openstack运维实战系列(十六)之ceph存储安装
1.前言企业上线openstack，必须要思考和解决三方面的难题:1.控制集群的高可用和负载均衡，保障集群没有单点故障，持续可用，2.网络的规划和neutron L3的高可用和负载均衡，3. 存储的高可用性和性能问题。存储openstack中的痛点与难点之一，在上线和运维中，值得考虑和规划的重要点，openstack支持各种存储，包括分布式的文件系统，常见的有:ceph,glusterfs和sheepdog，同时也支持商业的FC存储，如IBM,EMC,NetApp和huawei的专业存储设备，一方面能够满足企业的利旧和资源的统一管理。
2. ceph概述
ceph作为近年来呼声最高的统一存储，在云环境下适应而生，ceph成就了openstack和cloudstack这类的开源的平台方案，同时openstack的快速发展，也吸引了越来越多的人参与到ceph的研究中来，在过去的2015年中，ceph在整个社区的活跃度越来越高，越来越多的企业，使用ceph做为openstack的glance，nova，cinder的存储。
ceph是一种统一的分布式文件系统，能够支持三种常用的接口:1.对象存储接口，兼容于S3，用于存储结构化的数据，如图片，视频，音频等文件，其他对象存储有:S3,Swift,FastDFS等；2. 文件系统接口，通过cephfs来完成，能够实现类似于nfs的挂载文件系统，需要由MDS来完成，类似的文件系存储有:nfs,samba,glusterfs等；3. 块存储，通过rbd实现，专门用于存储云环境下块设备，如openstack的cinder卷存储，这也是目前ceph应用最广泛的地方。
ceph的体系结构：
3.ceph的安装
[*] 环境介绍，通过ceph-depoly的方式部署ceph，三台角色如下,按照需求配置好hostname并格式化磁盘为xfs并挂载
ip主机名角色磁盘10.1.2.230controller_10_1_2_230Monitor/admin-deploy
10.1.2.231network_10_1_2_231OSD/data1/osd0,格式化为xfs10.1.2.232compute1_10_1_2_232OSD/data1/osd1,格式化为xfs
2.yum源的准备，需要配置好Epel源和ceph源
vim /etc/yum.repos.d/ceph.repo
name=Ceph noarch packages
baseurl=http://download.ceph.com/rpm-{ceph-release}/{distro}/noarch
enabled=1
gpgcheck=1
type=rpm-md
gpgkey=https://download.ceph.com/keys/release.asc# yum repolist
Loaded plugins: fastestmirror, priorities
Repository epel is listed more than once in the configuration
Repository epel-debuginfo is listed more than once in the configuration
Repository epel-source is listed more than once in the configuration
Determining fastest mirrors
base | 3.7 kB 00:00
base/primary_db | 4.4 MB 00:01
ceph | 2.9 kB 00:00
ceph/primary_db |24 kB 00:00
epel | 4.4 kB 00:00
epel/primary_db | 6.3 MB 00:00
extras | 3.3 kB 00:00
extras/primary_db |19 kB 00:00
openstack-icehouse | 2.9 kB 00:00
openstack-icehouse/primary_db | 902 kB 00:00
updates | 3.4 kB 00:00
updates/primary_db | 5.3 MB 00:00
211 packages excluded due to repository priority protections
repo id repo name status
base CentOS-6 - Base 6,311+56
ceph ceph 21+1
epel Extra Packages for Enterprise Linux 6 - x86_64 11,112+36
extras CentOS-6 - Extras 15
openstack-icehouse OpenStack Icehouse Repository 1,353+309
updates CentOS-6 - Updates 1,397+118
repolist: 20,209
3.配置ntp，所有的机器均需要配置ntp服务器，统一同步到内网的ntp服务器，参考:
# vim /etc/ntp.conf
server 10.1.2.230
# /etc/init.d/ntpd restart
Shutting down ntpd:
Starting ntpd:
# chkconfig ntpd on
# chkconfig --list ntpd
ntpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
4.安装ceph，在所有的节点上都需要安装ceph，在admin节点，需要安装另外一个ceph-deploy，用于软件部署
# yum install ceph ceph-deploy#管理节点
# yum install ceph -y #OSD节点
# yum install ceph -y #OSD节点 5.生成SSH key秘钥，并拷贝至远端
a、生成key
# ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
75:b4:24:cd:24:a6:a4:a4:a5:c7:da:6f:e7:29:ce:0f root@controller_10_1_2_230
The key's randomart image is:
+--[ RSA 2048]----+
| o . +++ |
| * o o =o. |
| o + . . o |
| + . . |
| . . S |
| . |
| E . |
| o.+ . |
| .oo+ |
+-----------------+
b、将key拷贝至远端
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@controller_10_1_2_230
The authenticity of host ':32200 (:32200)' can't be established.
