Cisco CAR 实现方法和机制
Use the mask keyword to assign multiple IP precedence's to the same rate-limit list. To determine the mask value, perform the following steps:Step 1 Decide which precedence's you want to assign to this rate-limit access list.
Step 2 Convert the precedence's into an 8-bit numbers with each bit corresponding to one
precedence. For example, an IP precedence of 0 corresponds to 00000001, 1 corresponds
to 00000010, 6 corresponds to 01000000, and 7 corresponds to 10000000.
Step 3 Add the 8-bit numbers for the selected precedence's together. For example, the
mask for precedence's 1 and 6 is 01000010.
Step 4 Convert the binary mark into the corresponding hexadecimal number. For
example, 01000010 becomes 0x42. This value is used in the access-list rate-limit
command. Any packets that have an IP precedence of 1 or 6 will match this access list. A
mask of FF matches any precedence, and 00 does not match any precedence.
In this example, a mask of 07 translates to 00000111, so IP precedence 0, 1, and 2 will be
policed.
页:
[1]