线上在用的zabbix_agentd.conf文件
[*]# This is a config file for Zabbix Agent (Unix)
[*]# To get more information about Zabbix, visit http://www.zabbix.com
[*]
[*]############ GENERAL PARAMETERS #################
[*]
[*]### Option: PidFile
[*]# Name of PID file.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# PidFile=/tmp/zabbix_agentd.pid
[*]
[*]### Option: LogFile
[*]# Name of log file.
[*]# If not set, syslog is used.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# LogFileLogFile=
[*]
[*]LogFile=/tmp/zabbix_agentd.log
[*]
[*]### Option: LogFileSize
[*]# Maximum size of log file in MB.
[*]# 0 - disable automatic log rotation.
[*]#
[*]# Mandatory: no
[*]# Range: 0-1024
[*]# Default:
[*]# LogFileSize=1
[*]
[*]### Option: DebugLevel
[*]# Specifies debug level
[*]# 0 - no debug
[*]# 1 - critical information
[*]# 2 - error information
[*]# 3 - warnings
[*]# 4 - for debugging (produces lots of information)
[*]#
[*]# Mandatory: no
[*]# Range: 0-4
[*]# Default:
[*]# DebugLevel=3
[*]
[*]### Option: SourceIP
[*]# Source IP address for outgoing connections.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# SourceIP=
[*]
[*]### Option: EnableRemoteCommands
[*]# Whether remote commands from Zabbix server are allowed.
[*]# 0 - not allowed
[*]# 1 - allowed
[*]#
[*]# Mandatory: no
[*]# Default:
[*]EnableRemoteCommands=1
[*]
[*]### Option: LogRemoteCommands
[*]# Enable logging of executed shell commands as warnings.
[*]# 0 - disabled
[*]# 1 - enabled
[*]#
[*]# Mandatory: no
[*]# Default:
[*]LogRemoteCommands=1
[*]
[*]##### Passive checks related
[*]
[*]### Option: Server
[*]# List of comma delimited IP addresses (or hostnames) of Zabbix servers.
[*]# No spaces allowed. First entry is used for receiving list of and sending active checks.
[*]# If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally.
[*]#
[*]# Mandatory: yes
[*]# Default:
[*]# ServerServer=
[*]
[*]Server=192.168.1.1
[*]
[*]### Option: Hostname
[*]# Unique, case sensitive hostname.
[*]# Required for active checks and must match hostname as configured on the server.
[*]# Value is acquired from HostnameItem if undefined.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# HostnameHostname=
[*]
[*]Hostname=IP131
[*]
[*]### Option: HostnameItem
[*]# Item used for generating Hostname if it is undefined.
[*]# Ignored if Hostname is defined.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# HostnameItem=system.hostname
[*]
[*]### Option: ListenPort
[*]# Agent will listen on this port for connections from the server.
[*]#
[*]# Mandatory: no
[*]# Range: 1024-32767
[*]# Default:
[*]# ListenPort=10050
[*]
[*]### Option: ListenIP
[*]# List of comma delimited IP addresses that the agent should listen on.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# ListenIP=0.0.0.0
[*]
[*]### Option: DisablePassive
[*]# Disable passive checks. The agent will not listen on any TCP port.
[*]# Only active checks will be processed.
[*]# 0 - do not disable
[*]# 1 - disable
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# DisablePassive=0
[*]
[*]##### Active checks related
[*]
[*]### Option: DisableActive
[*]# Disable active checks. The agent will work in passive mode listening for server.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# DisableActive=0
[*]
[*]### Option: ServerPort
[*]# Server port for retrieving list of and sending active checks.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# ServerPort=10051
[*]
[*]### Option: RefreshActiveChecks
[*]# How often list of active checks is refreshed, in seconds.
[*]#
[*]# Mandatory: no
[*]# Range: 60-3600
[*]# Default:
[*]# RefreshActiveChecks=120
[*]
[*]### Option: BufferSend
[*]# Do not keep data longer than N seconds in buffer.
[*]#
[*]# Mandatory: no
[*]# Range: 1-3600
[*]# Default:
[*]# BufferSend=5
[*]
[*]### Option: BufferSize
[*]# Maximum number of values in a memory buffer. The agent will send
[*]# all collected data to Zabbix Server or Proxy if the buffer is full.
