LVS+keepalived生产环境实现电信联通双VIP(DR模式)
参考:http://duyunlong.blog.运维网.com/1054716/1118447
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.LVS-DR.html
http://www.cnblogs.com/Eivll0m/p/4580826.html
防火墙配置参考:http://wgkgood.blog.运维网.com/1192594/1102870
server全部为centos6.8
# uname -a
Linux iiw_MASTER 2.6.32-642.4.2.el6.x86_64 #1 SMP Tue Aug 23 19:58:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
一:需求.由于前期经费有限,说白了就是没钱.
只能使用单主机做keepalived master,后端三台nginx提供web服务.开发80,443端口.
所需的ip为(安全原因ip都未虚构):
电信IP联通IPVIP10.10.10.214 36.10.10.86
keepaliver master主机10.10.10.213 36.10.10.85 realserver1主机10.10.10.21536.10.10.87realserver2主机10.10.10.21636.10.10.88realserver3主机10.10.10.21736.10.10.89 二.流程
[*] masterserver主机(ip:10.10.10.213),安装lvs+keeplived.开启ip转发功能.
[*]# cat /etc/sysctl.conf
net.ipv4.ip_forward = 1
[*] realserver安装nginx,并开启服务.略
[*] masterserver,realserver 防火墙开发80,443端口.开放虚拟路由广播:
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -p tcp --dport 443 -j ACCEPT 4.后端realserver,VIP绑定脚本文件为:
$ cat /etc/init.d/realserver.sh
#!/bin/bash
SNS_VIP=10.10.10.214#电信vip
SNS_VIP1=36.10.10.86#联通vip
. /etc/rc.d/init.d/functions
case "$1" in
start)
ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP up
/sbin/route add -host $SNS_VIP dev lo:0
ifconfig lo:1 $SNS_VIP1 netmask 255.255.255.255 broadcast $SNS_VIP1 up
/sbin/route add -host $SNS_VIP1 dev lo:1
echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p > /dev/null 2>&1
echo "RealServer Start OK"
;;
stop)
ifconfig lo:0 down
route del $SNS_VIP >/dev/null 2>&1
ifconfig lo:1 down
route del $SNS_VIP1 >/dev/null 2>&1
echo "0" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" > /proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stoped"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0 开启脚本:
$ /etc/init.d/realserver.sh start 检测vip是否存在:
$ ifconfig
............................
lo:0 Link encap:Local Loopback
inet addr:10.10.10.214Mask:255.255.255.255
UP LOOPBACK RUNNINGMTU:65536Metric:1
lo:1 Link encap:Local Loopback
inet addr:36.10.10.86Mask:255.255.255.255
UP LOOPBACK RUNNINGMTU:65536Metric:1 可见我们所需的两个VIP已经绑定在网卡l0:0,l0:1上.
5.masterserver上keepalived的配置:
# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_MASTER
}
#电信vip设置.
vrrp_instance VI_1 {
state MASTER #注意此住为master状态
interface eth0 #检测eth0网卡
virtual_router_id 51 #注意id是51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.10.10.214
}
}
#联通VIP设置
vrrp_instance VI_2 {
state MASTER #注意此住为master状态
interface eth0#检测eth0网卡
virtual_router_id 52#复制的时候注意此处id是52,不要跟电信VIP相同
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
36.10.10.86
}
}
virtual_server 10.10.10.214 80 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mark 255.255.255.0
protocol TCP
real_server 10.10.10.215 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.10.10.216 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 10.10.10.217 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
virtual_server 10.10.10.214 443 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mark 255.255.255.0
protocol TCP
real_server 10.10.10.215 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
real_server 10.10.10.216 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
real_server 10.10.10.217 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
}
virtual_server 36.10.10.86 80 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mark 255.255.255.0
protocol TCP
real_server 36.10.10.87 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 36.10.10.88 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 36.10.10.89 80 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
virtual_server 36.10.10.86 443 {
delay_loop 6
lb_algo wrr
lb_kind DR
nat_mark 255.255.255.0
protocol TCP
real_server 36.10.10.87 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
real_server 36.10.10.88 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
real_server 36.10.10.89 443 {
weight 1
TCP_CHECK {
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
connect_port 443
}
}
} 在此,我将两个VIP分别绑定在两个vrrp_instance上,并且每个vrrp_instance都设置为master.然后启动keepalived
# service keepalived start 检测vip:
# ip add
1: lo:mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0:mtu 1500 qdisc mq state UP qlen 1000
link/ether 3c:4a:92:e0:d1:30 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.213/27 brd 10.10.10.223 scope global eth0
inet 36.10.10.85/27 brd 36.10.10.95 scope global eth0:0
inet 10.10.10.214/32 scope global eth0
inet 36.10.10.86/32 scope global eth0
inet6 fe80::3e4a:92ff:fee0:d130/64 scope li 可见我们所需的vip已经绑定在eth0上:
inet 10.10.10.214/32 scope global eth0
inet 36.10.10.86/32 scope global eth0
6.使用ipvsadm检测后端realserver是否ok轮询:
# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP36.10.10.86:80 wrr
-> 36.10.10.87:80 Route 1 0 18
-> 36.10.10.88:80 Route 1 0 17
-> 36.10.10.89:80 Route 1 0 17
TCP36.10.10.86:443 wrr
-> 36.10.10.87:443 Route 1 0 2
-> 36.10.10.88:443 Route 1 0 5
-> 36.10.10.89:443 Route 1 0 3
TCP10.10.10.214:80 wrr
-> 10.10.10.215:80 Route 1 7 25
-> 10.10.10.216:80 Route 1 11 25
-> 10.10.10.217:80 Route 1 7 25
TCP10.10.10.214:443 wrr
-> 10.10.10.215:443 Route 1 4 3
-> 10.10.10.216:443 Route 1 1 6
-> 10.10.10.217:443 Route 1 1 4 通过这个命令可见,后端三台realserver的nginx 80,443端口被完全识别.
7.通过hosts绑定网站为联通VIP36.10.10.86.通过AB软件测试:
root@huwei:/home/huwei# ulimit -SHn 51200
root@huwei:/home/huwei# ab -n 10000 -c 100 "http://www.iiii111.com" 测试,通过http访问网站1w次,使用watch "lpvsadm"查看会不会平均分布到后端realserver
# watch "ipvsadm"Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP36.10.10.86:http wrr
-> 36.10.10.87:http Route 1 0 3354
-> 36.10.10.88:http Route 1 0 3354
-> 36.10.10.89:http Route 1 0 3354 换https测试:
root@huwei:/home/huwei# ab -n 10000 -c 100 "https://www.iiii111.com" 结果:
TCP36.10.10.86:https wrr
-> 36.10.10.87:https Route 1 0 3366
-> 36.10.10.88:https Route 1 0 3364
-> 36.10.10.89:https Route 1 1 3366 可见,轮询成功.
换hosts绑定电信vip再测也正常.
到此结束.
总结:1.keepalived后端的nginx 80,443端口不要写错.
2.防火墙配置要正确.
3.后端服务器vip脚本先记得要启动,并检查vip ip有没有绑定好.
页:
[1]