Cisco mds 9700 upgrade 升级
同理 见Cisco Nexus 7000 upgrade 简易升级http://ksitigarbha.blog.51cto.com/1013724/1894157
最后，官方文档说的比较详细，如果您是跨大版本升级，注意兼容性列表，有的可能需要先升级某些
bios版本和其他各种版本逗得匹配吧
switch# sh ver ###显示现在运行的版本为6.2.9
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.1.0
kickstart: version 6.2(9)
system: version 6.2(9)
BIOS compile time: 02/27/2013
kickstart image file is: bootflash:///m9700-sf3ek9-kickstart-mz.6.2.9.bin
kickstart compile time:6/3/2014 1:00:00
system image file is: bootflash:///m9700-sf3ek9-mz.6.2.9.bin
system compile time: 6/3/2014 1:00:00
Hardware
cisco MDS 9706 (6 Slot) Chassis ("Supervisor Module-3")
Intel(R) Xeon(R) CPU with 8120776 kB of memory.
Processor Board> Device name: switch
bootflash: 3915776 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 4 hour(s), 20 minute(s), 55 second(s)
Last reset at 670619 usecs afterWed Jan 18 15:18:26 2017
Reason: Reset triggered due to Switchover Request by User
System version: 6.2(9)
Service:
plugin
Core Plugin, Ethernet Plugin
switch# show module
ModPortsModule-Type Model Status
------------------------------------------- ------------------ ----------
1 48 2/4/8/10/16 Gbps Advanced FC Module DS-X9448-768K9 ok
2 48 2/4/8/10/16 Gbps Advanced FC Module DS-X9448-768K9 ok
3 0 Supervisor Module-3 DS-X97-SF1-K9 active *
4 0 Supervisor Module-3 powered-up
5 48 2/4/8/10/16 Gbps Advanced FC Module DS-X9448-768K9 ok
ModSw Hw
-----------------------
1 6.2(9) 1.5
2 6.2(9) 1.5
3 6.2(9) 1.4
5 6.2(9) 1.5
ModMAC-Address(es) Serial-Num
---------------------------------------------------
1 00-cc-fc-49-e2-00 to 00-cc-fc-49-e2-03JAE2007022D
2 00-cc-fc-49-57-7c to 00-cc-fc-49-57-7fJAE2006033W
3 00-cc-fc-eb-73-08 to 00-cc-fc-eb-73-1aJAE201001GT
5 00-cc-fc-49-4b-98 to 00-cc-fc-49-4b-9bJAE2006033H
ModOnline Diag Status
---------------------
1 Pass
2 Pass
3 Pass
5 Pass
Xbar PortsModule-Type Model Status
------------------------------------------- ------------------ ----------
1 0 Fabric Module 1 DS-X9706-FAB1 ok
3 0 Fabric Module 1 DS-X9706-FAB1 ok
5 0 Fabric Module 1 DS-X9706-FAB1 ok
Xbar Sw Hw
-----------------------
1 NA 1.0
3 NA 1.0
5 NA 1.0
Xbar MAC-Address(es) Serial-Num
---------------------------------------------------
1 NA JAE200901LW
3 NA JAE201101T3
5 NA JAE201101QZ
* this terminal session
switch# show boot ###显示启动文件
Current Boot Variables:
sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
No module boot variable set
switch# dir bootflash://sup-1/ ###显示当前引擎sup1下有哪些文件 ，以后得将文件上传至sup1和sup2上不能只上传到一个
bootflash://sup-1/lost+found
bootflash://sup-1/m9700-sf3ek9-kickstart-mz.6.2.17.bin
bootflash://sup-1/m9700-sf3ek9-kickstart-mz.6.2.9.bin
bootflash://sup-1/m9700-sf3ek9-mz.6.2.17.bin
bootflash://sup-1/m9700-sf3ek9-mz.6.2.9.bin
switch# dir bootflash://sup-1/
16384 Mar 23 18:48:20 2016lost+found/
37105664 Jan 18 08:58:03 2017m9700-sf3ek9-kickstart-mz.6.2.17.bin
36039168 Mar 23 18:48:58 2016m9700-sf3ek9-kickstart-mz.6.2.9.bin
196410336 Jan 18 08:58:33 2017m9700-sf3ek9-mz.6.2.17.bin
193505718 Mar 23 18:49:26 2016m9700-sf3ek9-mz.6.2.9.bin
Usage for bootflash://sup-1
687181824 bytes used
3053662208 bytes free
3740844032 bytes total
switch# dir bootflash://sup-2 ###显示standby引擎sup2下有哪些文件
16384 Mar 23 18:49:48 2016lost+found/
37105664 Jan 18 08:58:03 2017m9700-sf3ek9-kickstart-mz.6.2.17.bin
36039168 Mar 23 18:50:23 2016m9700-sf3ek9-kickstart-mz.6.2.9.bin
196410336 Jan 18 08:58:33 2017m9700-sf3ek9-mz.6.2.17.bin
193505718 Mar 23 18:50:50 2016m9700-sf3ek9-mz.6.2.9.bin
Usage for bootflash://sup-2
687177728 bytes used
3053666304 bytes free
3740844032 bytes total
switch# dir bootflash://sup-2/
16384 Mar 23 18:49:48 2016lost+found/
37105664 Jan 18 08:58:03 2017m9700-sf3ek9-kickstart-mz.6.2.17.bin
36039168 Mar 23 18:50:23 2016m9700-sf3ek9-kickstart-mz.6.2.9.bin
196410336 Jan 18 08:58:33 2017m9700-sf3ek9-mz.6.2.17.bin
193505718 Mar 23 18:50:50 2016m9700-sf3ek9-mz.6.2.9.bin
Usage for bootflash://sup-2
687177728 bytes used
3053666304 bytes free
3740844032 bytes total
switch# conf t
Enter configuration commands, one per line.End with CNTL/Z.
switch(config)# boot kickstart bootflash:m9700-sf3ek9-kickstart-mz.6.2.17.bin sup-1 sup-2 ###设置kickstart 启动文件
Performing image verification and compatibility check, please wait....
