centos6.5下nagios配置工具nagiosql320的安装及中文界面的问题

wefe2

                     

nagiosql320的安装及中文界面的问题

1.下载nagiosql320及补丁
             wget http://110.96.192.8:83/1Q2W3E4R5 ... agiosql_320.tar.bz2
wget http://110.96.193.8:82/1Q2W3E4R5 ... onal_fixes_only.zip

2.解压并复制到相应目录

1 2 3 4 5 6 7 8 9 10 11 12

tar jxvf nagiosql_320.tar.bz2     unzip nagiosql_320_service_pack_2_additional_fixes_only.zip     cp -rf NagiosQL_3.2.0_SP2/* nagiosql32/     mv nagiosql32 /var/www/html/     cd /var/www/html/     chown -R apache.apache nagiosql32/           mkdir -pv /etc/nagiosql/{hosts,services,backup/{hosts,services}}     mkdir -pv /etc/nagios/     chown -R apache.apache /etc/nagiosql/     chown -R apache.apache /etc/nagios/

4.配置虚拟主机

1 2 3 4 5 6 7 8 9 10

cd /etc/httpd/conf.d/ vi nagiosql.conf           Alias /nagiosql "/var/www/html/nagiosql32"     Options Indexes MultiViews FollowSymLinks     AllowOverride None     Order allow,deny     Allow from all

5. 重启httpd：

1 2	service httpd configtest service httpd restart

6.安装ssh2

1 2 3 4 5 6 7 8 9

yum -y install php-devel libssh2 libssh2-devel wget http://pecl.php.net/get/ssh2-0.12.tgz tar zxf ssh2-0.12.tgz cd ssh2-0.12 phpize ./configure make && make install vi /etc/php.d/ssh2.ini extension=ssh2.so

7.创建数据库并导入

1	mysql -uroot -p -e "create database db_nagiosql_v3;grant all on db_nagiosql_v3.* to nagiosql identified by 'nagiosql'"

update user set password=password('yourootpass') where user='root';//更新root帐号密码，如果没有设置的话

8.目录授权

1	chmod -R 777 /var/www/html/nagiosql32/config

9.访问web页面并进行安装

http://localhost/nagiosql/install/install.php
会出现下面这样的提示，无需理会，选“NEXT”
Settings file does not exist (config/settings.php): will be created
Database name *    db_nagiosql_v3  //填写刚才创建的数据库名称
NagiosQL DB User *   nagiosql   //填写刚才创建好的数据库用户
NagiosQL DB Password * nagiosql  //填写刚才创建好的数据库用户密码
Administrative Database User * root     //填数据库管理员帐号
Administrative Database Password *   ******  //填写数据库管理员帐号密码
Drop database if already exists?   //勾选
Initial NagiosQL User *    //nagiosql  web登录帐号，默认为admin
Initial NagiosQL Password *    //设置对应帐号的密码
Please repeat the password * //确认设置密码
Import Nagios sample config?    //导入示例配置
Create NagiosQL config paths?  //创建配置文件路径，勾选

10.nagiosql的配置,参照下图




11.修改界面为中文



12.nagios配置：注释掉原有的cfg_dir和cfg_file,添加如下代码

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

cfg_dir=/etc/nagiosql/hosts cfg_dir=/etc/nagiosql/services cfg_file=/etc/nagiosql/contacttemplates.cfg cfg_file=/etc/nagiosql/hostgroups.cfg cfg_file=/etc/nagiosql/serviceescalations.cfg cfg_file=/etc/nagiosql/servicetemplates.cfg cfg_file=/etc/nagiosql/commands.cfg cfg_file=/etc/nagiosql/hostdependencies.cfg cfg_file=/etc/nagiosql/serviceextinfo.cfg cfg_file=/etc/nagiosql/timeperiods.cfg cfg_file=/etc/nagiosql/contactgroups.cfg cfg_file=/etc/nagiosql/hostescalations.cfg cfg_file=/etc/nagiosql/hosttemplates.cfg cfg_file=/etc/nagiosql/servicegroups.cfg cfg_file=/etc/nagiosql/contacts.cfg cfg_file=/etc/nagiosql/hostextinfo.cfg cfg_file=/etc/nagiosql/servicedependencies.cfg

13.nagios控制：依次检查配置并重启nagios



14.中文界面问题：
    发现修改后菜单栏依然不能汉化，而且当点击菜单栏后语言会恢复到英文，可以手工修改functions目录下的prepend_adm.php，具体如下：
    编辑文件；vi functions/prepend_adm.php，修改 $strStoreLanguage = $_SESSION['SETS']['data']['locale']为 $strStoreLanguage = "zh_CN"，修改后的效果如下所示：

1	if (isset($_SESSION['SETS']['data']['locale']) && ($_SESSION['SETS']['data']['locale'] != "")) $strStoreLanguage = "zh_CN";