PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 16191.

zhangsanfeng88

　　PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 16191.
Fri Jul 05 14:18:27 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:22:09 2013
　　
　　在解决这个问题的时候，尝试过很多办法；老师讲的，网上查的；都不管用；后来自己摸索出了一条方法，错误的核心不是主库与备库的密码文件不一致吗，而且2个节点中，有一个节点能正常归档，另外一个就是死活归档不了，即使重新修改了密码，也是照样不可以；郁闷至极；
　　后来，灵机一动，既然搞一致，那我将节点中能常常归档的那个密码文件，复制一份给另外一个节点，在复制一份给dataguard节点，结果我终于发泄了.





Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:23:30 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:24:30 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:25:30 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:26:31 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:27:32 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:28:32 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:29:32 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:30:33 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:31:33 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:32:35 2013
Error 1031 received logging on to the standby
PING[ARC2]: Heartbeat failed to connect to standby 'phydb'. Error is 1031.
Fri Jul 05 14:34:50 2013
******************************************************************
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
******************************************************************
LGWR: Standby redo logfile selected for thread 1 sequence 83 for destination LOG_ARCHIVE_DEST_2
Thread 1 advanced to log sequence 83 (LGWR switch)
Current log# 1 seq# 83 mem# 0: +DATA/devdb/onlinelog/group_1.261.819703681
Current log# 1 seq# 83 mem# 1: +FLASH/devdb/onlinelog/group_1.257.819703683
Fri Jul 05 14:35:01 2013
Archived Log entry 191 added for thread 1 sequence 82 ID 0x2b2dcaf4 dest 1:
node1




Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
Beginning instance recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Fri Jul 05 14:40:09 2013
Completed redo scan
read 367 KB redo, 86 data blocks need recovery
Started redo application at
Thread 1: logseq 82, block 7170
Recovery of Online Redo Log: Thread 1 Group 2 Seq 82 Reading mem 0
Mem# 0: +DATA/devdb/onlinelog/group_2.262.819703685
Mem# 1: +FLASH/devdb/onlinelog/group_2.258.819703687
Recovery of Online Redo Log: Thread 1 Group 1 Seq 83 Reading mem 0
Mem# 0: +DATA/devdb/onlinelog/group_1.261.819703681
Mem# 1: +FLASH/devdb/onlinelog/group_1.257.819703683
Completed redo application of 0.07MB
Completed instance recovery at
Thread 1: logseq 83, block 378, scn 1811630
80 data blocks read, 88 data blocks written, 367 redo k-bytes read
Fri Jul 05 14:40:17 2013
Setting recovery pair for thread 1: nab 378 seq 83
Fri Jul 05 14:40:19 2013
Thread 1 advanced to log sequence 84 (thread recovery)
Redo thread 1 internally disabled at seq 84 (SMON)
Fri Jul 05 14:40:24 2013
minact-scn: master continuing after IR
Fri Jul 05 14:40:27 2013
******************************************************************
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
******************************************************************
Thread 2 advanced to log sequence 82 (LGWR switch)
Current log# 4 seq# 82 mem# 0: +DATA/devdb/onlinelog/group_4.267.819704185
Current log# 4 seq# 82 mem# 1: +FLASH/devdb/onlinelog/group_4.260.819704189
Fri Jul 05 14:40:29 2013
Archived Log entry 193 added for thread 1 sequence 83 ID 0x2b2dcaf4 dest 1:
Fri Jul 05 14:40:30 2013
Archived Log entry 194 added for thread 2 sequence 81 ID 0x2b2dcaf4 dest 1:
Fri Jul 05 14:40:30 2013
ARC3: Archiving disabled thread 1 sequence 84
Archived Log entry 195 added for thread 1 sequence 84 ID 0x2b2dcaf4 dest 1:
Fri Jul 05 14:42:00 2013
ARC0: Archive log rejected (thread 1 sequence 83) at host 'phydb'
FAL[server, ARC0]: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance devdb2 - Archival Error. Archiver continuing.
Fri Jul 05 14:45:03 2013
IPC Send timeout detected. Sender: ospid 9998 [oracle@node2.localdomain (PING)]
Receiver: inst 1 binc 429840056 ospid 4733
Fri Jul 05 14:47:27 2013
db_recovery_file_dest_size of 4347 MB is 8.86% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
node2