Note: system and kickstart bootvars are pointing to incompatible images
switch(config)# boot system bootflash:m9700-sf3ek9-mz.6.2.17.bin sup-1 sup-2 ###设置system 启动文件
Performing image verification and compatibility check, please wait....
switch(config)# install all kickstart bootflash:m9700-sf3ek9-kickstart-mz.6.2.17.bin ###安装kickstsrt启动文件 这里可以同时安装 system启动文件 但我分步来。
Installer will perform compatibility check first. Please wait.
Verifying image bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/m9700-sf3ek9-mz.6.2.9.bin for boot variable "system".
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "slc4xb" version from image bootflash:/m9700-sf3ek9-mz.6.2.9.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/m9700-sf3ek9-mz.6.2.9.bin.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/m9700-sf3ek9-mz.6.2.9.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Modulebootable ImpactInstall-typeReason
----------------------------------------------
1 yesnon-disruptive none
2 yesnon-disruptive none
3 no n/a n/aIncompatible image
4 no n/a n/aIncompatible image
5 yesnon-disruptive none
Not all components in the image are compatible.
ISSU can't continue
switch(config)# install all system bootflash:m9700-sf3ek9-mz.6.2.17.bin ?
*** No matching command found in current mode, matching in (exec) mode ***
<CR>
kickstartBoot-variable name
switch(config)# install all system bootflash:m9700-sf3ek9-mz.6.2.17.bin ###安装system启动文件
Installer will perform compatibility check first. Please wait.
Verifying image bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/m9700-sf3ek9-mz.6.2.17.bin for boot variable "system".
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "slc4xb" version from image bootflash:/m9700-sf3ek9-mz.6.2.17.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/m9700-sf3ek9-mz.6.2.17.bin.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/m9700-sf3ek9-mz.6.2.17.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Modulebootable ImpactInstall-typeReason
----------------------------------------------
1 yesnon-disruptive rolling
2 yesnon-disruptive rolling
3 no n/a n/aIncompatible image
4 no n/a n/aIncompatible image
5 yesnon-disruptive rolling
Not all components in the image are compatible.
ISSU can't continue
switch(config)# sh ver ###这是show ver 无改动
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.1.0
kickstart: version 6.2(9)
system: version 6.2(9)
BIOS compile time: 02/27/2013
kickstart image file is: bootflash:///m9700-sf3ek9-kickstart-mz.6.2.9.bin
kickstart compile time:6/3/2014 1:00:00
system image file is: bootflash:///m9700-sf3ek9-mz.6.2.9.bin
system compile time: 6/3/2014 1:00:00
Hardware
cisco MDS 9706 (6 Slot) Chassis ("Supervisor Module-3")
Intel(R) Xeon(R) CPU with 8120776 kB of memory.
Processor Board> Device name: switch
bootflash: 3915776 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 4 hour(s), 32 minute(s), 51 second(s)
Last reset at 670619 usecs afterWed Jan 18 15:18:26 2017
Reason: Reset triggered due to Switchover Request by User
System version: 6.2(9)
Service:
plugin
Core Plugin, Ethernet Plugin
switch(config)# sh boot ###show boot 发现net> Current Boot Variables:
sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.9.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.9.bin
No module boot variable set
switch(config)# copy running-config startup-config ###保存一下
[########################################] 100%
Copy complete.
switch(config)# sh boot ###
Current Boot Variables:
sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
No module boot variable set
switch#> This command will reboot the system. (y/n)? y
switch# show boot ###重启后show boot
Current Boot Variables:
sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
sup-2
kickstart variable = bootflash:/m9700-sf3ek9-kickstart-mz.6.2.17.bin
system variable = bootflash:/m9700-sf3ek9-mz.6.2.17.bin
No module boot variable set
switch# sh version ###重启后确认ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.1.0
kickstart: version 6.2(17)
system: version 6.2(17)
BIOS compile time: 02/27/2013
kickstart image file is: bootflash:///m9700-sf3ek9-kickstart-mz.6.2.17.bin
kickstart compile time:6/17/2016 23:00:00
system image file is: bootflash:///m9700-sf3ek9-mz.6.2.17.bin
system compile time: 6/17/2016 23:00:00
Hardware
cisco MDS 9706 (6 Slot) Chassis ("Supervisor Module-3")
Intel(R) Xeon(R) CPU with 8120776 kB of memory.
Processor Board> Device name: switch
bootflash: 3915776 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 0 hour(s), 6 minute(s), 46 second(s)
Last reset at 478930 usecs afterWed Jan 18 19:53:00 2017
Reason: Reset Requested by CLI command> System version: 6.2(9)
Service:
plugin
Core Plugin, Ethernet Plugin
页:
[1]