Subversion Apache setting

yzc164

tools download:

• apache_2.0.63-win32-x86-no_ssl.msi
  address:http://apache.mirror.phpchina.com/httpd/binaries/win32/apache_2.0.63-win32-x86-no_ssl.msi
  
• svn-1.4.5-setup.exe
  address:http://subversion.tigris.org/files/documents/15/39559/svn-1.4.5-setup.exe
  
• TortoiseSVN. Use it to control the subversion tools.
  

Setup the software

• setup Apache. When it is installed completely. Use the browser and add the addresshttp://localhost to check.
  
• setup svn-1.4.5-setup.exe. When the setup is finished. Open the cmd and add svn --version to check it is working or not.
  

config the svn

• create the file in the hard disk. E:\svnroot\MyProject.And then use svnadmin create E:\svnroot\MyProject command to create relative config file and folder .If it can do ,you can see there are many files and folders  which are created in the MyProject folder.
  
• open conffolder, and then open svnserve.conffile, find out the bottom line # password-db = passwd. And remove the
  remark #,it means if you want to enter MyProject file ,you need
  password.However, where to set our passwords. step 3
  
• open the anther file in the conf folder which is called passwd,and then use the text editor to add the following sentences.
  写道
  
  [users]
  hadeslee=hadeslee1234
  tom=123456
  
   
  The
  above sentences mean that we created two users.one is hadeslee,
  password hadeslee1234 .And the other is tom ,password is 123456.
  
• create the file called access.auth. And add the following sentences:
  access.auth 写道
  
  [MyProject:/]
  hadeslee = rw
  [MyProject:/module1]
  tom=rw
  hadeslee=rw
  
   
  The
  above sentences mean that hadeslee has the read and write authority to
  control the MyProject and module1 folders.But tom only has the read and
  write to control the module1 folder.
  

Config the apache

• 
  Enter Subversion home folder,find the follow two files in the bin folder.
  mod_authz_svn.so
  mod_dav_svn.so
  
   
  copy these two files to the Apache home's modules folder.
  
• open Apache home's conf folder ,open httpd.conf file and add the following sentences:
  httpd.cof 写道
  
  LoadModule dav_svn_module modules/mod_dav_svn.so
  LoadModule authz_svn_module modules/mod_authz_svn.so
  
   
  and then remove the mark # before
  httpd.conf 写道
  
  LoadModule dav_module modules/mod_dav.so
  
   
  
• open the httpd.conffile in the config folder,add the following consent:
  httpd.conf写道
  
  <Location /svn/MyProject>
  DAV svn
  SVNPath E:/svnroot/MyProject
  AuthzSVNAccessFile E:/svnroot/MyProject/conf/access.auth
  Satisfy Any
  Require valid-user
  AuthType Basic
  AuthName "Subversion repositories"
  AuthUserFile E:/svnroot/MyProject/conf/users.auth
  Require valid-user
  </Location>
  
   
  
• generate users.auth file .Enter the apache home's bin folder, input the following commands:
  D:\Program Files\Apache Group\Apache2\bin>
  
  htpasswd -cb users.auth hadeslee hadeslee1234
  
  
  Automatically using MD5 format.
  Adding password for user hadeslee
  
  D:\Program Files\Apache Group\Apache2\bin>
  if you want to  add another use ,use the following commands :
  D:\Program Files\Apache Group\Apache2\bin>
  
  htpasswd -b users.auth tom 123456
  Automatically using MD5 format.
  Adding password for user tom
  
  D:\Program Files\Apache Group\Apache2\bin>
  tip: c means to recreate the users.auth.
  
  copy the users.auth to E:/svnroot/MyProject/conf/
  

　　Total, all is finished . open the browser and input the http://localhost/svn/MyProjectaddress to check
If you want to add other project in the subversion server.There are several suggestions:

• put the project in the MyProject folder ,you don't need to add any other setting .
  
• If
  you  want to create the other folder ,such as YourProject .You can add
  <Location...>setting into httpd.conf file.Of course ,you should
  also recreate the password.
  

　　eclipse config

　　
　　add the eclipse plugin
address：http://subclipse.tigris.org/update_1.4.x/