华为S2300交换机基本配置
1. 进入华为S2300交换机配置界面并给交换机命名<Quidway>sys //进入system-view视图进行交换机配置Enter system view, return user view with Ctrl+Z. sysname Mill2meetingroom-S2300//设置交换机名字为Mill2meetingroom-S2300（二厂会议室华为S2300） 2. 批量创建VLAN vlan batch 2 to 21
Please wait...
Done. //添加VLAN 2 到 VLAN 21(VLAN 1为默认VLAN)
3. 建立端口组并把端口批量加入端口组里，批量修改端口类型（port link-type） port-group accessmeetingroom//建立端口组accessmeetingroom
group-member Ethernet 0/0/1
to Ethernet 0/0/22 //添加组成员1到22号端口
port link-type access
//设置改端口组成员为access口 Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
Execute command for port is finished.
quit //设置成功后退出端口组配置
4. 批量划分端口VLANvlan 7 port ethernet 0/0/1 to 0/0/16//把1到16号口划分给VLAN 7
quit vlan 6 port ethernet 0/0/17 to 0/0/22 //把1到16号口划分给VLAN 6
quit5. 设置trunk口 port-group trunkmeetingroom
group-member ethernet 0/0/23
to ethernet 0/0/24
port link-type trunk
Error: Link-type trunk conflicts with default VLAN attribute on a port.
Execute command for port is finished.
Error: Link-type trunk conflicts with default VLAN attribute on a port.
Execute command for port is finished.
port trunk allow-pass vlan a
ll Execute command for port is fi
nished. Execute command for port is fi
nished. negotiation auto
Execute command for port is finished.
Execute command for port is finished.
6. 设置交换机管理地址192.168.15.24int vlanif 1shutdown //关闭vlanif 1 Info: Interface Vlanif1 has already been shutdown.
interface vlanif 15 ip address 192.168.15.24 255.255.255.0
undo shutdownInfo: Interface Vlanif15 is not shutdown.quit ip route-static 0.0.0.0 0.0.0.0 192.168.15.254 preferenc
e 60 7. 设置console口
user-interface con 0
idle-timeout 0 0
authentication-mode password
set authentication password cipher dabaicai
quit
8. 设置远程登录
user-interface vty 0 4
idle-timeout 0 0
authentication-mode password
set authentication password cipher dabaicai
user privilege level 15
quit
9. 查看交换机当前配置
display current-configuration
# Error:Wrong parameter found
# sysname Mill2meetingroom-S2300
cluster enable
ntdp enable
ntdp hop 16
ndp enable vlan batch 1 to 21
# bpdu enable
set aut
ntdp enableassword ciph
ntdp hop 16
ndp enable
# voice-vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 description Siemens p
hone voice-vlan mac-address 0003-6b00-0000 mask ffff-ff00-0000 description Cisco pho
ne voice-vlan mac-address 0004-0d00-0000 mask ffff-ff00-0000 description Avaya pho
ne voice-vlan mac-address 0060-b900-0000 mask ffff-ff00-0000 description Philips/N
EC phone voice-vlan mac-address 00d0-1e00-0000 mask ffff-ff00-0000 description Pingtel p
hone voice-vlan mac-address 00e0-7500-0000 mask ffff-ff00-0000 description Polycom p
hone voice-vlan mac-address 00e0-bb00-0000 mask ffff-ff00-0000 description 3com phon
e# undo http server enable
#interface Vlanif1 shutdown ip address dhcp-alloc
#interface Vlanif15 ip address 192.168.15.24 255.255.255.0
#interface Ethernet0/0/1 port link-type access
port default vlan 7
ntdp enable
ndp enable
#interface Ethernet0/0/2 port link-type access
port default vlan 7
ntdp enable
ndp enable # interface Ethernet0/0/3 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/4 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/5 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/6 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/7 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/8 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/9 port link-type access
port default vlan 7
ntdp enable
ndp enable#interface Ethernet0/0/10 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/11 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/12 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/13 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/14 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/15 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/16 port link-type access
port default vlan 7
ntdp enable
ndp enable #interface Ethernet0/0/17 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/18 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/19 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/20 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/21 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/22 port link-type access
port default vlan 6
ntdp enable
ndp enable#interface Ethernet0/0/23 port default vlan 1 port trunk allow-pass vlan 1 to 4094
ntdp enable
ndp enable#interface Ethernet0/0/24 port default vlan 1 port trunk allow-pass vlan 1 to 4094
ntdp enable
ndp enable#interface GigabitEthernet0/0/1 port default vlan 1 ntdp enable
ndp enable#interface GigabitEthernet0/0/2 port default vlan 1
ntdp enable
ndp enable#interface NULL0aaa authentication-scheme default
authorization-scheme default accounting-scheme default domain default
domain default_admin
# ip route-static 0.0.0.0 0.0.0.0 192.168.15.254
#user-interface con 0 authentication-mode password set authentication password cipher EJ<VT&QM)6+Q=^Q`MAF4<1!!
idle-timeout 0 0user-interface vty 0 4 user privilege level 15
set authentication password cipher EJ<VT&QM)6+Q=^Q`MAF4<1!!
idle-timeout 0 0# port-group accessmeetingroom
group-member Ethernet0/0/1 group-member Ethernet0/0/2 group-member Ethernet0/0/3Ethernet0/0/4 group-member Ethernet0/0/5 group-member Ethernet0/0/6 group-member Ethernet0/0/7 group-member Ethernet0/0/8 group-member Ethernet0/0/9 group-member Ethernet0/0/10 group-member Ethernet0/0/11
group-member Ethernet0/0/12 group-member Ethernet0/0/13 group-member Ethernet0/0/14 group-member Ethernet0/0/15
group-member Ethernet0/0/16 group-member Ethernet0/0/17 group-member Ethernet0/0/18 group-member Ethernet0/0/19 group-member Ethernet0/0/20
group-member Ethernet0/0/21 group-member Ethernet0/0/22# port-group trunkmeetingroom
group-member Ethernet0/0/23 group-member Ethernet0/0/24#Return 10. 错误处理 出现的错误提示的原因在于设置trunk口时首先需要取消端口默认VLAN(port default vlan), 也就是VLAN 1
port-group trunkmeetingroom
undo port default vlan
Execute command for port is finished.
Execute command for port is finished.
port link-type trunk Execute command for port is finished.
Execute command for port is finished.
port trunk allow-pass vlan all Execute command for port is fi
nished. Execute command for port is fi
nished.negotiation auto Execute command for port is finished.
Execute command for port is finished.
quit 11. 保存配置quit<Mill2meetingroom-S2300>save The current configuration will be written to the device.
Are you sure to continue?y Now saving the current configuration to the device.
Jan1 2008 01:36:17 Mill2meetingroom-S2300 %%01CFM/4/SAVE(l): When deciding whe
ther to save configuration to the device, the user chose Y.................
Info: The current configuration was saved to the device successfully.
重新查看S2300配置，trunk口已经配置完毕。<Mill2meetingroom-S2300>disp cu# interface Ethernet0/0/23
port link-type trunk port trunk allow-pass vlan 1 to 4094 ntdp enable ndp enable# interface Ethernet0/0/24
port link-type trunk port trunk allow-pass vlan 1 to 4094 ntdp enable ndp enable
页:
[1]