RSA key fingerprint is 7c:6b:e6:d5:b9:cc:09:d2:b7:bb:db:a4:41:aa:5e:34.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ':32200,:32200' (RSA) to the list of known hosts.
root@controller_10_1_2_230's password:
Now try logging into the machine, with "ssh 'root@controller_10_1_2_230'", and check in:
.ssh/authorized_keys
to make sure we haven't added extra keys that you weren't expecting.
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@network_10_1_2_231
The authenticity of host ':32200 (:32200)' can't be established.
RSA key fingerprint is de:27:84:74:d3:9c:cf:d5:d8:3e:c4:65:d5:9d:dc:9a.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ':32200,:32200' (RSA) to the list of known hosts.
root@network_10_1_2_231's password:
Now try logging into the machine, with "ssh 'root@network_10_1_2_231'", and check in:
.ssh/authorized_keys
to make sure we haven't added extra keys that you weren't expecting.
# ssh-copy-id -i /root/.ssh/id_rsa.pub root@compute1_10_1_2_232
The authenticity of host ':32200 (:32200)' can't be established.
RSA key fingerprint is d7:3a:1a:3d:b5:26:78:6a:39:5e:bd:5d:d4:96:29:0f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added ':32200,:32200' (RSA) to the list of known hosts.
root@compute1_10_1_2_232's password:
Now try logging into the machine, with "ssh 'root@compute1_10_1_2_232'", and check in:
.ssh/authorized_keys
to make sure we haven't added extra keys that you weren't expecting.
c、测试是否能无密码登陆
# ssh root@compute1_10_1_2_232 'df -h'
Filesystem SizeUsed Avail Use% Mounted on
/dev/sda2 9.9G3.3G6.1G35% /
tmpfs 3.9G8.0K3.9G 1% /dev/shm
/dev/sda1 1008M 82M876M 9% /boot
/dev/sda4 913G 33M913G 1% /data1 6.创建初始Monitor节点
a、创建配置目录，后续所有的操作都在该目录下执行
# mkdir ceph-deploy
# cd ceph-deploy/
b、新建一个集群
# ceph-deploy new--cluster-network 10.1.2.0/24--public-network 10.1.2.0/24 controller_10_1_2_230
found configuration file at: /root/.cephdeploy.conf
Invoked (1.5.19): /usr/bin/ceph-deploy new --cluster-network 10.1.2.0/24 --public-network 10.1.2.0/24 controller_10_1_2_230
Creating new cluster named ceph
making sure passwordless SSH succeeds
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
find the location of an executable
Running command: /sbin/ip link show
Running command: /sbin/ip addr show
IP addresses found: ['10.1.2.230']
Resolving host controller_10_1_2_230
Monitor controller_10_1_2_230 at 10.1.2.230
Monitor initial members are ['controller_10_1_2_230']
Monitor addrs are ['10.1.2.230']
Creating a random mon key...
Writing monitor keyring to ceph.mon.keyring...
Writing initial config to ceph.conf...
Error in sys.exitfunc:
c、修改副本的个数
# vim ceph.conf
auth_service_required = cephx
filestore_xattr_use_omap = true
auth_client_required = cephx
auth_cluster_required = cephx #开启ceph认证
mon_host = 10.1.2.230 #monitor的ip地址
public_network = 10.1.2.0/24 #ceph共有网络，即访问的网络
mon_initial_members = controller_10_1_2_230 #初始的monitor，建议是奇数，防止脑裂
cluster_network = 10.1.2.0/24 #ceph集群内网
fsid = 07462638-a00f-476f-8257-3f4c9ec12d6e #fsid号码
osd pool default size = 2 #replicate的个数
d、monitor初始化
# ceph-deploy mon create-initial
found configuration file at: /root/.cephdeploy.conf
Invoked (1.5.19): /usr/bin/ceph-deploy mon create-initial
Deploying mon, cluster ceph hosts controller_10_1_2_230
detecting platform for host controller_10_1_2_230 ...
