设为首页 收藏本站
查看: 639|回复: 0

[经验分享] Message warn for oracle

[复制链接]

尚未签到

发表于 2016-7-20 11:43:33 | 显示全部楼层 |阅读模式
--===================================================================
-- create type
--===================================================================
create or replace type ty_str_split is table of varchar2 (4000);
/

--===================================================================
-- create function
--===================================================================
create or replace function fn_split (
p_str in varchar2,        --
p_delimiter in varchar2)  --
    return ty_str_split
is
    j int := 0;
    i int := 1;
    len int := 0;
    len1 int := 0;
    str varchar2 (4000);
    str_split ty_str_split := ty_str_split ();
begin
    len := length (p_str);
    len1 := length (p_delimiter);

    while j < len
    loop
        j := instr (p_str, p_delimiter, i);

        if j = 0
        then
            j := len;
            str := substr (p_str, i);
            str_split.extend;
            str_split (str_split.count) := str;

            if i >= len
            then
                exit;
            end if;
        else
            str := substr (p_str, i, j - i);
            i := j + len1;
            str_split.extend;
            str_split (str_split.count) := str;
        end if;
    end loop;

    return str_split;
end fn_split;
/
--================================================================
-- pr_callreasonwarn
--================================================================
create or replace procedure pr_callreasonwarn
as
v_phones_cfg               varchar(2000);
v_hour_cfg                 int;
v_hour_sendmsg_cfg         int;
v_sendmsgnum_every_cfg     int;
v_sendmsgnum_all_cfg       int;
v_sms_warn_content         varchar(4000);
v_rownum_atype             int;
v_rownum_alltype           int;
v_intsessionid             int;
v_vcid                     int;
begin
  v_vcid:=4;
  --Get config info.
   begin
      select strvalue into v_phones_cfg
      from cc_systemparam
      where strkey = 'CallReasonWarnPhones';
   -- scan cr_slavelog4sms table N hour
      select strvalue into v_hour_cfg
      from cc_systemparam
      where strkey = 'CallReasonScanHour';
  exception
          when no_data_found then
          begin
            return;
          end;  
    end;

    begin
      select strvalue into v_hour_sendmsg_cfg
      from cc_systemparam
      where strkey='SendMsgLogHourInterval';
  exception
          when no_data_found then
          begin
             v_hour_sendmsg_cfg:=24;
          end;  
    end;

    begin
      select strvalue into v_sendmsgnum_every_cfg
      from cc_systemparam
      where strkey='SendMsgCountEvery';
  exception
          when no_data_found then
          begin
             v_sendmsgnum_every_cfg:=10;
          end;  
end;

    begin
      select strvalue into v_sendmsgnum_all_cfg
      from cc_systemparam
      where strkey='SendMsgCountAll';
  exception
          when no_data_found then
          begin
             v_sendmsgnum_all_cfg:=50;
          end;  
    end;

  
  for cur_warndata in (
      select a.titleid,c.strname,b.reasonid,b.sms_warn_content
           from (           
       select  a.titleid,
                    count(1) cnt
      from cr_slavelog4sms a
      where  a.callingtime>=sysdate-v_hour_cfg/24
      and  a.callingtime<=sysdate
      group by a.titleid
      ) a,cr_title_cfg b,cc_systemdict c
      where b.titleid=c.dictid
      and c.dictid = a.titleid
  and b.sms_warn_val is not null
      and a.cnt>nvl(b.sms_warn_val,0)
  ) loop
      
   for cur_phones in(
    select *
    from table(cast(fn_split(v_phones_cfg, ',') as
            ty_str_split))  
   )   
     loop     
         --each call reason
         select count(1) into v_rownum_atype
         from cr_warn_smslog
         where send_time>=sysdate-v_hour_sendmsg_cfg/24
           and send_time<=sysdate
           and receiver=cur_phones.column_value
           and titleid=cur_warndata.titleid;
         --all call reason
         select count(1) into v_rownum_alltype
           from cr_warn_smslog
         where send_time>=sysdate-v_hour_sendmsg_cfg/24
           and send_time<=sysdate
           and receiver=cur_phones.column_value;
      
     if v_rownum_atype>= v_sendmsgnum_every_cfg then
       null;
     else
           if v_rownum_alltype >=v_sendmsgnum_all_cfg then
             null;   
           else
               v_sms_warn_content:='The '||cur_warndata.strname||' call reason exceeds the default times, the remark:'||cur_warndata.sms_warn_content;
               zxdb_kf.PR_GetSessionID('HF_FAXMISSION',v_intsessionid);
   
                insert into zxdb_kf.hf_faxmission(intsessionid, strcustomerno, strsender, strfaxnotice, intstatus, strnotice)
                   values (v_intsessionid, cur_phones.column_value, '994', '03', 0, v_sms_warn_content);
--Create log
insert into  cr_warn_smslog(  
                  vcid,
                  titleid,
                  reasonid,
                  receiver   
                 )
                values(
                  v_vcid,
                  cur_warndata.titleid,
  cur_warndata.reasonid,
  cur_phones.column_value
                );
              
           end if;
     
     end if;
     end loop;
     commit;
  end loop;   
end;
/

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-246926-1-1.html 上篇帖子: Backup tables for oracle 下篇帖子: oracle dul工具使用
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表