mrtg监控squid状态

cy_88

mrtg安全支持对squid服务器各种状态的监控

下面本人实现步骤，仅供参考！

squid安装完后，在mrtg配置文件中将/usr/local/squid/share/mib.txt载入

引用
cp /usr/local/squid/share/mib.txt /etc/mrtg/squid.mib


在mrtg配置文件mrtg.cfg文件中加入：

LoadMIBs: /etc/mrtg/squid.mib


并在squid配置文件中合适位置加入

acl snmppublic snmp_community public
snmp_port 3401
snmp_access allow snmppublic all
【本文实现环境为内网中，严格的说，公网的话，很不安全，还是修改一下默认public 和all！】
在/etc/mrtg/mrtg.cfg中加入：


Target[askwan-cache1]: cacheHttpHits&cacheServerRequests:public@192.168.1.217:3401
RouterName[askwan-cache1]: cacheUniqName
MaxBytes[askwan-cache1]: 100000
Title[askwan-cache1]: HTTP Hits
PageTop[askwan-cache1]: <H1>Cache Statistics: HTTP Hits/Requests</H1>
Suppress[askwan-cache1]: y
LegendI[askwan-cache1]:  HTTP hits
LegendO[askwan-cache1]:  HTTP requests
Legend1[askwan-cache1]:  HTTP hits
Legend2[askwan-cache1]:  HTTP requests
YLegend[askwan-cache1]: perminute
ShortLegend[askwan-cache1]: req/min
Options[askwan-cache1]: nopercent,growright,perminute, dorelpercent, unknaszero




Target[proxy-askwan]: cacheServerInKb&cacheServerOutKb:public@192.168.1.217:3401
#RouterName[proxy-askwan]: cacheUniqName
MaxBytes[proxy-askwan]: 76800
Title[proxy-askwan]: Cache Server Traffic In/Out
PageTop[proxy-askwan]: <H1>Cache Statistics: Server traffic volume (In/Out)</H1>
Suppress[proxy-askwan]: y
LegendI[proxy-askwan]:  Traffic In
LegendO[proxy-askwan]:  Traffic Out
Legend1[proxy-askwan]:  Traffic In
Legend2[proxy-askwan]:  Traffic Out
YLegend[proxy-askwan]: per minute
ShortLegend[proxy-askwan]: b/min
kMG[proxy-askwan]: k,M,G,T
kilo[proxy-askwan]: 1024
Options[proxy-askwan]: nopercent,growright, perminute, unknaszero


重新生成首页，重新执行env LANG=C /usr/local/mrtg/bin/mrtg /etc/mrtg/mrtg.cfg 三次
就可以得到图像了