Cisco spanning-tree故障处理 - %SPANTREE-7-BLOCK_PORT_TYPE:
I tried to configure this port as a trunk too here are the errors 000155: Mar 6 12:17:30 UTC: %SPANTREE-2-RECV_PVID_ERR: Received BPDU withinconsistent peer vlan> 000156: Mar 6 12:17:30 UTC: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking
GigabitEthernet2/2 on VLAN0001. Inconsistent local vlan.
000157: Mar 6 12:18:22 UTC: %SYS-5-CONFIG_I: Configured from console by
suseadmin on vty0
000158: Mar 6 12:18:24 UTC: %SPANTREE-2-RECV_BAD_TLV: Received SSTP BPDU
with bad TLV on GigabitEthernet2/2 VLAN1.
There is nt much on the netscreen side i can configure as far as vlans and
trunks. By default that interfasce is already on vlan1
页:
[1]