[*]#
[*]# Mandatory: no
[*]# Range: 2-65535
[*]# Default:
[*]# BufferSize=100
[*]
[*]### Option: MaxLinesPerSecond
[*]# Maximum number of new lines the agent will send per second to Zabbix Server
[*]# or Proxy processing 'log' and 'logrt' active checks.
[*]# The provided value will be overridden by the parameter 'maxlines',
[*]# provided in 'log' or 'logrt' item keys.
[*]#
[*]# Mandatory: no
[*]# Range: 1-1000
[*]# Default:
[*]# MaxLinesPerSecond=100
[*]
[*]### Option: AllowRoot
[*]# Allow the agent to run as 'root'. If disabled and the agent is started by 'root', the agent
[*]# will try to switch to user 'zabbix' instead. Has no effect if started under a regular user.
[*]# 0 - do not allow
[*]# 1 - allow
[*]#
[*]# Mandatory: no
[*]# Default:
[*]AllowRoot=1
[*]
[*]############ ADVANCED PARAMETERS #################
[*]
[*]### Option: Alias
[*]# Sets an alias for parameter. It can be useful to substitute long and complex parameter name with a smaller and simpler one.
[*]#
[*]# Mandatory: no
[*]# Range:
[*]# Default:
[*]
[*]### Option: StartAgents
[*]# Number of pre-forked instances of zabbix_agentd that process passive checks.
[*]#
[*]# Mandatory: no
[*]# Range: 1-100
[*]# Default:
[*]# StartAgents=3
[*]
[*]### Option: Timeout
[*]# Spend no more than Timeout seconds on processing
[*]#
[*]# Mandatory: no
[*]# Range: 1-30
[*]# Default:
[*]Timeout=10
[*]
[*]### Option: Include
[*]# You may include individual files or all files in a directory in the configuration file.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# Include=
[*]
[*]# Include=/etc/zabbix/zabbix_agentd.userparams.conf
[*]# Include=/etc/zabbix/zabbix_agentd/
[*]
[*]####### USER-DEFINED MONITORED PARAMETERS #######
[*]
[*]### Option: UnsafeUserParameters
[*]# Allow all characters to be passed in arguments to user-defined parameters.
[*]# 0 - do not allow
[*]# 1 - allow
[*]#
[*]# Mandatory: no
[*]# Range: 0-1
[*]# Default:
[*]#UnsafeUserParameters=0
[*]
[*]### Option: UserParameter
[*]# User-defined parameter to monitor. There can be several user-defined parameters.
[*]# Format: UserParameter=,
[*]# Note that shell command must not return empty string or EOL only.
[*]# See 'zabbix_agentd' directory for examples.
[*]#
[*]# Mandatory: no
[*]# Default:
[*]# UserParameter=
[*]
[*]#used for monitor disk io
[*]UserParameter=custom.vfs.dev.read.ops
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$4}'
[*]UserParameter=custom.vfs.dev.read.ms
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$7}'
[*]UserParameter=custom.vfs.dev.write.ops
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$8}'
[*]UserParameter=custom.vfs.dev.write.ms
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$11}'
[*]UserParameter=custom.vfs.dev.io.active
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$12}'
[*]UserParameter=custom.vfs.dev.io.ms
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$13}'
[*]UserParameter=custom.vfs.dev.read.sectors
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$6}'
[*]UserParameter=custom.vfs.dev.write.sectors
[*],cat /proc/diskstats | grep $1 | head -1 | awk '{print $$10}'
[*]
[*]#used for monitor iptables iptstat
[*]UserParameter=iptstate.tcp,/etc/zabbix/scripts/net-tcp
[*]UserParameter=iptstate.tcp.syn,/etc/zabbix/scripts/net-syn
[*]UserParameter=iptstate.tcp.timewait,/etc/zabbix/scripts/net-time-wait
[*]UserParameter=iptstate.tcp.established,/etc/zabbix/scripts/net-established
[*]UserParameter=iptstate.tcp.close,/etc/zabbix/scripts/net-close
[*]UserParameter=iptstate.udp,/etc/zabbix/scripts/net-udp
[*]UserParameter=iptstate.icmp,/etc/zabbix/scripts/net-icmp
页:
[1]