Redis双机热备方案--转
http://luyx30.blog.iyunv.com/1029851/1350832参考资料：
http://patrick-tang.blogspot.com/2012/06/redis-keepalived-failover-system.html
http://deidara.blog.iyunv.com/400447/302402
http://my.oschina.net/guol/blog/182491
http://shiguanghui.iteye.com/blog/2001499
背景
目前，Redis集群的官方方案还处在开发测试中，未集成到稳定版中。且目前官方开发中的Redis Cluster提供的功能尚不完善（可参考官方网站或http://www.redisdoc.com/en/latest/topic/cluster-spec.html），在生产环境中不推荐使用。通过调研发现市面上要实现采用单一的IP来访问，大多采用keepalived实现redis的双机热备作为过渡方案。
环境部署
环境介绍：
Master: 192.168.1.218 redis，keepalived
Slave: 192.168.1.219 redis，keepalived
Virtural IP Address (VIP):192.168.1.220
设计思路：
两个redis server主从备份。提供redis 服务高可用；两个keepalived 服务主从备份，提供VIP 服务的高可用。
1)每台redis server分别有主，从两个配置文件(redis_master.conf, redis_slave.conf)，通过启动脚本启动服务，启动脚本会检测这个redis集群中的其他服务器的角色，如果有master 服务存在，则以slave角色启动，否则将自己以master服务器启动；
2) keepalived 监控脚本，定时（频率：每秒一次）检测当前服务器是否获取集群VIP，如果获取集群VIP，则将本服务器上的redis服务器设置为master。同时将远端的其他redis服务器设置为slave；保证获取集群VIP的redis 服务器角色为master，其他的设置为slave。
3) keepalived 监控脚本，还会自动检测当前redis服务器是否正常，如果连续两次检测异常，则停掉本本机的keepalived服务，释放集群VIP，让去漂移到其他可以提供redis 服务的服务器上；
4)当 Master 与 Slave 均运作正常时, Master负责服务，Slave负责同步数据；当 Master 挂掉，Slave 正常时, Slave接管服务，同时关闭主从复制功能；当 Master 恢复正常，则从Slave同步数据，同步数据之后关闭主从复制功能，恢复Master身份，于此同时Slave等待Master同步数据完成之后，恢复Slave身份。然后依次循环。
实施步骤：
----创建专用用户
useradd -g develop redisadmin
echo Hisun@1125|passwd --stdin redisadmin
说明：以下部署过程都是在root(或具备sudo权限的账号)账户下进行。
----安装配置redis
1.下载redis源码
cd
wget http://download.redis.io/releases/redis-2.8.3.tar.gz
2.安装redis
tar -zxvf redis-2.8.3.tar.gz
cd redis-2.8.3
#reds的安装可以不用执行configure
make
#测试
make test
####在速度较慢的机器上执行make test可能出现下列错误，无影响
#*** : Test replication partial resync: no backlog in tests/integration/replication-psync.tcl
3.配置redis
#创建redis主目录
mkdir -p /usr/local/redis-2.8.3/{bin,conf,logs}
cp -a -R -p src/redis-server /usr/local/redis-2.8.3/bin/
cp -a -R -p src/redis-cli /usr/local/redis-2.8.3/bin/
cp -a -R -p src/redis-benchmark /usr/local/redis-2.8.3/bin/
cp -a -R -p src/redis-sentinel /usr/local/redis-2.8.3/bin/
cp -a -R -p src/redis-check-dump /usr/local/redis-2.8.3/bin/
cp -a -R -p src/redis-check-aof /usr/local/redis-2.8.3/bin/
#创建redis启动脚本
vi /usr/local/redis-2.8.3/redis-start.sh
####以下为master上的配置，slave上的配置只需要修改对应的LOCALIP和REMOTEIP即可。
#!/bin/bash
REDISPATH=/usr/local/redis-2.8.3
REDISCLI=$REDISPATH/bin/redis-cli
