奥飞火千万电 发表于 2018-1-5 16:39:46

配置安全证书的Etcd集群

　　不知在哪篇技术文档中看到，kubernetes master和etcd分开部署模式，因为集群的状态都保存在etcd中，这样当kubernetes master挂掉后，通过API Server交互的Scale等功能无法使用外，其他已经部署的Pod仍然能继续工作。
　　基于这种考虑，通过yum以及修改etcd.conf方式部署了一个三节点的etcd集群，但对于企业使用而言，虽然在局域网内访问，多数情况下还是需要配置安全证书，就好像很多政府部门因为三级等保的要求必须在weblogic中配置ssl一样，自己尝试在之前的环境中通过修改conf文件下配置，启动时遭遇各种问题失败，但同样的证书后修改为命令行方式配置后以及手工安装etcd后部署成功。记录如下:


[*]安装cfssl
　　

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64　　
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
　　
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64
　　
mv cfssl_linux-amd64 /usr/local/bin/cfssl
　　
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
　　



[*]创建CA
　　

# mkdir /root/ssl　　
# cd
/root/ssl　　
# cfssl print
-defaults config > ca-config.json　　
# cfssl print
-defaults csr > ca-csr.json　　

　　修改ca-config.json
　　

# cat ca-config.json　　
{
"signing": {"default": {"expiry": "8760h"　　},
"profiles": {"kubernetes": {"expiry": "8760h","usages": ["signing","key encipherment","server auth","client auth"　　]
　　}
　　}
　　}
　　
}
　　

　　server auth表示client可以用该ca对server提供的证书进行验证
　　client auth表示server可以用该ca对client提供的证书进行验证
　　创建证书签名请求
　　

# cat ca-csr.json　　
{
"CN": "kubernetes","key": {"algo": "rsa","size": 2048　　},
"names": [　　{
"C": "US","L": "CA","ST": "San Francisco","O": "k8s","OU": "System"　　}
　　]
　　
}
　　

　　生成CA证书和私钥
　　

# cfssl gencert -initca ca-csr.json | cfssljson -bare ca　　
# ls ca
*　　
ca
-config.json ca.csr ca-csr.json ca-key.pem ca.pem　　



[*]创建kubernetes证书
　　

# cat kubernetes-csr.json　　
{
"CN": "kubernetes","hosts": ["127.0.0.1","192.168.0.102","192.168.0.103","192.168.0.104","192.168.0.105","192.168.0.106","10.254.0.1","kubernetes","kubernetes.default","kubernetes.default.svc","kubernetes.default.svc.cluster","kubernetes.default.svc.cluster.local"　　],
"key": {"algo": "rsa","size": 2048　　},
"names": [　　{
"C": "CN","ST": "BeiJing","L": "BeiJing","O": "k8s","OU": "System"　　}
　　]
　　
}
　　

　　可以看到该证书把etcd集群的所有ip,kubernetes master的所有ip以及kubernetes服务的ip(10.254.0.1)都加入进去了，这样他们都能使用同一个密钥
　　生成Kubernetes证书和密钥
　　

# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes　　
# ls kuberntes
*　　
kubernetes.csr kubernetes
-csr.json kubernetes-key.pem kubernetes.pem　　



[*]分发证书文件
　　在每台etcd机器中运行
　　

# mkdir -p /etc/kubernetes/ssl　　
# cp
*.pem /etc/kubernetes/ssl　　

　　etcd集群配置
　　在/etc/hosts文件中加入地址
　　

# cat /etc/hosts　　

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4　　
::
1         localhost localhost.localdomain localhost6 localhost6.localdomain6　　

192.168.0.102   etc0　　

192.168.0.103   etc1　　

192.168.0.104   etc2　　



[*]手工下载和安装etcd
　　访问https://github.com/coreos/etcd/releases，我下载的是3.2.9版本
　　https://github.com/coreos/etcd/releases/download/v3.2.9/etcd-v3.2.9-linux-amd64.tar.gz
　　在每台机器上运行
　　

tar -xvf etcd-v3.2.9-linux-amd64.tar.gz　　
mv etcd
-v3.2.9-linux-amd64/etcd* /root/local/bin　　

　　
mkdir
-p /var/lib/etcd　　

　　建立一个etcd.service文件，内容如下（针对不同的etcd节点需要修改ip地址和name)
　　

# cat /etc/systemd/system/etcd.service　　

　　
Description
=Etcd Server　　
After
=network.target　　
After
=network-online.target　　
Wants
=network-online.target　　
Documentation
=https://github.com/coreos　　

　　

