centOS 6.5 部署SaltStack

67rt

(1)、python 2.7安装
https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tgz

1 2 3 4 5 6

# tar xvzf Python-2.7.8.tgz # cd Python-2.7.8 # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install

## 将python头文件拷贝到标准目录，以避免编译saltstack时，找不到所需的头文件

1 2	# cd /usr/local/include/python2.7 # cp -a ./* /usr/local/include/

## 备份旧版本的python，并符号链接新版本的python

1 2 3

# cd /usr/bin # mv python python2.6 # ln -s /usr/local/bin/python

## 修改yum脚本，使其指向旧版本的python，已避免其无法运行
# vim /usr/bin/yum

#!/usr/bin/python  -->  #!/usr/bin/python2.6

(2)、PyYAML模块安装
http://pyyaml.org/download/libyaml/yaml-0.1.5.tar.gz
https://pypi.python.org/packages/source/P/PyYAML/PyYAML-3.11.tar.gz

1 2 3 4 5 6 7 8

# tar xvzf yaml-0.1.5.tar.gz# cd yaml-0.1.5 # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install    # tar xvzf PyYAML-3.11.tar.gz # cd PyYAML-3.11 # python setup.py install

(3)、setuptools模块安装
https://pypi.python.org/packages/source/s/setuptools/setuptools-7.0.tar.gz

1 2 3

# tar xvzf setuptools-7.0.tar.gz # cd setuptools-7.0 # python setup.py install

(4)、markupsafe模块安装
https://pypi.python.org/packages/source/M/MarkupSafe/MarkupSafe-0.9.3.tar.gz

1 2 3

# tar xvzf MarkupSafe-0.9.3.tar.gz # cd MarkupSafe-0.9.3 # python setup.py install

(5)、jinja2模块安装
https://pypi.python.org/packages/source/J/Jinja2/Jinja2-2.7.3.tar.gz

1 2 3

# tar xvzf Jinja2-2.7.3.tar.gz # cd Jinja2-2.7.3 # python setup.py install

(6)、autocon模块安装
http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz

注意：
系统自带的autoconf版本为2.63，在编译ZeroMQ时，由于版本较低，会报错不通过，故需安装大于2.63的版本。

1 2 3 4 5

# tar xvzf autoconf-2.69.tar.gz # cd autoconf-2.69 # ./configure # make # make install

• 如果原来已经装过，还需要覆盖原来的。
  

• 1 2	cp   /usr/local/bin/autoconf /usr/bin/         cp  /usr/local/bin/autoreconf /usr/bin/

  
  
  
• 
  
  

## 其他依赖库安装

1 2 3

# yum -y install libuuid.x86_64 libuuid-devel.x86_64 # yum -y install uuid.x86_64 uuid-devel.x86_64 # yum -y install uuid-c++.x86_64 uuid-c++-devel.x86_64

https://github.com/jedisct1/libsodium/archive/1.0.1.tar.gz

1 2 3 4 5 6

# tar xvzf libsodium-1.0.1.tar.gz # cd libsodium-1.0.1 # ./autogen.sh # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install

[size=1em]./autogen.sh 报错： [size=1em]Can't exec "aclocal": 没有那个文件或目录 at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. [size=1em]autoreconf: failed to run aclocal: 没有那个文件或目录

解决方法：

[size=1em]1

[size=1em] yum install automake

[size=1em]1 [size=1em]2 [size=1em]3 [size=1em]4 [size=1em]5 [size=1em]6 [size=1em]7

[size=1em]报错： [size=1em]configure.ac:418: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL [size=1em]      If this token and others are legitimate, please use m4_pattern_allow. [size=1em]      See the Autoconf documentation. [size=1em]autoreconf: /usr/bin/autoconf failed with exit status: 1 [size=1em]解决方法： [size=1em] [size=1em] yum install libtool

http://download.zeromq.org/zeromq-4.0.5.tar.gz
https://pypi.python.org/packages/source/p/pyzmq/pyzmq-14.4.1.tar.gz

1 2 3 4 5 6

# tar xvzf zeromq-4.0.5.tar.gz # cd zeromq-4.0.5 # ./autogen.sh # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install

1 2 3 4

# tar xvzf pyzmq-14.4.1.tar.gz # cd pyzmq-14.4.1 # python setup.py configure --zmq=/usr/local # python setup.py install

(7)、M2Crypto模块安装
# yum -y install swig.x86_64

http://www.openssl.org/source/openssl-1.0.1g.tar.gz

1 2 3 4 5

# tar xvzf openssl-1.0.1g.tar.gz # cd openssl-1.0.1g # ./config shared --prefix=/usr/local # make && make install cp -a /usr/local/include/openssl /usr/include/

1 2 3 4 5 6 7 8 9 10 11

vim Python-2.7.8/Modules/Setup # Socket module helper for socket(2) _socket socketmodule.c timemodule.c # Socket module helper for SSL support; you must comment out the other # socket line above, and possibly edit the SSL variable: #SSL=/usr/local/ssl _ssl _ssl.c \         -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \         -L$(SSL)/lib -lssl -lcrypto 取消那四行的注释

# vim/etc/ld.so.conf

/usr/local/lib

/usr/local/lib64

# /sbin/ldconfig

# cd Python-2.7.8
# make && make install

https://pypi.python.org/packages/source/M/M2Crypto/M2Crypto-0.22.3.tar.gz

1 2 3

# tar xvzf M2Crypto-0.22.3.tar.gz # cd M2Crypto-0.22.3 # python setup.py install

saltstack安装
https://github.com/saltstack/salt/releases/download/v2014.7.0/salt-2014.7.0.tar.gz
# tar xvzf salt-2014.7.0.tar.gz
# cd salt-2014.7.0
# python setup.py install

# salt --versions-report