LVS fullnat安装
阿里巴巴开源LVS fullnat（内核要求2.6.32）1、下载 fullnat LVS源码
wget https://github.com/alibaba/LVS/tree/lvs_v2 #版本2，建议使用这个版本
wget https://github.com/alibaba/LVS/archive/master.zip
unzip aster.zip;#解压下载的源码，主要有以下文件目录，其中 kernel目录是内核源码，tools里有ipvsadm 、keepalived、quagga（可以使用Quagga将linux机器打造成一台功能完备的路由器）、rpm
AUTHORSCHANGESdocskernelREADME.mdtools
2、内核编译&安装
cd/usr/local/src/LVS-lvs_v2/kernel
请先安装好 perl perl-devel popt popt-devel libnl libnl-devel libssl libssl-devel openssl openssl-devel popt-static yum -y install ncurses ncurses-devel
去掉 udev，udev的编译要求比较严格，容易在启动时报udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option;出现这个错问题也不大
vi .config
CONFIG_SYSFS_DEPRECATED=n
CONFIG_SYSFS_DEPRECATED_V2=n
mkdir -p /usr/src/kernels/2.6.32
make O=/usr/src/kernels/2.6.32 menuconfig; #选择模块需要编译的，exit退出，选择 YES保存
make mrproper
make O=/usr/src/kernels/2.6.32
make O=/usr/src/kernels/2.6.32 modules_install install
make时遇错
/bin/sh: perl: command not found
make: *** Error 127
make: *** Error 2
make: *** Error 2
解决：yum -y perl perl-devel
make install遇错
WARNING: Couldn't open directory /lib/modules/2.6.32: No such file or directory
解决：ln -s /lib/modules/`uname -r` /lib/modules/2.6.32
问题：make install时报
sh /usr/local/src/LVS-lvs_v2/kernel/arch/x86/boot/install.sh 2.6.32 arch/x86/boot/bzImage \
System.map "/boot"
ERROR: modinfo: could not find module sd_mod
ERROR: modinfo: could not find module crc_t10dif
解答：这是因为现在运行的kernel有这些模块，而新编译的内核没有这些模块。如果不需要可直接忽视，如果需要编译到新的内核中，请修改 .config的相关参数为=m
使用新编译的内核vi /boot/grub/grub.conf 修改
default=0
reboot 重启系统，uname -r查看到的版本应该是2.6.32
3、安装keepalived
要求先安装好 openssl openssl-devel popt-static
cd/usr/local/src/master/tools/keepalived/
./configure --prefix=/usr/local/keepalived --with-kernel-dir=/usr/local/src/LVS-lvs_v2/kernel;
make;
最终结果：
Keepalived configuration
------------------------
Keepalived version : 1.2.2
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto-lnl
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
IPVS use libnl : Yes
Use VRRP Framework : Yes
Use Debug flags : No
make install;
默认路径： /usr/local
配置文件： /usr/local/etc/keepalived/keepalived.conf
自动启动脚本模板： /usr/local/etc/rc.d/init.d/keepalived
复制安装目录下的 /usr/local/keepalived/etc/rc.d/init.d/keepalived 复制到 /etc/init.d/
把/etc/init.d/keepalived文件中
. /etc/sysconfig/keepalived 改为
. /usr/local/keepalived/etc/sysconfig/keepalived
keepalived启动时报 Starting keepalived: /bin/bash: keepalived: command not found
解决方法：ln -s prefix/sbin/keepalived /usr/sbin/
4、安装ipvsadm
依赖 libnl libnl-devellibssl-devel libssl
cd /usr/local/src/LVS-lvs_v2/tools/ipvsadm/
make;
make install;
make遇错
gcc-Wall -Wunused -Wstrict-prototypes -g -o ipvsadm ipvsadm.o config_stream.o dynamic_array.o ../keepalived/keepalived/libipvs-2.6/libipvs.a -lpopt-lnl
/usr/bin/ld: cannot find -lnl
collect2: ld returned 1 exit status
make: *** Error 1
解决：yum -y install libnl libnl-devellibssl-devel libssl
5、安装quagga
cd /usr/local/src/LVS-lvs_v2/tools/quagga
./configure --prefix=/usr/local/quagga
make;
make install;
接下来的配置请参照 LVS操作手册
查看IPVS详情
查看 /proc/net目录下的
ip_vs ip_vs_app ip_vs_conn ip_vs_conn_syncip_vs_ext_statsip_vs_stats
good haowen
页:
[1]