Cisco Nexus 7000 upgrade 升级
运行前，得把cisco nexus 7010 升级到cisco推荐的稳定版本，以后打算一直用，没事尽量不升版本，cisco搜索nexus 7000 upgrade 有各种文档，很长的，介绍各种方法，原理，其中有如何升完一个引擎，再升另一个，这样不中断生产，但手上这个还没跑数据，简单粗暴，install all 一把升完。。。其实简单粗暴或者以后生产过程中升级貌似也没事，因为有双引擎，只要操作得当，总会适时一个备引擎升完，切到备上，才升级主，这个过程可以自动完成，也可以你手动，我喜欢一把来，自动搞定
以下是secureCRT抓取，不用担心很长，多是过程（理解过程，有助于以后生产环境中实现不间断升版本），简单粗暴的来总共就下面红字标出的三个命令（当然命令可拆解，kickstsrt一下，system一下，一把来吧，喜欢自动识别，当然如果我步骤错误，或者硬件不支持，或者ios镜像版本错了，会有报错的，比较不错。）
之前记得把固件传到sup1 和 sup2的flash中，两个引擎都要传啊，文件大用tftp太累，建议开启feature ssh ，feature sft，用sftp传，记得sh ver，sh module ，sh boot确认之前状态
boot kickstart bootflash:n7000-s2-kickstart.6.2.16.bin sup-1 sup-2
boot system bootflash:n7000-s2-dk9.6.2.16.bin sup-1 sup-2 install all kickstart bootflash:n7000-s2-kickstart.6.2.16.bin system bootflash:n7000-s2-dk9.6.2.16.bin
install all kickstart bootflash:n7000-s2-kickstart.6.2.16.bin system bootflash:n7000-s2-dk9.6.2.16.bin
之后记得copy running start，保存，然后sh ver，sh module ，sh boot看下有何不同（其实就是sh boot的next boot变了），最后reload 起来后sh ver，sh module ，sh boot（全变了），确认版本正确就行了。
cisco nexus交换机和cisco mds交换机分别用于两个不同的大方向，但架构貌似一样，升级过程几乎一样
全部过程如下：
switch(config)# sh version ###显示现在运行的版本为6.2.2a
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 2.12.0
kickstart: version 6.2(2a)
system: version 6.2(2a)
BIOS compile time: 05/29/2013
kickstart image file is: bootflash:///n7000-s2-kickstart.6.2.2a.bin
kickstart compile time:8/23/2013 15:00:00
system image file is: bootflash:///n7000-s2-dk9.6.2.2a.bin
system compile time: 8/23/2013 15:00:00
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor Module-2")
Intel(R) Xeon(R) CPU with 32745068 kB of memory.
Processor Board> Device name: switch
bootflash: 1966080 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 0 hour(s), 5 minute(s), 39 second(s)
Last reset at 634999 usecs afterTue Jan 24 02:04:20 2017
Reason: Reset triggered due to Switchover Request by User
System version: 6.2(2a)
Service:
plugin
Core Plugin, Ethernet Plugin
switch(config)# show boot ###显示启动文件
Current Boot Variables:
sup-1
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.2a.bin
system variable = bootflash:/n7000-s2-dk9.6.2.2a.bin
sup-2
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.2a.bin
system variable = bootflash:/n7000-s2-dk9.6.2.2a.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.2a.bin
system variable = bootflash:/n7000-s2-dk9.6.2.2a.bin
sup-2
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.2a.bin
system variable = bootflash:/n7000-s2-dk9.6.2.2a.bin
No module boot variable set
switch(config)# dir
0 Sep 30 02:10:43 201420140930_021043_poap_7271_init.log
0 Jan 07 00:43:10 201720170107_004310_poap_7641_init.log
0 Jan 07 01:49:53 201720170107_014953_poap_7649_init.log
96392 Jan 20 20:53:47 201720170117_024219_poap_7636_init.log
510 Sep 30 01:25:05 2014FXS1834Q4EA_910985804.lic
16384 Sep 30 01:22:45 2014lost+found/
425889673 Jan 09 00:37:35 2017n7000-s2-dk9.6.2.16.bin
378617383 Sep 30 01:24:48 2014n7000-s2-dk9.6.2.2a.bin
36697088 Jan 09 00:21:09 2017n7000-s2-kickstart.6.2.16.bin
37094912 Sep 30 01:24:02 2014n7000-s2-kickstart.6.2.2a.bin
4096 Sep 30 02:08:25 2014scripts/
4096 Sep 30 02:07:24 2014vdc_2/
4096 Sep 30 02:07:24 2014vdc_3/
4096 Sep 30 02:07:24 2014vdc_4/
4096 Sep 30 02:07:24 2014vdc_5/
4096 Sep 30 02:07:24 2014vdc_6/
4096 Sep 30 02:07:24 2014vdc_7/
4096 Sep 30 02:07:24 2014vdc_8/
4096 Sep 30 02:07:24 2014vdc_9/
Usage for bootflash://
1003073536 bytes used
771182592 bytes free
1774256128 bytes total
switch(config)# sh version module 1 ###查看某一模块版本
ModNo Image Type SW Version SW Interim VersionBIOS Version
1 SLC 6.2(2a) 6.2(2a) 2.0.15
switch(config)# boot kickstart bootflash:n7000-s2-kickstart.6.2.16.bin sup-1 sup-2 ###设置kickstart 启动文件
Performing image verification and compatibility check, please wait....