LOGFILE=$REDISPATH/logs/redis-state.log
LOCALIP=192.168.1.218
REMOTEIP=192.168.1.219
REMOTEREDISROLE=`$REDISCLI -h $REMOTEIP info | grep "role"`
if grep "role:master"$LOGFILEelseecho "`date +%F/%H:%M:%S` :$LOCALIP start as slave error." >> $LOGFILE
fi
else#start as master
$REDISPATH/bin/redis-server $REDISPATH/conf/redis_master.confif [ "$?" == "0" ];then
echo "`date +%F/%H:%M:%S` :$LOCALIP start as master successful." >> $LOGFILEelseecho "`date +%F/%H:%M:%S` :$LOCALIP start as master error." >> $LOGFILE
fi
fi
#创建redis关闭脚本
vi /usr/local/redis-2.8.3/redis-stop.sh
####以下为master上的配置，slave上的配置相同。
#!/bin/bash
REDISPATH=/usr/local/redis-2.8.3
LOGFILE=$REDISPATH/logs/redis-state.log
kill -9 `ps -ef|grep '/bin/redis-server'|grep -v grep|awk'{print $2}'`
if [ "$?" == "0" ];then
echo "`date +%F/%H:%M:%S` :redis shutdown completed!" >> $LOGFILE
elseecho "`date +%F/%H:%M:%S` :redis is not started." >> $LOGFILE
fi
#创建redis配置文件
cp -a -R -p redis.conf /usr/local/redis-2.8.3/conf/redis_master.conf
cp -a -R -p redis.conf /usr/local/redis-2.8.3/conf/redis_slave.conf
#修改redis_master.conf对应配置项：
####192.168.1.218主服务器redis_master.conf对应配置项######
#daemonize no
daemonize yes
#bind 127.0.0.1
bind 192.168.1.218
logfile "/usr/local/redis-2.8.3/logs/redis.log"
#其他配置依据实际生产环境修改
########################################################
####192.168.1.219从服务器redis_master.conf对应配置项######
#daemonize no
daemonize yes
#bind 127.0.0.1
bind 192.168.1.219
logfile "/usr/local/redis-2.8.3/logs/redis.log"
#其他配置依据实际生产环境修改
########################################################
#修改redis_slave.conf对应配置项：
####192.168.1.218主服务器redis_slave.conf对应配置项#######
#daemonize no
daemonize yes
#bind 127.0.0.1
bind 192.168.1.218
logfile "/usr/local/redis-2.8.3/logs/redis.log"
# slaveof
slaveof 192.168.1.219 6379
#其他配置依据实际生产环境修改
########################################################
####192.168.1.219从服务器redis_slave.conf对应配置项#######
#daemonize no
daemonize yes
#bind 127.0.0.1
bind 192.168.1.219
logfile "/usr/local/redis-2.8.3/logs/redis.log"
# slaveof
slaveof 192.168.1.218 6379
#其他配置依据实际生产环境修改
########################################################
#修改redis的属主和权限
chmod –R 750 /usr/local/redis-2.8.3/ chown –R redisadmin:develop /usr/local/redis-2.8.3/
----安装配置keepalived
1.下载keepalived源码Release 1.2.9
注意：最新版为1.2.10测试过程中出错.
