CentOS5.2上配置Keepalived+LVS集群(DR模式)

hglo

　　LVS+Keepalived 介绍

LVS

LVS是Linux Virtual Server的简写，意即Linux虚拟服务器，是一个虚拟的服务器集群系统。本项目在1998年5月由章文嵩博士成立，是中国国内最早出现的自由软件项目之一。目前有三种IP负载均衡技术（VS/NAT、VS/TUN和VS/DR）；
十种调度算法（rrr|wrr|lc|wlc|lblc|lblcr|dh|sh|sed|nq）。
Keepalvied
Keepalived在这里主要用作RealServer的健康状态检查以及LoadBalance主机和BackUP主机之间failover的实现
IP配置信息:

• LVS-DR-Master            192.168.2.166
  
• LVS-DR-BACKUP            192.168.2.167
  
• LVS-DR-VIP                192.168.2.170
  
• WEB1-Realserver          192.168.2.171
  
• WEB2-Realserver          192.168.2.172
  
• GateWay                    192.168.2.253
  安装LVS和Keepalvied软件包
     
  1. 下载相关软件包
  #mkdir /usr/local/src/lvs
  #cd /usr/local/src/lvs
  #wget
  http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.24.tar.gz
  #wget
  http://www.keepalived.org/software/keepalived-1.1.15.tar.gz
  2. 安装LVS和Keepalived
  
• #lsmod |grep ip_vs
  
• #uname -r
  
• 2.6.18-53.el5PAE
  
• #ln -s /usr/src/kernels/2.6.18-53.el5PAE-i686/   /usr/src/linux
  
• 
  
• #tar zxvf ipvsadm-1.24.tar.gz
  
• #cd ipvsadm-1.24
  
• #make && make install
  
• #find / -name ipvsadm   # 查看ipvsadm的位置
  
• 
  
• #tar zxvf keepalived-1.1.15.tar.gz
  
• #cd keepalived-1.1.15
  
• #./configure   && make && make install
  
• #find / -name keepalived   # 查看keepalived位置
  
• 
  
• #cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
  
• #cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
  
• #mkdir /etc/keepalived
  
• #cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
  
• #cp /usr/local/sbin/keepalived /usr/sbin/
  
• #service keepalived start|stop      #做成系统启动服务方便管理.
  四. 配置LVS实现负载均衡
     1． LVS-DR，配置LVS脚本实现负载均衡
  vi /usr/local/sbin/lvs-dr.sh
  #!/bin/bash
  # description: start LVS of DirectorServer
  #Written by :NetSeek
  http://www.linuxtone.org
  GW=192.168.2.253
  # website director vip.
  WEB_VIP=192.168.2.170
  WEB_RIP1=192.168.2.171
  WEB_RIP2=192.168.2.172
  . /etc/rc.d/init.d/functions
  logger $0 called with $1
  case "$1" in
  start)
            # Clear all iptables rules.
            /sbin/iptables -F
            # Reset iptables counters.
            /sbin/iptables -Z
            # Clear all ipvsadm rules/services.
            /sbin/ipvsadm -C
  #set lvs vip for dr
            /sbin/ipvsadm --set 30 5 60
            /sbin/ifconfig eth0:0 $WEB_VIP broadcast $WEB_VIP netmask 255.255.255.255 up
            /sbin/route add -host $WEB_VIP dev eth0:0
            /sbin/ipvsadm -A -t $WEB_VIP:80 -s wrr -p 3
            /sbin/ipvsadm -a -t $WEB_VIP:80 -r $WEB_RIP1:80 -g -w 1
            /sbin/ipvsadm -a -t $WEB_VIP:80 -r $WEB_RIP2:80 -g -w 1
            touch /var/lock/subsys/ipvsadm >/dev/null 2>&1
           