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
distro info: CentOS 6.5 Final
determining if provided host has same hostname in remote
get remote short hostname
deploying mon to controller_10_1_2_230
get remote short hostname
remote hostname: controller_10_1_2_230
write cluster configuration to /etc/ceph/{cluster}.conf
create the mon path if it does not exist
checking for done path: /var/lib/ceph/mon/ceph-controller_10_1_2_230/done
done path does not exist: /var/lib/ceph/mon/ceph-controller_10_1_2_230/done
creating keyring file: /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
create the monitor keyring file
Running command: ceph-mon --cluster ceph --mkfs -i controller_10_1_2_230 --keyring /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
ceph-mon: renaming mon.noname-a 10.1.2.230:6789/0 to mon.controller_10_1_2_230
ceph-mon: set fsid to 07462638-a00f-476f-8257-3f4c9ec12d6e
ceph-mon: created monfs at /var/lib/ceph/mon/ceph-controller_10_1_2_230 for mon.controller_10_1_2_230
unlinking keyring file /var/lib/ceph/tmp/ceph-controller_10_1_2_230.mon.keyring
create a done file to avoid re-doing the mon deployment
create the init path if it does not exist
locating the `service` executable...
Running command: /sbin/service ceph -c /etc/ceph/ceph.conf start mon.controller_10_1_2_230
=== mon.controller_10_1_2_230 ===
Starting Ceph mon.controller_10_1_2_230 on controller_10_1_2_230...
Starting ceph-create-keys on controller_10_1_2_230...
Running command: chkconfig ceph on
Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
********************************************************************************
status for monitor: mon.controller_10_1_2_230
{
"election_epoch": 2,
"extra_probe_peers": [],
"monmap": {
"created": "0.000000",
"epoch": 1,
"fsid": "07462638-a00f-476f-8257-3f4c9ec12d6e",
"modified": "0.000000",
"mons": [
{
"addr": "10.1.2.230:6789/0",
"name": "controller_10_1_2_230",
"rank": 0
}
]
},
"name": "controller_10_1_2_230",
"outside_quorum": [],
"quorum": [
0
],
"rank": 0,
"state": "leader",
"sync_provider": []
}
********************************************************************************
monitor: mon.controller_10_1_2_230 is running
Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
processing monitor mon.controller_10_1_2_230
connected to host: controller_10_1_2_230
Running command: ceph --cluster=ceph --admin-daemon /var/run/ceph/ceph-mon.controller_10_1_2_230.asok mon_status
mon.controller_10_1_2_230 monitor has reached quorum!
all initial monitors are running and have formed quorum
Running gatherkeys...
Checking controller_10_1_2_230 for /etc/ceph/ceph.client.admin.keyring
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
fetch remote file
Got ceph.client.admin.keyring key from controller_10_1_2_230.
Have ceph.mon.keyring
Checking controller_10_1_2_230 for /var/lib/ceph/bootstrap-osd/ceph.keyring
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
fetch remote file
Got ceph.bootstrap-osd.keyring key from controller_10_1_2_230.
Checking controller_10_1_2_230 for /var/lib/ceph/bootstrap-mds/ceph.keyring
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
fetch remote file
Got ceph.bootstrap-mds.keyring key from controller_10_1_2_230.