Note: system and kickstart bootvars are pointing to incompatible images
switch(config)# boot system bootflash:n7000-s2-dk9.6.2.16.bin sup-1 sup-2 ###设置system 启动文件
Performing image verification and compatibility check, please wait....
switch(config)# copy running-config startup-config ###保存一下 其实应该install all执行完保存一下即可
switch(config)# install all kickstart bootflash:n7000-s2-kickstart.6.2.16.bin system bootflash:n7000-s2-dk9.6.2.16.bin###安装kickstsrt启动文件 这里同时安装 system启动文件一把来。。。
Installer will perform compatibility check first. Please wait.
Verifying image bootflash:/n7000-s2-kickstart.6.2.16.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n7000-s2-dk9.6.2.16.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "lc1n7k" version from image bootflash:/n7000-s2-dk9.6.2.16.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n7000-s2-dk9.6.2.16.bin.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n7000-s2-dk9.6.2.16.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n7000-s2-kickstart.6.2.16.bin.
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Modulebootable ImpactInstall-typeReason
----------------------------------------------
1 yesnon-disruptive rolling
2 yesnon-disruptive rolling
3 yesnon-disruptive rolling
5 yesnon-disruptive reset
6 yesnon-disruptive reset
Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-VersionUpg-Required
----------------------------------------------------------------------------------------
1 lc1n7k 6.2(2a) 6.2(16) yes
1 bios v2.0.15(07/25/11):v2.0.15(07/25/11) v2.0.32(12/16/13) yes
2 lc1n7k 6.2(2a) 6.2(16) yes
2 bios v1.10.14(04/02/10):v1.10.14(04/02/10) v1.10.21(11/26/12) yes
3 lc1n7k 6.2(2a) 6.2(16) yes
3 bios v1.10.14(04/02/10):v1.10.14(04/02/10) v1.10.21(11/26/12) yes
5 system 6.2(2a) 6.2(16) yes
5 kickstart 6.2(2a) 6.2(16) yes
5 bios v2.12.0(05/29/2013):v2.12.0(05/29/2013) v2.12.0(05/29/2013) no
6 system 6.2(2a) 6.2(16) yes
6 kickstart 6.2(2a) 6.2(16) yes
6 bios v2.12.0(05/29/2013):v2.12.0(05/29/2013) v2.12.0(05/29/2013) no
Do you want to continue with the installation (y/n)? y ###确认
Install is in progress, please wait.
Performing runtime checks.
[####################] 100% -- SUCCESS
Syncing image bootflash:/n7000-s2-kickstart.6.2.16.bin to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/n7000-s2-dk9.6.2.16.bin to standby.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 1:Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 2:Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 3:Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 5:Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 6:Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 6: Waiting for module online.
-- SUCCESS
Notifying services about the switchover.
[####################] 100% -- SUCCESS
"Switching over onto standby". ###切换到备引擎了，现在ssh是到备的mgt了，丢包极少。
switch# 2017 Jan 24 02:32:59 switch %MODULE-5-STANDBY_SUP_OK: Supervisor 5 is standby
