default setting is to accept 200 Ranges.
  
#MaxRanges unlimited
  

  
#
  
# EnableMMAP and EnableSendfile: On systems that support it,
  
# memory-mapping or the sendfile syscall may be used to deliver
  
# files.This usually improves server performance, but must
  
# be turned off when serving from networked-mounted
  
# filesystems or if support for these functions is otherwise
  
# broken on your system.
  
# Defaults: EnableMMAP On, EnableSendfile Off
  
#
  
#EnableMMAP off
  
#EnableSendfile on
  

  
# Supplemental configuration
  
#
  
# The configuration files in the conf/extra/ directory can be
  
# included to add extra features or to modify the default configuration of
  
# the server, or you may simply copy their contents here and change as
  
# necessary.
  

  
# Server-pool management (MPM specific)
  
#Include conf/extra/httpd-mpm.conf
  

  
# Multi-language error messages
  
#Include conf/extra/httpd-multilang-errordoc.conf
  

  
# Fancy directory listings
  
#Include conf/extra/httpd-autoindex.conf
  

  
# Language settings
  
#Include conf/extra/httpd-languages.conf
  

  
# User home directories
  
#Include conf/extra/httpd-userdir.conf
  

  
# Real-time info on requests and configuration
  
#Include conf/extra/httpd-info.conf
  

  
# Virtual hosts
  
#Include conf/extra/httpd-vhosts.conf
  

  
# Local access to the Apache HTTP Server Manual
  
#Include conf/extra/httpd-manual.conf
  

  
# Distributed authoring and versioning (WebDAV)
  
#Include conf/extra/httpd-dav.conf
  

  
# Various default settings
  
#Include conf/extra/httpd-default.conf
  

  
# Configure mod_proxy_html to understand HTML4/XHTML1
  
<IfModule proxy_html_module>
  
Include conf/extra/proxy-html.conf
  
</IfModule>
  

  
# Secure (SSL/TLS) connections
  
#Include conf/extra/httpd-ssl.conf
  
#
  
# Note: The following must must be present to support
  
#       starting without SSL on platforms with no /dev/random equivalent
  
#       but a statically compiled-in mod_ssl.
  
#
  
<IfModule ssl_module>
  
SSLRandomSeed startup builtin
  
SSLRandomSeed connect builtin
  
</IfModule>
  

  
<IfModule headers_module>
  Header set X-Frame-Options: DENY
  #Header always append X-Frame-Options DENY
  
</IfModule>
  

  
<VirtualHost *:9000>
  ServerAdmin test@test.com
  ServerName www.test.com
  ProxyRequests Off
  <Proxy *>
  Order deny,allow
  Allow from all
  </Proxy>
  #ProxyPass / http://172.20.15.73:8080/
  #ProxyPassReverse / http://172.20.15.73:8080/
  ProxyPass /springMVC http://172.20.15.181:8080/springMVC
  ProxyPassReverse /springMVC http://172.20.15.181:8080/springMVC
  
</VirtualHost>
  

  
#Header always append X-Frame-Options DENY
页: [1]
查看完整版本: apache使用总结