Error in sys.exitfunc:
e、校验ceph状态
# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_ERR 64 pgs stuck inactive; 64 pgs stuck unclean; no osds
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230
osdmap e1: 0 osds: 0 up, 0 in
pgmap v2: 64 pgs, 1 pools, 0 bytes data, 0 objects
0 kB used, 0 kB / 0 kB avail
64 creating
PS:由于目前还没有OSD，所有集群目前的health健康状态为:HEALTH_ERR,添加之后，就不会报错了@@ 7.添加OSD，按照准备条件，先格式化为xfs文件系统并挂载
a、创建目录
# ssh root@network_10_1_2_231 'mkdir -pv /data1/osd0'
mkdir: created directory `/data1/osd0'
# ssh compute1_10_1_2_232 'mkdir -pv /data1/osd1'
mkdir: created directory `/data1/osd1'
b、OSD准备
# ceph-deploy osd prepare network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
found configuration file at: /root/.cephdeploy.conf
Invoked (1.5.19): /usr/bin/ceph-deploy osd prepare network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
Preparing cluster ceph disks network_10_1_2_231:/data1/osd0: compute1_10_1_2_232:/data1/osd1:
connected to host: network_10_1_2_231
detect platform information from remote host
detect machine type
Distro info: CentOS 6.5 Final
Deploying osd to network_10_1_2_231
write cluster configuration to /etc/ceph/{cluster}.conf
osd keyring does not exist yet, creating one
create a keyring file
Running command: udevadm trigger --subsystem-match=block --action=add
Preparing host network_10_1_2_231 disk /data1/osd0 journal None activate False
Running command: ceph-disk -v prepare --fs-type xfs --cluster ceph -- /data1/osd0
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mkfs_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mkfs_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mount_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mount_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=osd_journal_size
DEBUG:ceph-disk:Preparing osd data dir /data1/osd0
checking OSD status...
Running command: ceph --cluster=ceph osd stat --format=json
Host network_10_1_2_231 is now ready for osd use.
connected to host: compute1_10_1_2_232
detect platform information from remote host
detect machine type
Distro info: CentOS 6.5 Final
Deploying osd to compute1_10_1_2_232
write cluster configuration to /etc/ceph/{cluster}.conf
osd keyring does not exist yet, creating one
create a keyring file
Running command: udevadm trigger --subsystem-match=block --action=add
Preparing host compute1_10_1_2_232 disk /data1/osd1 journal None activate False
Running command: ceph-disk -v prepare --fs-type xfs --cluster ceph -- /data1/osd1
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mkfs_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mkfs_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_mount_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-conf --cluster=ceph --name=osd. --lookup osd_fs_mount_options_xfs
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=osd_journal_size
DEBUG:ceph-disk:Preparing osd data dir /data1/osd1
checking OSD status...
Running command: ceph --cluster=ceph osd stat --format=json
Host compute1_10_1_2_232 is now ready for osd use.
Error in sys.exitfunc:
c、激活OSD
# ceph-deploy osd activate network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
found configuration file at: /root/.cephdeploy.conf
Invoked (1.5.19): /usr/bin/ceph-deploy osd activate network_10_1_2_231:/data1/osd0 compute1_10_1_2_232:/data1/osd1
Activating cluster ceph disks network_10_1_2_231:/data1/osd0: compute1_10_1_2_232:/data1/osd1:
connected to host: network_10_1_2_231
detect platform information from remote host
detect machine type
Distro info: CentOS 6.5 Final
activating host network_10_1_2_231 disk /data1/osd0
will use init type: sysvinit
Running command: ceph-disk -v activate --mark-init sysvinit --mount /data1/osd0
=== osd.0 ===
Starting Ceph osd.0 on network_10_1_2_231...
