q986 发表于 2018-7-28 06:39:41

juniper ex交换机 vlan qos配置

　　set firewall policer connection-policer if-exceeding bandwidth-limit 100m
　　set firewall policer connection-policer if-exceeding burst-size-limit 128k
　　set firewall policer connection-policer then discard
　　set firewall familyethernet-switching filter ingress-vlan-rate-limit term 1 from source-address 192.168.100.100/32
　　set firewall familyethernet-switching filter ingress-vlan-rate-limit term 1 from destination-address x.x.x.x/y
　　set firewall familyethernet-switching filter ingress-vlan-rate-limit term 1 then policer connection-policer
　　set firewall familyethernet-switching filter ingress-vlan-rate-limit term 2 then accept
　　set vlans vlan-100 filter input ingress-vlan-rate-limit
页: [1]
查看完整版本: juniper ex交换机 vlan qos配置