lujiguo115 发表于 2018-7-24 11:05:13

华为交换机的堆叠使用

  a、查看堆叠信息
  <Quidway>            dis stack
  Stack topology type: Ring                                          #堆叠拓扑结构 分为link和ring
  Stack system MAC: 384c-4fa0-3180                           #堆叠系统的mac地址,这里是堆叠主交换机mac地址
  MAC switch delay time: 10 min                                  #堆叠系统MAC地址切换时间
  Stack reserved vlan: 4093                                           #堆叠系统保留vlan 4093
  Slot of the active management port: --                  #管理网口所在槽位
  Slot      Role      Mac address      Priority   Device type
  -------------------------------------------------------------
  0   Master      384c-4fa0-3180   255      S5700-48TP-SI-AC
  1   Standby   384c-4fa2-53d0   1          S5700-48TP-SI-AC
  b、查看邻居状态
  <Quidway>disstackpeers
  Slot#   Port1                   Peer1       Port2                   Peer2
  ---------------------------------------------------------------------------
  0   STACK 1                   1         STACK 2                   1
  1   STACK 1                   0         STACK 2                   0
  c、查看堆叠配置信息
  <Quidway>disstackconfiguration
  Current Slot-id    Next Slot-id    Current Priority    Next Priority
  --------------------------------------------------------------------
  0                0                255               255
  1                1                1               1
  <Quidway>dis stackconfiguration slot 1
  Current Slot-id    Next Slot-id    Current Priority    Next Priority
  --------------------------------------------------------------------
  1                1                1               1
  <Quidway>dis stackconfiguration slot 0
  Current Slot-id    Next Slot-id    Current Priority    Next Priority
  --------------------------------------------------------------------
  0                0                255               255
  d、直连检测配置(多主检测的一种)
  maddetectmodedirect
  Warning: This command will block the port, and no other configuration running on this port is recommended. Continue?:y
  
  Oct1 2008 00:46:29+08:00 Quidway DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 1, the change loop count is 0, and the maximum number of records is 4095.
  主设备上由于依然是主,所以是detect
  <Quidway>dis mad verbose
  Current MAD domain: 0
  Current MAD status: Recovery
  Mad direct detect interfaces configured:
  GigabitEthernet1/0/2

  Mad>  Excluded ports(configurable):
  Excluded ports(can not be configured):
页: [1]
查看完整版本: 华为交换机的堆叠使用