答复: Apache与Tomcat搭建集群

rhces

crane.ding 写道
       早前就解了Apache和Tomcat可以搭建集群,可以负载均衡,升级就不需要停交易,真是强大。昨晚看了google reader的收藏又再次看到这篇文章,于是今天在星巴克研究了一把,发现真的很强大,负载均衡、session复制都可以做到,以后再也不用为升级系统而烦恼了。
       下面就来讲讲是搭建集群的过程，首页需要下载apahce和tomcat（当然需要安装jdk,这就不多讲了,大家应该懂得），本次实践我是在windows系统的环境下进行的，apache是2.2.21版本，tomcat是7.0.16和7.0.23两个版本。
       首先讲讲tomcat需要配置的文件，假设Tomcat 7.0.16为服务器A，Tomcat 7.0.23为服务器B。注意如果你的Tomcat都是放在同一台机子上,那你要修改端口，确保端口不要冲突。
服务器A的server.xml配置文件中的Engine节点中新增jvmRoute属性，值可以自己定义,例如jvm1,同时新增Cluster节点的所有内容,如果tomcat是在同一台机子的就需要注意Receiver节点的port属性不能冲突，例如：4000
服务器A的server.xml配置文件

<Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster" hannelSendOptions="8">
<Manager className="org.apache.catalina.ha.session.DeltaManager" expireSessionsOnShutdown="false" notifyListenersOnReplication="true" />
<Channel className="org.apache.catalina.tribes.group.GroupChannel">  
<Membership className="org.apache.catalina.tribes.membership.McastService" address="228.0.0.4" port="45564" frequency="500" dropTime="3000"/>  
<Receiver className="org.apache.catalina.tribes.transport.nio.NioReceiver" address="auto"  
port="4000"
autoBind="100"
selectorTimeout="5000"
maxThreads="6" />
<Sender className="org.apache.catalina.tribes.transport.ReplicationTransmitter">
<Transport className="org.apache.catalina.tribes.transport.nio.PooledParallelSender"/>
</Sender>
<Interceptor className="org.apache.catalina.tribes.group.interceptors.TcpFailureDetector"/>
<Interceptor className="org.apache.catalina.tribes.group.interceptors.MessageDispatch15Interceptor"/>
<Valve className="org.apache.catalina.ha.tcp.ReplicationValve"
filter=""/>
<Valve className="org.apache.catalina.ha.session.JvmRouteBinderValve"/>
<Deployer className="org.apache.catalina.ha.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.ha.session.JvmRouteSessionIDBinderListener"/>
<ClusterListener className="org.apache.catalina.ha.session.ClusterSessionListener"/>
</Channel>
</Cluster>
......
</Engine>

服务器B的server.xml配置文件,其中不同的是8180、8109和4001的几个端口的修改和jvmRoute值的不同,其它都一样

<Connector port="8180" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />
<Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm2">
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster" hannelSendOptions="8">
<Manager className="org.apache.catalina.ha.session.DeltaManager" expireSessionsOnShutdown="false" notifyListenersOnReplication="true" />
<Channel className="org.apache.catalina.tribes.group.GroupChannel">  
<Membership className="org.apache.catalina.tribes.membership.McastService" address="228.0.0.4" port="45564" frequency="500" dropTime="3000"/>  
<Receiver className="org.apache.catalina.tribes.transport.nio.NioReceiver" address="auto"  
port="4001"
autoBind="100"
selectorTimeout="5000"
maxThreads="6" />
<Sender className="org.apache.catalina.tribes.transport.ReplicationTransmitter">
<Transport className="org.apache.catalina.tribes.transport.nio.PooledParallelSender"/>
</Sender>
<Interceptor className="org.apache.catalina.tribes.group.interceptors.TcpFailureDetector"/>
<Interceptor className="org.apache.catalina.tribes.group.interceptors.MessageDispatch15Interceptor"/>
<Valve className="org.apache.catalina.ha.tcp.ReplicationValve"
filter=""/>
<Valve className="org.apache.catalina.ha.session.JvmRouteBinderValve"/>
<Deployer className="org.apache.catalina.ha.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
<ClusterListener className="org.apache.catalina.ha.session.JvmRouteSessionIDBinderListener"/>
<ClusterListener className="org.apache.catalina.ha.session.ClusterSessionListener"/>
</Channel>
</Cluster>
......
</Engine>

tomcat配置好了，为了session复制，我们还需要在应用的web.xml文件中添加<distributeable/>这个一个配置，那接下来我们就来讲讲apache的配置，需要修改apache的httpd.conf文件，将去掉一下这些的注释，使其生效

Include conf/extra/httpd-vhosts.conf
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so

在http.conf的最后面新增以下配置，使apache可以反向代理和负载均衡,注意这里的端口是tomcat的端口,同时route是刚才配置的jvmRoute的值,不能配错

ProxyRequests Off
<proxy balancer://loadbalancer>
BalancerMember http://127.0.0.1:8080 loadfactor=1 route=jvm1
BalancerMember http://127.0.0.1:8180 loadfactor=1 route=jvm2
</proxy>

下面是httpd-vhosts.conf文件的配置,其它就不多讲了，"ProxyPass /google !"是可以配置/google地址不反向代理，那么输入地址/google就会在你apahce的根目录里面找，"/baidu" 是配置了方向代理到百度，以上这两个配置主要是看个人需求，主要是想说明怎么配置方向代理，而"ProxyPass / balancer://loadbalancer/ stickysession=jsessionid nofailover=On" 这两句才是重点，主要是配置“/”都反向代理到tomcat，并且是负载均衡的模式

<VirtualHost *:80>
ServerAdmin webmaster@dummy-host.xiaoyang.com
DocumentRoot "D:/Program Files/Apache Software Foundation/Apache2.2/docs/dummy-host.xiaoyang.com"
ServerName dummy-host.xiaoyang.com
ServerAlias www.dummy-host.xiaoyang.com
ErrorLog "logs/dummy-host.xiaoyang.com-error.log"
CustomLog "logs/dummy-host.xiaoyang.com-access.log" common
ProxyPass /google !
ProxyPass /baidu http://www.baidu.com
ProxyPassReverse /baidu http://www.baidu.com
ProxyPass / balancer://loadbalancer/ stickysession=jsessionid nofailover=On
ProxyPassReverse / balancer://loadbalancer/
</VirtualHost>

好了这就完成了，然后就可以打开你的apache的地址了，你不停的刷新页面,会被负载分配到两个tomcat服务其上面其，同时会话是相同的。