zabbix进行数据库备份以及表分区的方法
zabbix进行数据库备份以及表分区的方法http://www.iyunv.net/article/73173.htm
这篇文章主要介绍了zabbix进行数据库备份以及表分区的方法,需要的朋友可以参考下
由于测试环境上面使用的zabbix服务器配置比较低，经常会遇到性能瓶颈（主要是数据库和磁盘I/O等），于是倒逼我使用了一些方式来缓解这些问题。
主要是以前使用的那个备份数据库的脚本是对zabbix数据库进行全备的，使用的又是mysql自带的工具mysqldump，当数据量大了之后进行全备所花的时间比较长，这样将会造成数据库的锁读。。。从而使zabbix服务以为mysql死掉了，产生一大堆的报警。
后来发现原来造成数据库数据量大量增加的是zabbix数据库中的一些存储数据的大表导致的。于是备份数据库的时候可以选择跳过这些表进行备份，这样，将大大减少数据库备份所花的时间（PS：之前备份数据库所花时间在十分钟左右，现在跳过大表备份，所花时间在1S左右就能备份完，大大缩短了备份数据库时间）。
下面就贴出某位大神写的专门为zabbix数据库做备份以及恢复的脚本：
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081#!/bin/bash#author: itnihaored='\e || mkdir ${MySQL_DUMP_PATH} cd ${MySQL_DUMP_PATH} [ -d logs ] || mkdir logs [ -d ${DATE} ] || mkdir ${DATE} cd ${DATE} #TABLE_NAME_ALL=$(${MYSQL_BIN_PATH} -u${MySQL_USER} -p${MySQL_PASSWORD}-h${MySQL_HOST} ${MySQL_DATABASE_NAME} -e "show tables"|egrep -v "(Tables_in_zabbix)") TABLE_NAME_ALL=$(${MYSQL_BIN_PATH} -u${MySQL_USER} -p${MySQL_PASSWORD}-h${MySQL_HOST} ${MySQL_DATABASE_NAME} -e "show tables"|egrep -v "(Tables_in_zabbix|history*|trends*|acknowledges|alerts|auditlog|events|service_alarms)") for TABLE_NAME in ${TABLE_NAME_ALL} do ${MYSQL_DUMP_BIN_PATH} --opt -u${MySQL_USER} -p${MySQL_PASSWORD} -P${MySQL_PORT} -h${MySQL_HOST} ${MySQL_DATABASE_NAME} ${TABLE_NAME} >${TABLE_NAME}.sql sleep 0.01 done [ "$?" == 0 ] && echo "${DATE}: Backup zabbix succeed" >> ${MySQL_DUMP_PATH}/logs/ZabbixMysqlDump.log [ "$?" != 0 ] && echo "${DATE}: Backup zabbix not succeed" >> ${MySQL_DUMP_PATH}/logs/ZabbixMysqlDump.log cd ${MySQL_DUMP_PATH}/ rm -rf $(date +%Y%m%d --date='5 days ago') exit 0}MySQLImport () { cd ${MySQL_DUMP_PATH} DATE=$(ls${MySQL_DUMP_PATH} |egrep "\b^+$\b") echo -e "${green}${DATE}" echo -e "${blue}what DATE do you want to import,please input date:${NC}" read SELECT_DATE if [ -d "${SELECT_DATE}" ];then echo -e "you select is ${green}${SELECT_DATE}${NC}, do you want to contine,if,input ${red}(yes|y|Y)${NC},else then exit" read Input [[ 'yes|y|Y' =~ "${Input}" ]] status="$?" if [ "${status}" == "0"];then echo "now import SQL....... Please wait......." else exit 1 fi cd ${SELECT_DATE} for PER_TABEL_SQL in $(ls *.sql) do ${MYSQL_BIN_PATH} -u${MySQL_USER} -p${MySQL_PASSWORD}-h${MySQL_HOST} ${MySQL_DATABASE_NAME} < ${PER_TABEL_SQL} echo -e "import ${PER_TABEL_SQL} ${PURPLE}........................${NC}" done echo "Finish import SQL,Please check Zabbix database" else echo "Don't exist ${SELECT_DATE} DIR" fi}case "$1" inMySQLDUMP|mysqldump) MySQLDUMP ;;MySQLImport|mysqlimport) MySQLImport ;;*) echo "Usage: $0 {(MySQLDUMP|mysqldump) (MySQLImport|mysqlimport)}" ;;esac 该脚本源出处在这https://github.com/itnihao/zabbix-book/blob/master/03-chapter/Zabbix_MySQLdump_per_table_v2.sh
我这是在大神的脚本上做了修改之后形成的适合我自己备份的脚本，各位也可以自行修改成适合自己的备份脚本。这个脚本实现的效果上面已经说了，之前做全备的时候差不多有4G左右的数据量，现在只备份配置文件数据量只有不到10M，果断大大节省时间以及空间呀。
不过这样的话将无法保证数据的备份，我目前考虑使用xtradbbackup对数据进行增量备份，目前还未实现，留待过两天做吧。
好了，关于数据库备份的事情搞了，然后还需要对大数据量的表进行表分区，参考了zabbix官网的一篇文章https://www.zabbix.org/wiki/Docs/howto/mysql_partition 各位有兴趣的话可以去看看，我这里将其总结在了一起，更加方便一点。
表分区可以对大数据量的表进行物理上的拆分成多个文件，但是逻辑上来看，还是一张表，对应用程序是透明的。另外，将这一张大表拆分成很多小表的话将使得数据查询速度能够更快。还可以随时删除旧的数据分区，删除过期数据。这种方式适用于大数据量的表，但是查询量比较少的应用场景。如果是大数据量的表，又有大量查询的话建议还是进行分库分表操作。
好了，不多扯了，开始作业了。
首先，登录数据库(PS:这个就不演示了)
然后登陆到zabbix库中修改两张表的结构：
