LVS+Keepalived实现高可用

zsy001

　　LVS可以实现负载均衡，但是不能够进行健康检查，比如一个rs出现故障，LVS 仍然会把请求转发给故障的rs服务器，这样就会导致请求的无效性。keepalive 软件可以进行健康检查，而且能同时实现 LVS 的高可用性，解决 LVS 单点故障的问题，其实 keepalive 就是为 LVS 而生的。
　　LVS-DR+Keepalived
　　一、实验环境：

Keepalived1 + lvs1(Director1)：192.168.0.48
Keepalived2 + lvs2(Director2)：192.168.0.58
Real server1：192.168.0.18
Real server2：192.168.0.28
VIP: 192.168.0.38
　　二、安装系统软件

LB+LVS+Keepalived的两个节点
yum install ipvsadm keepalived -y
RS+Nginx的两个节点
yum install epel-release -y
yum install nginx -y
chkconfig nginx on
service nginx start
　　三、设置配置脚本

两个RS节点
# vim /usr/local/sbin/lvs_dr_rs.sh
#! /bin/bash
vip=192.168.0.38
ifconfig lo:0 $vip broadcast $vip netmask 255.255.255.255 up
route add -host $vip lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
2节点rs 上分别执行脚本：
bash /usr/local/sbin/lvs_dr_rs.sh
两个keepalived节点：
Master节点：
vim /etc/keepalived/keepalived.conf
vrrp_instance VI_1 {
state MASTER
interface eth0
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.38
}
}
virtual_server 192.168.0.38 80 {
delay_loop 6
lb_algo rr
lb_kind DR
persistence_timeout 0
protocol TCP
real_server 192.168.0.18 80 {
weight 1
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.0.28 80 {
weight 1
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
backup节点：
vim /etc/keepalived/keepalived.conf
vrrp_instance VI_1 {
state BACKUP
interface eth0
virtual_router_id 51
priority 90
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.38
}
}
virtual_server 192.168.0.38 80 {
delay_loop 6
lb_algo rr
lb_kind DR
persistence_timeout 0
protocol TCP
real_server 192.168.0.18 80 {
weight 1
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.0.28 80 {
weight 1
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
keepalived的2个节点执行如下命令，开启转发功能：
# echo 1 > /proc/sys/net/ipv4/ip_forward
先主后从分别启动keepalive
service keepalived start
　　三、验证结果
1、访问VIP，轮询到两个后端web服务器。
2、LVS主节点挂了，不影响服务的正常运行。