zhouyi 发表于 2018-12-25 14:11:00

LVS+Heartbeat+memcached+nfs Web集群的构建

  一、说明
  LVS 是Linux VirtualServer,主要用来实现后端服务的负载均衡,用源码包ipvsadm构建,本文使用基于tunneling模式的转发机制,调度算法使用 weighted Least-connected(wlc),即每个新的连接被分配到负担最小的服务器。
  Heartbeat 是一种心跳检测机制,主要用来实现双机互备份,它的接管工作是通过ARP欺骗的手段来完成的。
  Memcached memcached不是memcache,它是高性能的,分布式的内存对象缓存系统,用于在动态应用中减少数据库负载,提升访问速度。在本文主要用来实现session共享。
  NFS 在本文用来实现web源程序目录挂载到web服务器的本地目录
  1.拓扑图
http://blog.运维网.com/architect/运维网.com/uploads/allimg/110226/14253919C-0.jpg
  2.服务器主机名与IP分配
  VIP:192.168.1.10
  Virtual Server
  主机名:lvs1
  Eth0_IP:192.168.1.2/24
  Eth1_IP:192.168.10.9/29(heartbeat line)
  Virtual Server_backup
  主机名:lvs2
  Eth0_IP:192.168.1.3/24
  Eth1_IP:192.168.10.10/29(heartbeat line)
  Real Server web1
  主机名:web1
  IP:192.168.1.4/24
  Real Server web2
  主机名:web2
  IP:192.168.1.5/24
  Memcached and web code
  主机名:share
  IP:192.168.1.6/24
  Mysql server
  主机名:data
  IP:192.168.1.7/24
  二、安装与配置LVS
  1.安装 ipvsadm
  # tar zxvf ipvsadm-1.24.tar
  # cd ipvsadm-1.24
  # ln –s /usr/src/kernels/2.6.18-53.el5-i686/ /usr/src/linux
  # make
  # make install
  2. Configure shell of tunlvs on Vritual Server and Vritual server_backup
  # vi /etc/rc.d/init.d/tunlvs
  #!/bin/sh
  VIP=192.168.1.10
  WEB1=192.168.1.4
  WEB2=192.168.1.5
  /etc/rc.d/init.d/functions
  case "$1" in
  start)
  echo "start LVS directorserver"
  /sbin/ifconfig tunl0 $VIP broadcast $VIP netmask 255.255.255.255 up
  /sbin/route add -host $VIP dev tunl0
  /sbin/ipvsadm -C
  /sbin/ipvsadm -A -t $VIP:80 -s wlc
  /sbin/ipvsadm -a -t $VIP:80 -r $WEB1:80 -i
  /sbin/ipvsadm -a -t $VIP:80 -r $WEB2:80 -i
  /sbin/ipvsadm
  ;;
  stop)
  echo "close LVS directorserver"
  /sbin/ipvsadm -C
  ;;
  *)
  echo "Usage:$0 {start|stop}"
  exit 1
  esac
  # chmod 755 /etc/rc.d/init.d/tunlvs
  3、Configure shell of tunl on Real_web1 and Real_web2
  # vi /etc/rc.d/init.d/tunl
  #!/bin/sh
  VIP=192.168.1.10
  /etc/rc.d/init.d/functions
  case "$1" in
  start)
  echo "tunl port starting"
  /sbin/ifconfig tunl0 $VIP broadcast $VIP netmask 255.255.255.255 up
  /sbin/ifconfig add -host $VIP dev tunl0
  echo "1">/proc/sys/net/ipv4/conf/tunl0/arp_ignore
  echo "2">/proc/sys/net/ipv4/conf/tunl0/arp_announce
  echo "1">/proc/sys/net/ipv4/conf/all/arp_ignore
  echo "2">/proc/sys/net/ipv4/conf/all/arp_announce
  sysctl –p
  ;;
  stop)
  echo "tunl port closing"
  ifconfig tunl0 down
  echo "1">/proc/sys/net/ipv4/ip_forward
  echo "0">/proc/sys/net/ipv4/conf/all/arp_announce
  ;;
  *)
  echo "Usege:$0 {start|stop}"
  exit 1
  esac
  4、test lvs
  Virtual Server:
  # /etc/rc.d/init.d/tunlvs start
  Real_web1 and Real_web2:
  # /etc/rc.d/init.d/tunl start
  Real_web1:
  # echo “this is test for web1”>>/var/www/html/index.html
  Real_web2:
  # echo “this is test for web2”>>/var/www/html/index.html
  五、NFS与Memcached(Session共享)
  1.Nfs
  # rpm -ivh /mnt/CentOS/portmap-4.0-65.2.2.1.i386.rpm
  # rpm -ivh /mnt/CentOS/nfs-utils-1.0.9-24.el5.i386.rpm
  # vi /etc/exports
  /webdata 192.168.1.4(rw,sync,no_wdelay) 192.168.1.5(rw,sync,no_wdelay)
  # chkconfig –level 35 portmap on
  # chkconfig –level 35 nfs on
  # /etc/rc.d/init.d/portmap start
  # /etc/rc.d/init.d/nfs start
  2.Memcached
  # rpm –ivh /mnt/Centos/ libevent-1.1a-3.2.1.i386.rpm
  # rpm –ivh /mnt/Centos/ libevent-devel-1.1a-3.2.1.i386.rpm
  # tar zxvf memcached-1.2.6.tar.tar
  # ./configure
  # make && make install
  # memcached -d -m 512 –l 192.168.1.6 -p 11211 -u root
  # killall –HUP memcached
  六、挂载 web主目录与配置php使用session共享
  Real_web1 and Real_web2
  1.mount
  # showmount –e 192.168.1.6
  # mount –t nfs 192.168.1.6:/webdata /var/www/html
  # vi /etc/fstab
  192.168.1.6:/webdata /var/www/html nfs defaults 0 0
  2. 配置php使用session共享
  # tar zxvf memcache-2.2.3.tgz
  # phpize
  # ./configure –enable-memcache
  # make && make install
  # vi /etc/php.ini
  
  extension=memcache.so
  extension_dir = "/usr/lib/php/modules"
  session.save_handler = memcache
  session.save_path = “tcp://192.168.1.6:11211”
  七、监控页的设置
  Real_web1 and Real_web2:
  这里是配合ldirectord.cf的ldirectord守护进程
  # mkdir /var/www/test
  # vi /etc/httpd/conf/httpd.conf
  Alias /test/ "/var/www/test/"
  
  Options FollowSymLinks
  AllowOverride None
  Order allow,deny
  Allow from all
  
  # echo "Test Page" > /var/www/test/test.html
  八、Mysql Server
  # /etc/rc.d/init.d/mysqld start
  # mysqladmin -u root -p password test
  # mysql –root –p

  > grant all on *.* to mysql@’192.168.1.0/24’>  > flush privileges;
  > quit;

页: [1]
查看完整版本: LVS+Heartbeat+memcached+nfs Web集群的构建