【资料整理】cisco [acl]
Access-List{
1) Standard access list:
range: (1 to 99)
check: IP
usage:
access-list access-list-number {permit|deny} source
Test conditions: Check all the address bits (match all)
An IP host address,
i.e.
192.168.20.33 0.0.0.0
//相当于：
host 192.168.20.33
0.0.0.0 -> check all bits
Test conditions: Ignore all the address bits (match any)
Any IP host address,
i.e.
0.0.0.0 255.255.255.255
//相当于：
any
255.255.255.255 -> ignore all bits
#1 Permit my network only#
access-list 1 permit 172.16.0.00.0.255.255
(implicit deny all - not visible in the list)
(access-list 1 deny 0.0.0.0 255.255.255.255)
#2 Deny a specific host#
access-list 1 deny 172.16.4.13 0.0.0.0
access-list 1 permit 0.0.0.0255.255.255.255
(implicit deny all)
(access-list 1 deny 0.0.0.0 255.255.255.255)
#3 Deny a specific subnet#
access-list 1 deny 172.16.4.00.0.0.255
access-list 1 permit any
(implicit deny all)
(access-list 1 deny 0.0.0.0 255.255.255.255)
#VTY: allow remote 172.16.10.3 to use VTY
A(config)#access-list 50 permit 172.16.10.3
A(config)#line vty 0 4
A(config-if)#access-class 50 in
2) Extend access list:
range: (100 to 199)
check:TCP src_addr dest_addr & protocol & port
usage:
access-list access-list-number{ permit | deny } protocol
source source-wildcard
destination destination-wildcard [ operator port ]
#4 Deny FTP fromsubnet 172.16.4.0 to subnet 172.16.3.0 out of E0#
access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 21
access-list 101 deny tcp 172.16.4.0 0.0.0.255 172.16.3.0 0.0.0.255 eq 20
access-list 101 permit ip any any
(implicit deny all)
(access-list 101 deny ip 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255)
#5 Deny only Telnet from subnet 172.16.4.0out of E0#
access-list 101 deny tcp 172.16.4.00.0.0.255any eq 23
access-list 101 permit ip any any
(implicit deny all)
3) Named ACL
A(config)#ip access-list standard BlockSales
A(config-std-nacl)#deny 172.16.40.0 0.0.0.255
A(config-std-nacl)#permit any
A(config)#int f0/0
A(config-if)#ip access-group BlockSales out
}
页:
[1]