Python netmiko 管理 network devices 简例

ty9919

1、show run 的输出如下:　　Building configuration...
　　Current configuration : 874 bytes
　　!
　　version 12.4
　　service timestamps debug datetime msec
　　service timestamps log datetime msec
　　logging synchronous
　　line aux 0
　　exec-timeout 0 0
　　privilege level 15
　　logging synchronous
　　line vty 0 4
　　login local
　　!
　　!
　　end
　　----------------------
　　2、配置默认路由后的输出:
　　config term
　　Enter configuration commands, one per line.  End with CNTL/Z.
　　R1(config)#ip route 0.0.0.0 0.0.0.0 192.168.60.129
　　R1(config)#end
　　R1#
　　3、查看路由条目:
　　Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
　　D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
　　N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
　　E1 - OSPF external type 1, E2 - OSPF external type 2
　　i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
　　ia - IS-IS inter area, * - candidate default, U - per-user static route
　　o - ODR, P - periodic downloaded static route
　　Gateway of last resort is 192.168.60.129 to network 0.0.0.0
　　C    192.168.60.0/24 is directly connected, FastEthernet0/0
　　S*   0.0.0.0/0 [1/0] via 192.168.60.129
　　Process finished with exit code 0