starting osd.0 at :/0 osd_data /var/lib/ceph/osd/ceph-0 /var/lib/ceph/osd/ceph-0/journal
DEBUG:ceph-disk:Cluster uuid is 07462638-a00f-476f-8257-3f4c9ec12d6e
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
DEBUG:ceph-disk:Cluster name is ceph
DEBUG:ceph-disk:OSD uuid is 6d298aa5-b33b-4d93-8ac4-efaa671200e5
DEBUG:ceph-disk:Allocating OSD id...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring osd create --concise 6d298aa5-b33b-4d93-8ac4-efaa671200e5
DEBUG:ceph-disk:OSD id is 0
DEBUG:ceph-disk:Initializing OSD...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /data1/osd0/activate.monmap
got monmap epoch 1
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster ceph --mkfs --mkkey -i 0 --monmap /data1/osd0/activate.monmap --osd-data /data1/osd0 --osd-journal /data1/osd0/journal --osd-uuid 6d298aa5-b33b-4d93-8ac4-efaa671200e5 --keyring /data1/osd0/keyring
2016-01-28 15:48:59.836760 7f2ec01337a0 -1 journal FileJournal::_open: disabling aio for non-block journal.Use journal_force_aio to force use of aio anyway
2016-01-28 15:49:00.053509 7f2ec01337a0 -1 journal FileJournal::_open: disabling aio for non-block journal.Use journal_force_aio to force use of aio anyway
2016-01-28 15:49:00.053971 7f2ec01337a0 -1 filestore(/data1/osd0) could not find 23c2fcde/osd_superblock/0//-1 in index: (2) No such file or directory
2016-01-28 15:49:00.262211 7f2ec01337a0 -1 created object store /data1/osd0 journal /data1/osd0/journal for osd.0 fsid 07462638-a00f-476f-8257-3f4c9ec12d6e
2016-01-28 15:49:00.262234 7f2ec01337a0 -1 auth: error reading file: /data1/osd0/keyring: can't open /data1/osd0/keyring: (2) No such file or directory
2016-01-28 15:49:00.262280 7f2ec01337a0 -1 created new key in keyring /data1/osd0/keyring
DEBUG:ceph-disk:Marking with init system sysvinit
DEBUG:ceph-disk:Authorizing OSD key...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring auth add osd.0 -i /data1/osd0/keyring osd allow * mon allow profile osd
added key for osd.0
DEBUG:ceph-disk:ceph osd.0 data dir is ready at /data1/osd0
DEBUG:ceph-disk:Creating symlink /var/lib/ceph/osd/ceph-0 -> /data1/osd0
DEBUG:ceph-disk:Starting ceph osd.0...
INFO:ceph-disk:Running command: /sbin/service ceph start osd.0
create-or-move updating item name 'osd.0' weight 0.89 at location {host=network_10_1_2_231,root=default} to crush map
checking OSD status...
Running command: ceph --cluster=ceph osd stat --format=json
Running command: chkconfig ceph on
connected to host: compute1_10_1_2_232
detect platform information from remote host
detect machine type
Distro info: CentOS 6.5 Final
activating host compute1_10_1_2_232 disk /data1/osd1
will use init type: sysvinit
Running command: ceph-disk -v activate --mark-init sysvinit --mount /data1/osd1
=== osd.1 ===
Starting Ceph osd.1 on compute1_10_1_2_232...
starting osd.1 at :/0 osd_data /var/lib/ceph/osd/ceph-1 /var/lib/ceph/osd/ceph-1/journal
DEBUG:ceph-disk:Cluster uuid is 07462638-a00f-476f-8257-3f4c9ec12d6e
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster=ceph --show-config-value=fsid
DEBUG:ceph-disk:Cluster name is ceph
DEBUG:ceph-disk:OSD uuid is 770582a6-e408-4fb8-b59b-8b781d5e226b
DEBUG:ceph-disk:Allocating OSD id...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring osd create --concise 770582a6-e408-4fb8-b59b-8b781d5e226b
DEBUG:ceph-disk:OSD id is 1
DEBUG:ceph-disk:Initializing OSD...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring mon getmap -o /data1/osd1/activate.monmap
got monmap epoch 1
INFO:ceph-disk:Running command: /usr/bin/ceph-osd --cluster ceph --mkfs --mkkey -i 1 --monmap /data1/osd1/activate.monmap --osd-data /data1/osd1 --osd-journal /data1/osd1/journal --osd-uuid 770582a6-e408-4fb8-b59b-8b781d5e226b --keyring /data1/osd1/keyring
2016-01-28 15:49:08.734889 7fad7e2a3800 -1 journal FileJournal::_open: disabling aio for non-block journal.Use journal_force_aio to force use of aio anyway
2016-01-28 15:49:08.976634 7fad7e2a3800 -1 journal FileJournal::_open: disabling aio for non-block journal.Use journal_force_aio to force use of aio anyway
2016-01-28 15:49:08.976965 7fad7e2a3800 -1 filestore(/data1/osd1) could not find 23c2fcde/osd_superblock/0//-1 in index: (2) No such file or directory
2016-01-28 15:49:09.285254 7fad7e2a3800 -1 created object store /data1/osd1 journal /data1/osd1/journal for osd.1 fsid 07462638-a00f-476f-8257-3f4c9ec12d6e
2016-01-28 15:49:09.285287 7fad7e2a3800 -1 auth: error reading file: /data1/osd1/keyring: can't open /data1/osd1/keyring: (2) No such file or directory
2016-01-28 15:49:09.285358 7fad7e2a3800 -1 created new key in keyring /data1/osd1/keyring
DEBUG:ceph-disk:Marking with init system sysvinit
DEBUG:ceph-disk:Authorizing OSD key...
