CISCO2950恢复出厂设置
2.初始化flash。>flash_init
3.更名含有password的配置文件。
>rename flash:config.text flash:config.old
4.重新启动交换机。
>boot/reset
5.进入特权模式。
>enable
6.此时开机是已忽略password。
#rename flash:config.old flash:config.text
7.copy配置文件到当前系统中。
#copy flash:config.text syst...
这是密码回复的步骤
页:
[1]