smokeping 安装流程
yum -y install httpd-devel libxml2-devel libpng-devel glib pango pango-devel freetype freetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel安装rrdtool 1.4.7
wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.7.tar.gz
tar zxvf rrdtool-1.4.7.tar.gz
cd rrdtool-1.4.7
./configure --prefix=/usr/local/rrdtool
make && make install
安装cgilib
wget http://down1.chinaunix.net/distfiles/cgilib-0.5.tar.gz
tar zxvf cgilib-0.5.tar.gz
cd cgilib-0.5
make
cp libcgi.a /usr/local/lib
cp cgi.h /usr/include
安装fping-2.4b2_to
wget http://fping.sourceforge.net/download/fping.tar.gz
tar zxvf fping.tar.gz
cd fping-2.4b2_to
./configure
make
make check
make install
安装echoping
wget http://jaist.dl.sourceforge.net/project/echoping/echoping/6.0.0/echoping-6.0.0.tar.gz
tar zxvf echoping-6.0.0.tar.gz
cd echoping-6.0.0
./configure --without-libidn
make
make test#遇到测试不成功等信息也没关系,直接ctrl+c回到命令行
make install
安装FCGI
wget http://cpan.communilink.net/authors/id/F/FL/FLORA/FCGI-0.74.tar.gz
tar zxvf FCGI-0.74.tar.gz
cd FCGI-0.74
perl Makefile.PL
make && make install
安装mod_fastcgi,dso方式
wget http://www.fastcgi.com/dist/mod_fastcgi-2.4.6.tar.gz
tar zxvf mod_fastcgi-2.4.6.tar.gz
cd mod_fastcgi-2.4.6
apxs -o mod_fastcgi.so -c *.c
apxs -i -a -n fastcgi .libs/mod_fastcgi.so
修改apache配置文件,确认有如下一行,没有则添加
LoadModule fastcgi_module modules/mod_fastcgi.so
安装SMokePing
wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz
tar zxvf smokeping-2.6.8.tar.gz
./configure --prefix=/usr/local/smokeping
在这里会得到类似如下错误提示,需要安装perl一些依赖包
checking checking for perl module 'RRDs'... Failed
checking checking for perl module 'FCGI'... Ok
checking checking for perl module 'CGI'... Ok
checking checking for perl module 'CGI::Fast'... Ok
checking checking for perl module 'Config::Grammar'... Failed
checking checking for perl module 'Digest::HMAC_MD5'... Failed
checking checking for perl module 'LWP'... Ok
** Aborting Configure ******************************
If you know where perl can find the missing modules, set
the PERL5LIB environment variable accordingly.
FIRST though, make sure that 'perl' starts the perl
binary you want to use for SmokePing.
Now you can install local copies of the missing modules
by running
./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty
The RRDs perl module is part of RRDtool. Either use the rrdtool
package provided by your OS or install rrdtool from source.
If you install from source, the RRDs module is located
PREFIX/lib/perl
先解决”checking checking for perl module ‘RRDs’… Failed”的问题,由于我们是编译安装的rrdtool,所以perl没找到默认路径下它的模块,需要手工拷贝过去
6.0 32位
cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/
cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/
6.5 64位
cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib64/perl5/
cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/RRDs.pm /usr/lib64/perl5/
CentOS5.9
cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/5.8.8/i386-linux-thread-multi/
cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/5.8.8/i386-linux-thread-multi/
下面的几个模块在错误提示中已经提到解决办法,运行以下指令就会自动下载安装了
./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty
装完之后,重新运行下面指令
./configure --prefix=/usr/local/smokeping
gmake install
配置smokeping
cd /usr/local/smokeping/
mkdir cache data var
chown apache.apache cache data var
cd /usr/local/smokeping/htdocs/
cp smokeping.fcgi.dist smokeping.fcgi
cd /usr/local/smokeping/etc/
cp config.dist config
chmod 400 /usr/local/smokeping/etc/smokeping_secrets.dist
ln -s /usr/local/smokeping/cache /usr/local/smokeping/htdocs/cache
修改/usr/local/smokeping/etc/config
vi /usr/local/smokeping/etc/config
找到binary = /usr/sbin/fping
修改为binary = /usr/local/sbin/fping
/usr/local/sbin/fping
修改/usr/local/smokeping/bin/smokeping
vi /usr/local/smokeping/bin/smokeping
找到：use lib qw(); # PERL5LIB
修改为：use lib qw(/usr/local/rrdtool/lib/perl); # PERL5LIB
修改主机配置文件，增加自己的主机，如果只想测试就把host改成自己要检测的IP就行了
+ Test
menu= Targets
#parents = owner:/Test/James location:/
++ James
menu = James
title =James
alerts = someloss
slaves = boomer slave2
host = james.address
++ MultiHost
menu = Multihost
title = James and James as seen from Boomer
host = /Test/James /Test/James~boomer
创建开机自动运行脚本
vi /etc/rc.local
写入如下内容
nohup /usr/local/smokeping/bin/smokeping --logfile=/var/log/smokeping.log 2>&1 &
修改apache配置文件
Alias /smokeping/ "/usr/local/smokeping/htdocs/"
AllowOverride None
Options All
AddHandler cgi-script .fcgi .cgi
Order allow,deny
Allow from all
DirectoryIndex smokeping.fcgi
最后重器apache服务，运行
nohup /usr/local/smokeping/bin/smokeping –logfile=/var/log/smokeping.log 2>&1 &
打开浏览器输入http://smokeping-ip/smokeping/即可访问
页:
[1]