华为VRRP配置详解
1.实验拓扑如下图：2.路由器端口配置ip，如拓扑图所示，配置如下
R1配置：
interface g0/0/0
ip address 192.168.1.25424
interface g0/0/1
ip address 192.168.13.124
R2配置：
interface g0/0/0
ip add
ip address 192.168.1.25324
int g0/0/1
ip add
ip address 192.168.23.124
R3配置：
interface g0/0/0
ip ad
ip address 192.168.13.224
interface g0/0/0
ip ad
ip address 192.168.13.224
ip address 10.0.0.124
3.R1、R2配置vrrp，并监控g0/0/1
vrrp vrid 1 virtual-ip 192.168.1.250
vrrp vrid 1 track interface g0/0/1reduced 50
vrrp vrid 1 virtual-ip 192.168.1.250
vrrp vrid 1 track interface g0/0/1 reduced 51
4.R1、R2、R3配置静态路由，确保全网互通
ip route-static10.0.0.1255.255.255.0192.168.13.2
ip route-static10.0.0.1255.255.255.0192.168.23.2
ip route-static 192.168.1.0255.255.255.0192.168.13.1
ip route-static 192.168.1.0 255.255.255.0 192.168.23.1
5.测试
R1上查看vrrp
R2上查看
PC上测试
6.模拟R2->R3线路故障，测试路由
在PC上跟踪路由
R2上看vrrp
vrrp自动切换R2为master路由，链路备份成功。
页:
[1]