wget http://www.keepalived.org/software/keepalived-1.2.9.tar.gz
2.安装keepalived
需要安装以下依赖包： make gcc libpopt-dev libnl-dev libcurl4-openssl-dev popt openssl
cd
tar –zxvf keepalived-1.2.9.tar.gz
cd keepalived-1.2.9
./configure --prefix=/usr/local/keepalived
make && make install
3.配置keepalived
#在Master和Slave上创建如下配置文件（可根据实际情况调整）：
mv/usr/local/keepalived/etc/keepalived/keepalived.conf /usr/local/keepalived/etc/keepalived/keepalived.conf-bak
vim /usr/local/keepalived/etc/keepalived/keepalived.conf
vrrp_script chk_redis {
script "/usr/local/keepalived/etc/keepalived/scripts/chk_redis.sh" ###监控脚本
interval 2 ###监控时间
}
vrrp_instance VI_1 {
state MASTER ###设置为MASTER
interface eth3 ###监控网卡,依据实际情况来定
virtual_router_id 51
priority 101 ###权重值
advert_int 1
authentication {
auth_type PASS ###加密
auth_pass redis ###密码
}
track_script {
chk_redis ###执行上面定义的chk_redis
}
virtual_ipaddress {
192.168.1.220 ###VIP
}
}
在Master和Slave上创建监控Redis的脚本
mkdir /usr/local/keepalived/etc/keepalived/scripts
vi /usr/local/keepalived/etc/keepalived/scripts/chk_redis.sh
####以下为master上的配置，slave上的配置只需要修改对应的LOCALIP和REMOTEIP即可。
#!/bin/bash
REDISPATH=/usr/local/redis-2.8.3
REDISCLI=$REDISPATH/bin/redis-cli
LOGFILE=$REDISPATH/logs/redis-state.log
LOCALIP=192.168.1.218
REMOTEIP=192.168.1.219
VIP=192.168.1.220
VIPALIVE=`ip a | grep "$VIP"`
if [ "$VIPALIVE" == "" ]; then
echo ":"`date`" keepalived server is pengding or stop" >> $LOGFILE
else
echo "bbb" >> $LOGFILE
#check local service is running
if [ "`$REDISCLI –h $LOCALIP –p 6379 PING`" == "PONG" ]; then
# check local redis server role.
REDISROLE=`$REDISCLI info | grep "role"`
if grep "role:slave"$LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1
#change remoting redis server as slave
REMOTEREDISROLE=`$REDISCLI -h $REMOTEIP info | grep "role"`
if grep "role:master"$LOGFILE
$REDISCLI -h $REMOTEIP SLAVEOF $LOCALIP 6379 >> $LOGFILE2>&1
fi
else
REMOTEREDISROLE=`$REDISCLI -h $REMOTEIP info | grep "role"`
if grep "role:master"$LOGFILE
$REDISCLI -h $REMOTEIP SLAVEOF $LOCALIP 6379 >> $LOGFILE2>&1
fi
fi
else
echo ":"`date`"redis server($LOCALIP) is not health..." >> $LOGFILE
sleep 1
if [ "`$REDISCLI –h $LOCALIP –p 6379 PING`" != "PONG" ]; then
echo ":"`date`"redis server($LOCALIP) will be stop..." >> $LOGFILE
service keepalived stop
fi
fi
fi
重要：将相应的配置文件放到相应的地方. #首先在2台服务器上设置keepalived的启动文件：
cp -a -R -p /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/keepalived
chmod 750 /etc/rc.d/init.d/keepalived
chown root /etc/rc.d/init.d/keepalived
#然后在2台服务器上创建配置文件的链接：
mkdir /etc/keepalived/
ln -s /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf
ln -s /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/keepalived
系统测试
注意:一定要先启动redis，再启动keealived，否则redis_check.sh会将keepalived自动关闭。
脚本创建完成以后，我们开始按照如下流程进行测试：
1.启动Master上的Redis
/usr/local/redis-2.8.3/redis-start.sh
#关闭时，直接杀死进程或执行以下脚本
/usr/local/redis-2.8.3/redis-stop.sh
2.启动Slave上的Redis
/usr/local/redis-2.8.3/redis-start.sh
#关闭时，直接杀死进程或执行以下脚本
#/usr/local/redis-2.8.3/redis-stop.sh
3.启动Master上的Keepalived
/etc/rc.d/init.d/keepalived start
#关闭方法
#/etc/rc.d/init.d/keepalived stop
4.启动Slave上的Keepalived
/etc/rc.d/init.d/keepalived start
#关闭方法
#/etc/rc.d/init.d/keepalived stop
继续优化中，未完结。
页:
[1]