123use zabbix;Alter table history_text drop primary key, add index (id), drop index history_text_2, add index history_text_2 (itemid, id);Alter table history_log drop primary key, add index (id), drop index history_log_2, add index history_log_2 (itemid, id); 修改完之后再按照官网上的过程创建四个存储过程：
12345678910111213141516171819202122232425262728293031DELIMITER $$CREATE PROCEDURE `partition_create`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), PARTITIONNAME VARCHAR(64), CLOCK INT)BEGIN /* SCHEMANAME = The DB schema in which to make changes TABLENAME = The table with partitions to potentially delete PARTITIONNAME = The name of the partition to create */ /* Verify that the partition does not already exist */ DECLARE RETROWS INT; SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_description >= CLOCK; IF RETROWS = 0 THEN /* 1. Print a message indicating that a partition was created. 2. Create the SQL to create the partition. 3. Execute the SQL from #2. */ SELECT CONCAT( "partition_create(", SCHEMANAME, ",", TABLENAME, ",", PARTITIONNAME, ",", CLOCK, ")" ) AS msg; SET @SQL = CONCAT( 'ALTER TABLE ', SCHEMANAME, '.', TABLENAME, ' ADD PARTITION (PARTITION ', PARTITIONNAME, ' VALUES LESS THAN (', CLOCK, '));' ); PREPARE STMT FROM @SQL; EXECUTE STMT; DEALLOCATE PREPARE STMT; END IF;END$$DELIMITER ;1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162DELIMITER $$CREATE PROCEDURE `partition_drop`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), DELETE_BELOW_PARTITION_DATE BIGINT)BEGIN /* SCHEMANAME = The DB schema in which to make changes TABLENAME = The table with partitions to potentially delete DELETE_BELOW_PARTITION_DATE = Delete any partitions with names that are dates older than this one (yyyy-mm-dd) */ DECLARE done INT DEFAULT FALSE; DECLARE drop_part_name VARCHAR(16); /* Get a list of all the partitions that are older than the date in DELETE_BELOW_PARTITION_DATE.All partitions are prefixed with a "p", so use SUBSTRING TO get rid of that character. */ DECLARE myCursor CURSOR FOR SELECT partition_name FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND CAST(SUBSTRING(partition_name FROM 2) AS UNSIGNED) < DELETE_BELOW_PARTITION_DATE; DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE; /* Create the basics for when we need to drop the partition.Also, create @drop_partitions to hold a comma-delimited list of all partitions that should be deleted. */ SET @alter_header = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " DROP PARTITION "); SET @drop_partitions = ""; /* Start looping through all the partitions that are too old. */ OPEN myCursor; read_loop: LOOP FETCH myCursor INTO drop_part_name; IF done THEN LEAVE read_loop; END IF; SET @drop_partitions = IF(@drop_partitions = "", drop_part_name, CONCAT(@drop_partitions, ",", drop_part_name)); END LOOP; IF @drop_partitions != "" THEN /* 1. Build the SQL to drop all the necessary partitions. 2. Run the SQL to drop the partitions. 