设为首页 收藏本站
查看: 1269|回复: 0

[经验分享] C# FTP上传的实现方法 (包括断点上传)

[复制链接]
发表于 2015-11-6 11:22:56 | 显示全部楼层 |阅读模式
  在使用ftp上传一般使用
  

  FtpWebRequest创建对象 执行对应操作
  如下
  FtpWebRequest reqFTP;
            // 根据uri创建FtpWebRequest对象
            reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(uri));
            // ftp用户名和密码
            reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
            // 默认为true,连接不会被关闭
            // 在一个命令之后被执行
            reqFTP.KeepAlive = false;
            // 指定执行什么命令
            reqFTP.Method = WebRequestMethods.Ftp.AppendFile;
            // 指定数据传输类型
            reqFTP.UseBinary = true;
            // 上传文件时通知服务器文件的大小
            reqFTP.ContentLength = fileInf.Length;

  

  1.直接上传
  
  在此需要使用req.FTP.Method = WebRequestMethods.Ftp.UploadFile;
  2.断点续传(自己实现的,不知道是否科学)
  在此需要使用req.FTP.Method = WebRequestMethods.Ftp.AppendFile;
  但须先读取服务器上已存在的该文件的大小,上传时直接跳过该大小
  利用此方法直接从后面继续读取文件即可
  FileStream fs= fileInf.OpenRead();
  fs.Seek(startfilesize, 0);

  
  具体断点续传实现如下
  
  public bool Upload(string filename, string ftpServerIP, string ftpUserID, string ftpPassword, ToolStripProgressBar pb,string path)
        {
            if (path == null)
                path = "";
            bool success = true;
            FileInfo fileInf = new FileInfo(filename);
            long allbye = (long)fileInf.Length;
            if (fileInf.Name.IndexOf("#") == -1)
            {
                newFileName = QCKG(fileInf.Name);
            }
            else
            {
                newFileName = fileInf.Name.Replace("#", "#");
                newFileName = QCKG(newFileName);
            }
            long startfilesize = GetFileSize(newFileName, ftpServerIP, ftpUserID, ftpPassword, path);
            if (startfilesize >= allbye)
            {
                return false;
            }
            //startfilesize=0;
            long startbye = startfilesize;
            pb.Maximum = Convert.ToInt32(allbye);


            pb.Minimum = Convert.ToInt32(startfilesize);
            
            string uri;
            if (path.Length == 0)
                uri = "ftp://" + ftpServerIP + "/" + newFileName;
            else
                uri = "ftp://" + ftpServerIP + "/" + path + newFileName;
            FtpWebRequest reqFTP;
            // 根据uri创建FtpWebRequest对象
            reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(uri));
            // ftp用户名和密码
            reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
            // 默认为true,连接不会被关闭
            // 在一个命令之后被执行
            reqFTP.KeepAlive = false;
            // 指定执行什么命令
            reqFTP.Method = WebRequestMethods.Ftp.AppendFile; (直接上传修改此处!)
            // 指定数据传输类型
            reqFTP.UseBinary = true;
            // 上传文件时通知服务器文件的大小
            reqFTP.ContentLength = fileInf.Length;
            int buffLength = 2048;// 缓冲大小设置为2kb
            byte[] buff = new byte[buffLength];
            // 打开一个文件流 (System.IO.FileStream) 去读上传的文件
            FileStream fs= fileInf.OpenRead();
            try
            {
                // 把上传的文件写入流
                Stream strm = reqFTP.GetRequestStream();
                // 每次读文件流的2kb   
                fs.Seek(startfilesize, 0);(直接上传须去除该处)
                int contentLen = fs.Read(buff, 0, buffLength);
                // 流内容没有结束
                while (contentLen != 0)
                {
                    // 把内容从file stream 写入 upload stream
                    strm.Write(buff, 0, contentLen);
                    contentLen = fs.Read(buff, 0, buffLength);
                    startbye += contentLen;
                    pb.Value = Convert.ToInt32(startbye);
                }
                // 关闭两个流
                strm.Close();
                fs.Close();
             }
             catch
             {
                 success = false;
             }
             return success;
        }
  

  具体ftp上传类参看下期blog
  public bool Upload(string filename, string ftpServerIP, string ftpUserID, string ftpPassword, ToolStripProgressBar pb,string path)
        {
            if (path == null)
                path = "";
            bool success = true;
            FileInfo fileInf = new FileInfo(filename);
            long allbye = (long)fileInf.Length;
            if (fileInf.Name.IndexOf("#") == -1)
            {
                newFileName = QCKG(fileInf.Name);
            }
            else
            {
                newFileName = fileInf.Name.Replace("#", "#");
                newFileName = QCKG(newFileName);
            }
            long startfilesize = GetFileSize(newFileName, ftpServerIP, ftpUserID, ftpPassword, path);
            if (startfilesize >= allbye)
            {
                return false;
            }
            //startfilesize=0;
            long startbye = startfilesize;
            pb.Maximum = Convert.ToInt32(allbye);


