Cisco基础实验回顾4--IP classless
ip>no ip> 拓扑图：
R1配置：
默认IP> R1(config)#int loopback 0
R1(config-if)#ip address 10.1.1.1 255.255.255.0
R1(config-if)#exit
R1(config)#int s2/0
R1(config-if)#ip address 192.168.12.1 255.255.255.0
R1(config-if)#clock rate 128000
R1(config-if)#no shut
R1(config)#ip route 0.0.0.0 0.0.0.0 s2/0
R2配置：
R2(config)#int loopback 0
R2(config-if)#ip address 10.2.2.2 255.255.255.0
R2(config-if)#exit
R2(config)#int s2/0
R2(config-if)#ip address 192.168.12.2 255.255.255.0
R2(config-if)#no shut
R2(config-if)#clock rate 128000
R2(config-if)#exit
R2(config)#ip route 10.1.1.0 255.255.255.0 s2/0
测试：
R1#ping 10.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 31/31/32 ms
还打算测试no ip>
页:
[1]