Cisco MDS
配置Cisco MDS光纤存储交换机 （MDS Multilayer Director Switch 多层光纤阵列交换机）大概流程：
1：创建VSAN，将端口加入VSAN
2：创建ZONE，将端口加入ZONE
3：创建zoneSet,将ZONE加入set，并启用zoneSet
4：启用所有端口
使用命令行基本配置
MDS-1(config)#switchname MDS-1
MDS-1(config)#ip default-gateway 66.66.3.254
MDS-1(config)#interface mgmt0
MDS-1(config-if)#ip address 66.66.3.252 255.255.255.0
MDS-1(config-if)#exit
MDS-1(config)#feature telnet
MDS-1(config)#username admin password 1a.yeslab role nework-admin
Open-E
fc1/2
ESXi-1fc1/1 MDS1 fc1/3 ESXi-2
VSAN配置部分
vsan database
vsan 100 name "yeslab"
vsan 100 interface fc1/1
vsan 100 interface fc1/2
vsan 100 interface fc1/3
zone name esxi1 vsan 100
member interface fc1/1
member interface fc1/2
zone name esxi2 vsan 100
member interface fc1/2
member interface fc1/3
zoneset name zoneset vsan 100
member esxi1
member esxi2
zoneset avtivate name zoneset vsan 100
interface fc1/1
no shutdown
interface fc1/2
no shutdown
interface fc1/3
no shutdown
页:
[1]