3. Print out the table partitions that were deleted. */ SET @full_sql = CONCAT(@alter_header, @drop_partitions, ";"); PREPARE STMT FROM @full_sql; EXECUTE STMT; DEALLOCATE PREPARE STMT; SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, @drop_partitions AS `partitions_deleted`; ELSE /* No partitions are being deleted, so print out "N/A" (Not applicable) to indicate that no changes were made. */ SELECT CONCAT(SCHEMANAME, ".", TABLENAME) AS `table`, "N/A" AS `partitions_deleted`; END IF;END$$DELIMITER ;12345678910111213141516171819202122232425262728DELIMITER $$CREATE PROCEDURE `partition_maintenance`(SCHEMA_NAME VARCHAR(32), TABLE_NAME VARCHAR(32), KEEP_DATA_DAYS INT, HOURLY_INTERVAL INT, CREATE_NEXT_INTERVALS INT)BEGIN DECLARE OLDER_THAN_PARTITION_DATE VARCHAR(16); DECLARE PARTITION_NAME VARCHAR(16); DECLARE LESS_THAN_TIMESTAMP INT; DECLARE CUR_TIME INT; CALL partition_verify(SCHEMA_NAME, TABLE_NAME, HOURLY_INTERVAL); SET CUR_TIME = UNIX_TIMESTAMP(DATE_FORMAT(NOW(), '%Y-%m-%d 00:00:00')); SET @__interval = 1; create_loop: LOOP IF @__interval > CREATE_NEXT_INTERVALS THEN LEAVE create_loop; END IF; SET LESS_THAN_TIMESTAMP = CUR_TIME + (HOURLY_INTERVAL * @__interval * 3600); SET PARTITION_NAME = FROM_UNIXTIME(CUR_TIME + HOURLY_INTERVAL * (@__interval - 1) * 3600, 'p%Y%m%d%H00'); CALL partition_create(SCHEMA_NAME, TABLE_NAME, PARTITION_NAME, LESS_THAN_TIMESTAMP); SET @__interval=@__interval+1; END LOOP; SET OLDER_THAN_PARTITION_DATE=DATE_FORMAT(DATE_SUB(NOW(), INTERVAL KEEP_DATA_DAYS DAY), '%Y%m%d0000'); CALL partition_drop(SCHEMA_NAME, TABLE_NAME, OLDER_THAN_PARTITION_DATE);END$$DELIMITER ;1234567891011121314151617181920212223242526272829303132333435363738DELIMITER $$CREATE PROCEDURE `partition_verify`(SCHEMANAME VARCHAR(64), TABLENAME VARCHAR(64), HOURLYINTERVAL INT(11))BEGIN DECLARE PARTITION_NAME VARCHAR(16); DECLARE RETROWS INT(11); DECLARE FUTURE_TIMESTAMP TIMESTAMP; /* * Check if any partitions exist for the given SCHEMANAME.TABLENAME. */ SELECT COUNT(1) INTO RETROWS FROM information_schema.partitions WHERE table_schema = SCHEMANAME AND TABLE_NAME = TABLENAME AND partition_name IS NULL; /* * If partitions do not exist, go ahead and partition the table */ IF RETROWS = 1 THEN /* * Take the current date at 00:00:00 and add HOURLYINTERVAL to it.This is the timestamp below which we will store values. * We begin partitioning based on the beginning of a day.This is because we don't want to generate a random partition * that won't necessarily fall in line with the desired partition naming (ie: if the hour interval is 24 hours, we could * end up creating a partition now named "p201403270600" when all other partitions will be like "p201403280000"). */ SET FUTURE_TIMESTAMP = TIMESTAMPADD(HOUR, HOURLYINTERVAL, CONCAT(CURDATE(), " ", '00:00:00')); SET PARTITION_NAME = DATE_FORMAT(CURDATE(), 'p%Y%m%d%H00'); -- Create the partitioning query SET @__PARTITION_SQL = CONCAT("ALTER TABLE ", SCHEMANAME, ".", TABLENAME, " PARTITION BY RANGE(`clock`)"); SET @__PARTITION_SQL = CONCAT(@__PARTITION_SQL, "(PARTITION ", PARTITION_NAME, " VALUES LESS THAN (", UNIX_TIMESTAMP(FUTURE_TIMESTAMP), "));"); -- Run the partitioning query PREPARE STMT FROM @__PARTITION_SQL; EXECUTE STMT; DEALLOCATE PREPARE STMT; END IF;END$$DELIMITER ; 上面四个存储过程执行后将可以使用
1CALL partition_maintenance('', '', , , ) 命令对想要分区的表进行表分区了。其中的参数我这里解释一下。
这是举例：
1CALL partition_maintenance(zabbix, 'history_uint', 31, 24, 14); zabbix_db_name：库名
table_name：表名
days_to_keep_data：保存多少天的数据
hourly_interval：每隔多久生成一个分区
num_future_intervals_to_create：本次一共生成多少个分区
这个例子就是history_uint表最多保存31天的数据，每隔24小时生成一个分区，这次一共生成14个分区
这里可以将上面四个存储过程保存为一个文件，导入到数据库中，文件我稍后将会放在附件中，这里使用的命令是：mysql -uzabbix -pzabbix zabbix
页:
[1]