华为5100——线路模板脚本
SuiXi5100>enable SuiXi5100#configure terminalSuiXi5100(config)#adsl line-profile add//增加线路模板
[<index>]{2-99}:97//设置索引号
During input,press 'Q' to quit,then settings at this time are neglected.
> Please choose default value type 0-adsl 1-adsl2+(0~1) : 1//选择模板类型，1代表ADSL2+
> Will you set basic configuration for modem? (y/n) :y//进行基本设置
Note: Setting to these mode of G992.3~5 will lead that the adsl ports that are not support adsl2+ not be activated
> ADSL operating mode:
>0: All(G992.1~5, T1.413)
>1: Full rate(G992.1/3/5 or T1.413)
>2: g.lite(G992.2/4) (ADLI can not support )
>3: T1.413 (ADLI can not support )
>4: g.dmt(G992.1/3/5)
>5: g.hs(G992.1~5, G992.5 is prior)
>6: G992.1
>7: G992.2 (ADLI can not support )
>8: G992.3
>9: G992.4
>10: G992.5
>11: ADSL all(G992.1~2, T1.413)
Please select(0~11) : 0//选择0选项ALL
> Trellis coding 0-disable 1-enable (0~1) : //默认采用栅格编码
> Upstream channel bit swap 0-disable 1-enable (0~1) : //开启上行通道交换
> Downstream channel bit swap 0-disable 1-enable (0~1) : //开启下行通道交换
> Please select channel mode 0-interleaved 1-fast (0~1) : 0//默认为交织方式
> Will you set interleave delay? (y/n) : y//设置交织延迟
> Max downstream interleaved delay(0~255 ms) :32 //最大下行延迟
> Max upstream interleaved delay(0~255 ms) :26 //最大上行延迟
> Please select form of transmit rate adaptation in downstream: //选择下行速率模式
> 0-fixed 1-adaptAtStartup 2-adaptAtRuntime (0~2) :2//运行态自适应模式
> Will you set SNR margin for modem? (y/n) :y //设置modem噪声容限
> Target SNR margin in downstream (0~15 dB) : 下行目标噪声容限
> Min SNR margin in downstream (0~6 dB) ://设置下行最小噪声容限
> Max SNR margin in downstream (6~31 dB) :// 设置下行最大噪声容限
> Target SNR margin in upstream (0~15 dB) ://设置上行噪声容限
> Min SNR margin in upstream (0~6 dB) : //上行最小容限
> Max SNR margin in upstream (6~31 dB) ://上行最大容限
> Downstream SNR margin for rate downshift (0~6 dB) :
> Downstream SNR margin for rate upshift (6~31 dB) :
> Upstream SNR margin for rate downshift (0~6 dB) :
> Upstream SNR margin for rate upshift (6~31 dB) :
> Will you set shifttime? (y/n) :
> Will you set parameters for rate? (y/n) : y //设置速率参数
> Min bit rate in downstream (32~32000 Kbps) : 64
> Max bit rate in downstream (64~32000 Kbps) :
> Min bit rate in upstream (32~3000 Kbps) :
> Max bit rate in upstream (32~3000 Kbps) : 1000
Add profile 97 successfully
SuiXi5100(config)#eixt
Incorrect command:eixt
SuiXi5100(config)#q
Incorrect command:q
SuiXi5100(config)#exit
SuiXi5100#save
2008/11/23 11:34:38 minorLAN: Not enough IGMP pvc(0/13)
Are you sure to save system data?(y/n) :http://cnc.imgcache.qq.com/ac/b.gif
页:
[1]