jane27 发表于 2018-7-12 08:41:15

JNCIP案例分析 - Juniper/Cisco OSPF互操作 Part1

nigel@itaa7.2# run show route logical-router r6 protocol　　rip
　　inet.0: 24 destinations, 24 routes (24 active,
　　0 holddown, 0 hidden)
　　+ = Active Route, - = Last Active, * = Both
　　192.168.0.0/24   * 00:22:22, metric 2, tag 0
　　> to 172.16.40.1 via fxp1.60
　　192.168.1.0/24   * 00:22:22, metric 2, tag 0
　　> to 172.16.40.1 via fxp1.60
　　192.168.2.0/24   * 00:22:22, metric 2, tag 0
　　> to 172.16.40.1 via fxp1.60
　　192.168.3.0/24   * 00:22:22, metric 2, tag 0
　　> to 172.16.40.1 via fxp1.60
　　192.168.4.0/24   * 00:22:22, metric 2, tag 0
　　> to 172.16.40.1 via fxp1.60
　　224.0.0.9/32       * 00:22:32, metric 1
　　MultiRecv
　　r7# show ip route rip
　　R    192.168.4.0/24 via 172.16.40.5,0:34,Fa0/0.70
　　R    192.168.0.0/24 via 172.16.40.5,0:34,Fa0/0.70
　　R    192.168.1.0/24 via 172.16.40.5,0:34,Fa0/0.70
　　R    192.168.2.0/24 via 172.16.40.5,0:34,Fa0/0.70
　　R    192.168.3.0/24 via 172.16.40.5,0:34,Fa0/0.70
页: [1]
查看完整版本: JNCIP案例分析 - Juniper/Cisco OSPF互操作 Part1