            # set Arp
            /sbin/arping -I eth0 -c 5 -s $WEB_VIP $GW >/dev/null 2>&1
          ;;
  stop)
            /sbin/ipvsadm -C
            /sbin/ipvsadm -Z
            ifconfig eth0:0 down
            route del $WEB_VIP   >/dev/null 2>&1
            rm -rf /var/lock/subsys/ipvsadm >/dev/null 2>&1
            /sbin/arping -I eth0 -c 5 -s $WEB_VIP $GW
            echo "ipvsadm stoped"
          ;;
  status)
            if [ ! -e /var/lock/subsys/ipvsadm ];then
                      echo "ipvsadm is stoped"
                      exit 1
            else
                      ipvsadm -ln
                      echo "..........ipvsadm is OK."
            fi
         ;;
  *)
            echo "Usage: $0 {start|stop|status}"
            exit 1
  esac
  exit 0
  2． 配置Realserver脚本.
  #!/bin/bash
  # Written by NetSeek
  # description: Config realserver lo and apply noarp
  WEB_VIP=192.168.2.170
  . /etc/rc.d/init.d/functions
  case "$1" in
  start)
          ifconfig lo:0 $WEB_VIP netmask 255.255.255.255 broadcast $WEB_VIP
          /sbin/route add -host $WEB_VIP dev lo:0
          echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
          echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
          echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
          echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
          sysctl -p >/dev/null 2>&1
          echo "RealServer Start OK"
          ;;
  stop)
          ifconfig lo:0 down
          route del $WEB_VIP >/dev/null 2>&1
          echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
          echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
          echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
          echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
          echo "RealServer Stoped"
          ;;
  status)
            # Status of LVS-DR real server.
            islothere=`/sbin/ifconfig lo:0 | grep $WEB_VIP`
            isrothere=`netstat -rn | grep "lo:0" | grep $web_VIP`
            if [ ! "$islothere" -o ! "isrothere" ];then
                 # Either the route or the lo:0 device
                 # not found.
                 echo "LVS-DR real server Stopped."
            else
                 echo "LVS-DR Running."
            fi
  ;;
  *)
            # Invalid entry.
            echo "$0: Usage: $0 {start|status|stop}"
            exit 1
  ;;
  esac
  exit 0
  附上realserver机上的/etc/sysctl.conf：
  # Kernel sysctl configuration file for Red Hat Linux
  #
  # For binary values, 0 is disabled, 1 is enabled.   See sysctl(8) and
  # sysctl.conf(5) for more details.
  # Controls IP packet forwarding
  net.ipv4.ip_forward = 1
  # Controls source route verification
  net.ipv4.conf.default.rp_filter = 1
  # Do not accept source routing
  net.ipv4.conf.default.accept_source_route = 0
  # Controls the System Request debugging functionality of the kernel
  kernel.sysrq = 0
  # Controls whether core dumps will append the PID to the core filename.
  # Useful for debugging multi-threaded applications.
  kernel.core_uses_pid = 1
  net.ipv4.conf.lo.arp_ignore = 1
  net.ipv4.conf.lo.arp_announce = 2
  net.ipv4.conf.all.arp_ignore = 1
  net.ipv4.conf.all.arp_announce = 2
  或者采用secondary ip address方式配置
  # vi /etc/sysctl.conf
  添加以下内容如上所示：
  net.ipv4.conf.lo.arp_ignore = 1
  net.ipv4.conf.lo.arp_announce = 2
  net.ipv4.conf.all.arp_ignore = 1
  net.ipv4.conf.all.arp_announce = 2
  #sysctl –p
  #ip addr add 61.164.122.8/32 dev lo
  #ip add list 查看是否绑定
  3. 启动lvs-dr脚本和realserver启本，在DR上可以查看LVS当前状态:
  #watch ipvsadm –ln
  五．利用Keepalvied实现负载均衡和和高可用性
  