2017 Jan 24 02:32:59 switch %MODULE-5-LCM_MODULE_UPGRADE_START: Upgrade of module 1 started
2017 Jan 24 02:32:58 switch %SYSMGR-SLOT1-5-LC_UPGRADE_START: Starting linecard upgrade
2017 Jan 24 02:33:17 switch %SYSMGR-SLOT1-5-LC_UPGRADE_REBOOT: Non-disruptively rebooting linecard as a part of upgrade
2017 Jan 24 02:33:58 switch %SYSMGR-SLOT1-4-READCONF_STARTED: Configuration update started (PID 2294).
2017 Jan 24 02:33:59 switch %SYSMGR-SLOT1-5-RUNTIME_DB_RESTORE_STARTED: Runtime database controller started (PID 2295).
2017 Jan 24 02:34:06 switch %SYSMGR-SLOT1-5-RUNTIME_DB_RESTORE_SUCCESS: Runtime database successfully restored.
2017 Jan 24 02:34:18 switch %BIOS_DAEMON-SLOT1-5-BIOS_DAEMON_LC_PRI_BOOT:System booted from Primary BIOS Flash
2017 Jan 24 02:34:31 switch %MODULE-5-LCM_MODULE_UPGRADE_END: Upgrade of module 1 ended
2017 Jan 24 02:34:31 switch %MODULE-5-MOD_OK: Module 1 is online (Serial number: JAF1832AKCS)
2017 Jan 24 02:34:31 switch %PLATFORM-5-MOD_STATUS: Module 1 current-status is MOD_STATUS_ONLINE/OK
2017 Jan 24 02:34:31 switch %SYSMGR-SLOT1-5-MODULE_ONLINE: System Manager has received notification of local module becoming online.
2017 Jan 24 02:34:57 switch %MODULE-5-LCM_MODULE_UPGRADE_START: Upgrade of module 2 started
2017 Jan 24 02:34:57 switch %SYSMGR-SLOT2-5-LC_UPGRADE_START: Starting linecard upgrade
switch#
switch# copy runningstart
switch#> This command will reboot the system. (y/n)? y
switch# sh module ###重启后确认模块版本
ModPortsModule-Type Model Status
------------------------------------------- ------------------ ----------
1 48 1/10 Gbps Ethernet Module N7K-F248XP-25E testing
2 48 1000 Mbps Optical Ethernet XL Modul N7K-M148GS-11L testing
3 48 10/100/1000 Mbps Ethernet XL Module N7K-M148GT-11L testing
5 0 Supervisor Module-2 N7K-SUP2E active *
6 0 Supervisor Module-2 powered-up
ModSw Hw
-----------------------
1 6.2(16) 1.1
2 6.2(16) 1.0
3 6.2(16) 1.1
5 6.2(16) 6.1
ModMAC-Address(es) Serial-Num
---------------------------------------------------
1 50-87-89-45-66-34 to 50-87-89-45-66-67JAF1832AKCS
2 1c-6a-7a-ff-6c-a4 to 1c-6a-7a-ff-6c-d7JAF1746ABSG
3 7c-0e-ce-8f-d2-88 to 7c-0e-ce-8f-d2-bbJAF1832AFEQ
5 50-87-89-46-01-1f to 50-87-89-46-01-31JAF1833APBH
ModOnline Diag Status
---------------------
1 Untested
2 Untested
3 Untested
5 Pass
Xbar PortsModule-Type Model Status
------------------------------------------- ------------------ ----------
1 0 Fabric Module 2 N7K-C7010-FAB-2 ok
2 0 Fabric Module 2 N7K-C7010-FAB-2 ok
3 0 Fabric Module 2 N7K-C7010-FAB-2 ok
Xbar Sw Hw
-----------------------
1 NA 1.6
2 NA 1.6
3 NA 1.6
Xbar MAC-Address(es) Serial-Num
---------------------------------------------------
1 NA JAF1833AMAK
2 NA JAF1833AMBQ
3 NA JAF1833AMDM
* this terminal session
switch# sh ver ###确认版本
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 2.12.0
kickstart: version 6.2(16)
system: version 6.2(16)
BIOS compile time: 05/29/2013
kickstart image file is: bootflash:///n7000-s2-kickstart.6.2.16.bin
kickstart compile time:1/27/2016 9:00:00
system image file is: bootflash:///n7000-s2-dk9.6.2.16.bin
system compile time: 1/27/2016 9:00:00
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor Module-2")
Intel(R) Xeon(R) CPU with 32745060 kB of memory.
Processor Board> Device name: switch
bootflash: 1966080 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 0 hour(s), 4 minute(s), 7 second(s)
Last reset
Reason: Unknown
System version: 6.2(16)
Service:
plugin
Core Plugin, Ethernet Plugin
switch# sh boot ###确认启动项
Current Boot Variables:
sup-1
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.16.bin
system variable = bootflash:/n7000-s2-dk9.6.2.16.bin
sup-2
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.16.bin
system variable = bootflash:/n7000-s2-dk9.6.2.16.bin
No module boot variable set
Boot Variables on next> sup-1
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.16.bin
system variable = bootflash:/n7000-s2-dk9.6.2.16.bin
sup-2
kickstart variable = bootflash:/n7000-s2-kickstart.6.2.16.bin
system variable = bootflash:/n7000-s2-dk9.6.2.16.bin
No module boot variable set
页:
[1]