高可用载均衡之LVS+Keepalived
高可用负载均衡之LVS+Keepalived一、LVS+Keepalived介绍：
LVS是Linux Virtual Server的简称，也就是Linux虚拟服务器,通过LVS提供的负载均衡技术和Linux操作系统实现一个高性能、高可用的服务器群集，它具有良好可靠性、可扩展性和可操作性。从而以低廉的成本实现最优的服务性能。
Keepalived就是一个类似于3~5层交换机制的软件，具有3~5层交换功能，其主要作用是检测web服务器的健康状态，如果某台web服务器故障，Keepalived将检测到并将其从系统中剔除，当该web服务器工作正常后Keepalived自动将其加入到服务器群中，这些工作全部自动完成，而不需要人工干预，只需要人工修复故障的web服务器即可。
二、搭建LVS（DR模式）+ Keepalived高可用
1. 服务器IP规划：
Master DIP(192.168.126.1) VIP(192.168.126.5)
Backup DIP(192.168.126.2) VIP(192.168.126.5)
RIP (192.168.126.3) VIP(192.168.126.5)
RIP (192.168.126.3) VIP(192.168.126.5)
2.MASTER配置部分：
编译安装LVS：Make && make install
报错：make: *** Error 1
make: *** Error 2
解决：yum installlibnl*
编译安装Keepalived
./configure–prefix=/usr/local/keepalived
cp/usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
cp/usr/local/etc/sysconfig/keepalived /etc/sysconfig/
cp/usr/local/keepalived/sbin/keepalived /usr/sbin/
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf/etc/keepalived/
配置在主负载均衡服务器上配置keepalived.conf
#vi /etc/keepalived/keepalived.conf (master)
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
priority 101
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.126.132/32 dev eth0 label eth0:0
}
}
virtual_server 192.168.126.132 80 {
delay_loop 6 #(每隔6秒查询realserver状态)
lb_algo rr #(lvs 算法)
lb_kind DR #(Direct Route)
nat_mask 255.255.255.0 #(同一IP的连接60秒内被分配到同一台realserver)
protocol TCP #(用TCP协议检查realserver状态)
real_server 192.168.126.131 80 {
weight 1 #(权重)
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.126.149 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
ipvsadm–C 清除所有规则
ipvsadm-A -t 192.168.126.1132:80 -s wlc
ipvsadm-a -t 192.168.126.132:80 -r 192.168.126.131 -g -w 2
ipvsadm-a -t 192.168.126.132:80 -r 192.168.126.149 -g -w 1
ipvsadm-L –n 查看规则
ipvsadm–S 保存规则
3.BACKUP配置部分：
编译安装LVS：Make && make install
报错：make: *** Error 1
make: *** Error 2
解决：yum installlibnl*
编译安装Keepalived
./configure–prefix=/usr/local/keepalived
cp/usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
cp/usr/local/etc/sysconfig/keepalived /etc/sysconfig/
cp/usr/local/keepalived/sbin/keepalived /usr/sbin/
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf/etc/keepalived/
配置在主负载均衡服务器上配置keepalived.conf
#vi /etc/keepalived/keepalived.conf (备调度器Backup)
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id LVS_DEVEL
}
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.2.170/32 eth0 label eth0:0
}
}
virtual_server 192.168.126.13280 {
delay_loop 6
lb_algo rr
lb_kind DR
nat_mask 255.255.255.0
protocol TCP
real_server 192.168.126.131 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.126.149 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
ipvsadm–C 清除所有规则
ipvsadm -A -t 192.168.126.1132:80 -s wlc
ipvsadm -a -t 192.168.126.132:80 -r 192.168.126.131 -g -w 2
ipvsadm -a -t 192.168.126.132:80 -r 192.168.126.149 -g -w 1
ipvsadm -L –n 查看规则
ipvsadm–S 保存规则
4.Real-Server1配置部分：
Echo 1 > /proc/sys/net/ipv4/conf/eth0/arp_ignore
Echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
Echo 2 > /proc/sys/net/ipv4/conf/eth0/arp_arp_announce
Echo 2 > /proc/sys/net/ipv4/conf/all/arp_arp_announce
限定linux主机对arp广播请求的响应级别，以及向外通告自己的IP地址的，通告级别！
配置虚拟IP:
ifconfiglo:0 192.168.100.1(VIP) netmask 255.255.255.255 broadcast 192.168.1.255(广播地址) up
Routeadd –host ip(vip) dev eth0:0
RS上要做路由，要是不做路由响应客户端时会用eth0响应，而不是VIP
Service httpdrestart
Echo “this isreal-server1” > /var/www/html/index.html
开启路由转发
5.Real-Server2配置部分:
Echo 1 >/proc/sys/net/ipv4/conf/eth0/arp_ignore
Echo 1 >/proc/sys/net/ipv4/conf/all/arp_ignore
Echo 2 > /proc/sys/net/ipv4/conf/eth0/arp_arp_announce
Echo 2 > /proc/sys/net/ipv4/conf/all/arp_arp_announce
限定linux主机对arp广播请求的响应级别，以及向外通告自己的IP地址的，通告级别！
配置虚拟IP:
ifconfiglo:0 192.168.100.1(VIP) netmask 255.255.255.255 broadcast 192.168.1.255(广播地址) up
Routeadd –host ip(vip) dev eth0:0
RS上要做路由，要是不做路由响应客户端时会用eth0响应，而不是VIP
Service httpdrestart
Echo “this isreal-server1” > /var/www/html/index.html
开启路由转发
注意：Rlear-Server限定linux主机对arp广播请求的响应级别后在配置VIP
Keepalived.conf配置文件定要copy到/etc/目录下
页:
[1]