  1.配置在主负载均衡服务器上配置keepalived.conf
  #vi /etc/keepalived/keepalived.conf (主调度器)
  ! Configuration File for keepalived
  global_defs {
     notification_email {
       
  acassen@firewall.loc
       
  failover@firewall.loc
       
  sysadmin@firewall.loc
     }
     notification_email_from
  Alexandre.Cassen@firewall.loc
     smtp_server 127.0.0.1
     smtp_connect_timeout 30
     router_id LVS_DEVEL
  }
  vrrp_instance VI_1 {
      state MASTER
      interface eth0
      virtual_router_id 51
      priority 100
      advert_int 1
      authentication {
            auth_type PASS
            auth_pass 1111
      }
      virtual_ipaddress {
            192.168.2.170
      }
  }
  virtual_server 192.168.2.170 80 {
      delay_loop 6
      lb_algo wrr
      lb_kind DR
      persistence_timeout 60
      protocol TCP
     
      real_server 192.168.2.171 80 {
            weight 3               
            TCP_CHECK {
            connect_timeout 10   
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
  }
      }
      real_server 192.168.2.172 80 {
            weight 3
            TCP_CHECK {
            connect_timeout 10
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
            }
        }
  }
  在备用调度器上：
  #vi /etc/keepalived/keepalived.conf (备用调度器)
  ! Configuration File for keepalived
  global_defs {
     notification_email {
       
  acassen@firewall.loc
       
  failover@firewall.loc
       
  sysadmin@firewall.loc
     }
     notification_email_from
  Alexandre.Cassen@firewall.loc
     smtp_server 127.0.0.1
     smtp_connect_timeout 30
     router_id LVS_DEVEL
  }
  vrrp_instance VI_1 {
      state BACKUP
      interface eth0
      virtual_router_id 51
      priority 99
      advert_int 1
      authentication {
            auth_type PASS
            auth_pass 1111
      }
      virtual_ipaddress {
            192.168.2.170
      }
  }
  virtual_server 192.168.2.170 80 {
      delay_loop 6
      lb_algo wrr
      lb_kind DR
      persistence_timeout 60
      protocol TCP
     
      real_server 192.168.2.171 80 {
            weight 3               
            TCP_CHECK {
            connect_timeout 10   
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
  }
      }
      real_server 192.168.2.172 80 {
            weight 3
            TCP_CHECK {
            connect_timeout 10
            nb_get_retry 3
            delay_before_retry 3
            connect_port 80
            }
        }
  }
  2. BACKUP服务器同上配置，先安装lvs再按装keepalived,仍后配置/etc/keepalived/keepalived.conf，只需将红色标示的部分改一下即可.
  3. vi /etc/rc.local
     #/usr/local/sbin/lvs-dr.sh   将lvs-dr.sh这个脚本注释掉。
     #/usr/local/sbin/lvs-dr.sh stop 停止lvs-dr脚本
     #/etc/init.d/keepalived start   启动keepalived 服务，keepalived就能利用keepalived.conf 配
     置文件，实现负载均衡和高可用.
  4. 查看lvs服务是否正常
    
  #watch ipvsadm –ln
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddressort Scheduler Flags
     -> RemoteAddressort              Forward Weight ActiveConn InActConn
  TCP   61.164.122.8:80 wrr persistent 60
     -> 61.164.122.10:80               Route   3       0            0
     -> 61.164.122.9:80                Route   3       0            0
  复制代码
  #tail –f /var/log/message   监听日志，查看状态，测试LVS负载均衡及高可用性是否有效。
  5．停Master服务器的keepalived服务，查看BAKCUP服务器是否能正常接管服务。
  四．相关参考
  1．LVS 基础知识汇总
  LVS的算法介绍               
  http://www.linuxtone.org/viewthread.php?tid=69
  学习LVS的三种转发模式     
  http://www.linuxtone.org/viewthread.php?tid=77
  LVS中的IP负载均衡技术     
  http://www.linuxtone.org/viewthread.php?tid=68
  更多的请到
  http://www.linuxtone.org
  负载均衡版查看
  Keepalived 相关参考资料。
     
  http://www.keepalived.org/documentation.html