            pb.Minimum = Convert.ToInt32(startfilesize);
            
            string uri;
            if (path.Length == 0)
                uri = "ftp://" + ftpServerIP + "/" + newFileName;
            else
                uri = "ftp://" + ftpServerIP + "/" + path + newFileName;
            FtpWebRequest reqFTP;
            // 根据uri创建FtpWebRequest对象
            reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(uri));
            // ftp用户名和密码
            reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
            // 默认为true,连接不会被关闭
            // 在一个命令之后被执行
            reqFTP.KeepAlive = false;
            // 指定执行什么命令
            reqFTP.Method = WebRequestMethods.Ftp.AppendFile;
            // 指定数据传输类型
            reqFTP.UseBinary = true;
            // 上传文件时通知服务器文件的大小
            reqFTP.ContentLength = fileInf.Length;
            int buffLength = 2048;// 缓冲大小设置为2kb
            byte[] buff = new byte[buffLength];
            // 打开一个文件流 (System.IO.FileStream) 去读上传的文件
            FileStream fs= fileInf.OpenRead();
            try
            {
                // 把上传的文件写入流
                Stream strm = reqFTP.GetRequestStream();
                // 每次读文件流的2kb   
                fs.Seek(startfilesize, 0);
                int contentLen = fs.Read(buff, 0, buffLength);
                // 流内容没有结束
                while (contentLen != 0)
                {
                    // 把内容从file stream 写入 upload stream
                    strm.Write(buff, 0, contentLen);
                    contentLen = fs.Read(buff, 0, buffLength);
                    startbye += contentLen;
                    pb.Value = Convert.ToInt32(startbye);
                }
                // 关闭两个流
                strm.Close();
                fs.Close();
             }
             catch
             {
                 success = false;
             }
             return success;
        }public bool Upload(string filename, string ftpServerIP, string ftpUserID, string ftpPassword, ToolStripProgressBar pb,string path)
        {
            if (path == null)
                path = "";
            bool success = true;
            FileInfo fileInf = new FileInfo(filename);
            long allbye = (long)fileInf.Length;
            if (fileInf.Name.IndexOf("#") == -1)
            {
                newFileName = QCKG(fileInf.Name);
            }
            else
            {
                newFileName = fileInf.Name.Replace("#", "#");
                newFileName = QCKG(newFileName);
            }
            long startfilesize = GetFileSize(newFileName, ftpServerIP, ftpUserID, ftpPassword, path);
            if (startfilesize >= allbye)
            {
                return false;
            }
            //startfilesize=0;
            long startbye = startfilesize;
            pb.Maximum = Convert.ToInt32(allbye);


            pb.Minimum = Convert.ToInt32(startfilesize);
            
            string uri;
            if (path.Length == 0)
                uri = "ftp://" + ftpServerIP + "/" + newFileName;
            else
                uri = "ftp://" + ftpServerIP + "/" + path + newFileName;
            FtpWebRequest reqFTP;
            // 根据uri创建FtpWebRequest对象
            reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(uri));
            // ftp用户名和密码
            reqFTP.Credentials = new NetworkCredential(ftpUserID, ftpPassword);
            // 默认为true,连接不会被关闭
            // 在一个命令之后被执行
            reqFTP.KeepAlive = false;
            // 指定执行什么命令
            reqFTP.Method = WebRequestMethods.Ftp.AppendFile;
            // 指定数据传输类型
            reqFTP.UseBinary = true;
            // 上传文件时通知服务器文件的大小
            reqFTP.ContentLength = fileInf.Length;
            int buffLength = 2048;// 缓冲大小设置为2kb
            byte[] buff = new byte[buffLength];
            // 打开一个文件流 (System.IO.FileStream) 去读上传的文件
            FileStream fs= fileInf.OpenRead();
            try
            {
                // 把上传的文件写入流
                Stream strm = reqFTP.GetRequestStream();
                // 每次读文件流的2kb   
                fs.Seek(startfilesize, 0);
                int contentLen = fs.Read(buff, 0, buffLength);
                // 流内容没有结束
                while (contentLen != 0)
                {
                    // 把内容从file stream 写入 upload stream
                    strm.Write(buff, 0, contentLen);
                    contentLen = fs.Read(buff, 0, buffLength);
                    startbye += contentLen;
                    pb.Value = Convert.ToInt32(startbye);
                }
                // 关闭两个流
                strm.Close();
                fs.Close();
             }
             catch
             {
                 success = false;
             }
             return success;
        }         版权声明:本文为博主原创文章,未经博主允许不得转载。 博客列表: http://blog.iyunv.com/chr23899

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-135837-1-1.html 上篇帖子: FTP-RFC959中文版 下篇帖子: solaris9下FTP服务器重新启动一例
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表