　　
Type=notify
　　
WorkingDirectory=/var/lib/etcd/
　　
EnvironmentFile=-/etc/etcd/etcd.conf
　　
ExecStart=/bin/bash -c "GOMAXPROCS=$(nproc) /root/local/bin/etcd --name=etc0 --cert-file=/etc/kubernetes/ssl/kubernetes.pem --key-file=/etc/kubernetes/ssl/kubernetes-key.pem --peer-cert-file=/etc/kubernetes/ssl/kubernetes.pem --peer-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --trusted-ca-file=/etc/kubernetes/ssl/ca.pem --peer-trusted-ca-file=/etc/kubernetes/ssl/ca.pem --initial-advertise-peer-urls=https://192.168.0.102:2380 --listen-peer-urls=https://192.168.0.102:2380 --listen-client-urls=https://192.168.0.102:2379,https://127.0.0.1:2379 --advertise-client-urls=https://192.168.0.102:2379 --initial-cluster-token=etcd-cluster-0 --initial-cluster=\"etc0=https://192.168.0.102:2380,etc1=https://192.168.0.103:2380,etc2=https://192.168.0.104:2380\" --initial-cluster-state=new --data-dir=/var/lib/etcd"
　　
Restart=on-failure
　　
RestartSec=5
　　
LimitNOFILE=65536
　　

　　

　　
WantedBy=multi-user.target
　　

　　在每台etcd节点上启动etcd服务
　　

# mv etcd.service /etc/systemd/system/　　
# systemctl daemon
-reload　　
# systemctl enable etcd
　　
# systemctl start etcd
　　
# systemctl status etcd
　　

　　

# systemctl status etcd　　
● etcd.service
- Etcd Server　　Loaded: loaded (
/etc/systemd/system/etcd.service; disabled; vendor preset: disabled)　　Active: active (running) since Thu
2017-10-19 18:21:28 CST; 1h 20min ago　　Docs: https:
//github.com/coreos　　Main PID: 9178 (etcd)
　　CGroup: /system.slice/etcd.service
　　└─9178 /root/local/bin/etcd --name=etc1 --cert-file=/etc/kubernetes/ssl/kubernetes.pem --key-file=/etc/kubernetes/ssl/kubernetes-key.pem...
　　

　　
Oct 19 18:22:19 etc1 etcd: lost the TCP streaming connection with peer 70df68d0b37fcd43 (stream MsgApp v2 reader)
　　
Oct 19 18:22:20 etc1 etcd: failed to dial 70df68d0b37fcd43 on stream Message (dial tcp 192.168.0.104:2380: getsockopt: connection refused)
　　
Oct 19 18:22:20 etc1 etcd: peer 70df68d0b37fcd43 became inactive
　　
Oct 19 18:22:21 etc1 etcd: peer 70df68d0b37fcd43 became active
　　
Oct 19 18:22:21 etc1 etcd: closed an existing TCP streaming connection with peer 70df68d0b37fcd43 (stream MsgApp v2 writer)
　　
Oct 19 18:22:21 etc1 etcd: established a TCP streaming connection with peer 70df68d0b37fcd43 (stream MsgApp v2 writer)
　　
Oct 19 18:22:21 etc1 etcd: closed an existing TCP streaming connection with peer 70df68d0b37fcd43 (stream Message writer)
　　
Oct 19 18:22:21 etc1 etcd: established a TCP streaming connection with peer 70df68d0b37fcd43 (stream Message writer)
　　
Oct 19 18:22:21 etc1 etcd: established a TCP streaming connection with peer 70df68d0b37fcd43 (stream Message reader)
　　
Oct 19 18:22:21 etc1 etcd: established a TCP streaming connection with peer 70df68d0b37fcd43 (stream MsgApp v2 reader)
　　

　　如果出现任何错误，可以通过journalctl -xe去看到启动详情。


[*]验证服务
　　

# ./etcdctl --ca-file=/etc/kubernetes/ssl/ca.pem --cert-file=/etc/kubernetes/ssl/kubernetes.pem --key-file=/etc/kubernetes/ssl/kubernetes-key.pem --endpoints=https://192.168.0.102:2379,https://192.168.0.103:2379,https://192.168.0.104:2379 cluster-health　　
member 4701789a3a673ef5 is healthy: got healthy result from https://192.168.0.103:2379
　　
member 70df68d0b37fcd43 is healthy: got healthy result from https://192.168.0.104:2379
　　
member 90262c9df511cc4d is healthy: got healthy result from https://192.168.0.102:2379
　　
cluster is healthy
　　

　　如果不带证书访问，报错信息为
　　

# ./etcdctl--endpoints=https://192.168.0.102:2379,https://192.168.0.103:2379,https://192.168.0.104:2379 cluster-health　　
cluster may be unhealthy: failed to list members
　　
Error:client: etcd cluster is unavailable or misconfigured; error #0: x509: certificate signed by unknown authority
　　
; error #1: x509: certificate signed by unknown authority
　　
; error #2: x509: certificate signed by unknown authority
　　

　　
error #0: x509: certificate signed by unknown authority
　　
error #1: x509: certificate signed by unknown authority
　　
error #2: x509: certificate signed by unknown authority
　　



[*]目前的问题是：
　　为什么通过手工方式修改conf文件不成？

lisimba 发表于 2019-1-28 08:29:09

学习，感谢分享
页: [1]
查看完整版本: 配置安全证书的Etcd集群