INFO:ceph-disk:Running command: /usr/bin/ceph --cluster ceph --name client.bootstrap-osd --keyring /var/lib/ceph/bootstrap-osd/ceph.keyring auth add osd.1 -i /data1/osd1/keyring osd allow * mon allow profile osd
added key for osd.1
DEBUG:ceph-disk:ceph osd.1 data dir is ready at /data1/osd1
DEBUG:ceph-disk:Creating symlink /var/lib/ceph/osd/ceph-1 -> /data1/osd1
DEBUG:ceph-disk:Starting ceph osd.1...
INFO:ceph-disk:Running command: /sbin/service ceph --cluster ceph start osd.1
libust: Warning: HOME environment variable not set. Disabling LTTng-UST per-user tracing. (in setup_local_apps() at lttng-ust-comm.c:305)
create-or-move updating item name 'osd.1' weight 0.89 at location {host=compute1_10_1_2_232,root=default} to crush map
libust: Warning: HOME environment variable not set. Disabling LTTng-UST per-user tracing. (in setup_local_apps() at lttng-ust-comm.c:305)
checking OSD status...
Running command: ceph --cluster=ceph osd stat --format=json
Running command: chkconfig ceph on
Error in sys.exitfunc:
d、再次校验ceph状态
# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_OK #状态为OK了
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230 #monitor信息
osdmap e8: 2 osds: 2 up, 2 in #osd信息，有2个OSD，2个状态都是up
pgmap v14: 64 pgs, 1 pools, 0 bytes data, 0 objects
10305 MB used, 1814 GB / 1824 GB avail
64 active+clean 8. 拷贝管理秘钥至其他节点
# ceph-deploy admin controller_10_1_2_230 network_10_1_2_231 compute1_10_1_2_232
found configuration file at: /root/.cephdeploy.conf
Invoked (1.5.19): /usr/bin/ceph-deploy admin controller_10_1_2_230 network_10_1_2_231 compute1_10_1_2_232
Pushing admin keys and conf to controller_10_1_2_230
connected to host: controller_10_1_2_230
detect platform information from remote host
detect machine type
get remote short hostname
write cluster configuration to /etc/ceph/{cluster}.conf
Pushing admin keys and conf to network_10_1_2_231
connected to host: network_10_1_2_231
detect platform information from remote host
detect machine type
get remote short hostname
write cluster configuration to /etc/ceph/{cluster}.conf
Pushing admin keys and conf to compute1_10_1_2_232
connected to host: compute1_10_1_2_232
detect platform information from remote host
detect machine type
get remote short hostname
write cluster configuration to /etc/ceph/{cluster}.conf
Error in sys.exitfunc:
其他节点也能够管理ceph集群
# ll /etc/ceph/ceph.client.admin.keyring
-rw-r--r-- 1 root root 63 Jan 28 15:52 /etc/ceph/ceph.client.admin.keyring
# ceph health
HEALTH_OK
# ceph -s
cluster 07462638-a00f-476f-8257-3f4c9ec12d6e
health HEALTH_OK
monmap e1: 1 mons at {controller_10_1_2_230=10.1.2.230:6789/0}, election epoch 2, quorum 0 controller_10_1_2_230
osdmap e8: 2 osds: 2 up, 2 in
pgmap v15: 64 pgs, 1 pools, 0 bytes data, 0 objects
10305 MB used, 1814 GB / 1824 GB avail
64 active+clean 至此，基本的ceph配置完毕！！！
4. 总结
以上配置是ceph的最基本的配置，此处只是作为练习使用，在生产中，实际用ceph，需要考虑的因素非常多，如monitor需要有3个，ceph的集群网络和公共网络的规划，OSD策略的调整等等，请继续关注我的blog，后续将会以ceph系列文章的形式出现，此处只是做简单的演示，接下来的博客，将介绍ceph和glance，nova，以及cinder结合，敬请关注！
5.参考链接
http://docs.ceph.com/docs/master/start/quick-ceph-deploy
页:
[1]