Cisco Catalyst 3550-EMI配置清单

formatuu

Building configuration...
Current configuration : 4055 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname office
!
enable secret 5 $1$p0fU$JeyPOM0RuL.Fqfe71efHF1
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
!
interface FastEthernet0/1
switchport access vlan 10
!--将端口FastEthernet0/1指定至VLAN 10
no ip address
!
interface FastEthernet0/2
switchport access vlan 10
no ip address
!
interface FastEthernet0/3
switchport access vlan 10
no ip address
!
interface FastEthernet0/4
switchport access vlan 10
no ip address
!
interface FastEthernet0/5
switchport access vlan 10
no ip address
!
interface FastEthernet0/6
switchport access vlan 20
no ip address
!--将端口FastEthernet0/6指定至VLAN 20
!interface FastEthernet0/7
switchport access vlan 20
no ip address
!
interface FastEthernet0/8
switchport access vlan 20
no ip address
!
interface FastEthernet0/9
switchport access vlan 20
no ip address
!
interface FastEthernet0/10
switchport access vlan 20
no ip address
!
interface FastEthernet0/11
switchport access vlan 30
no ip address
!--将端口FastEthernet0/6指定至VLAN 30
!
interface FastEthernet0/12
switchport access vlan 30
no ip address
!
interface FastEthernet0/13
switchport access vlan 30
no ip address
!
interface FastEthernet0/14
switchport access vlan 30
no ip address
!
nterface FastEthernet0/15
switchport access vlan 30
no ip address
!
interface FastEthernet0/16
switchport access vlan 30
no ip address
!
interface FastEthernet0/17
switchport access vlan 30
no ip address
!
interface FastEthernet0/18
switchport access vlan 30
no ip address
!
interface FastEthernet0/19
switchport access vlan 40
ip address
!--将端口FastEthernet0/6指定至VLAN 40
!interface FastEthernet0/20
witchport access vlan 40
no ip address
!
interface FastEthernet0/21
switchport access vlan 40
no ip address
!
interface FastEthernet0/22
switchport access vlan 30
no ip address
!
interface FastEthernet0/23
switchport access vlan 40
no ip address
!
interface FastEthernet0/24
switchport access vlan 40
no ip address
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
！--启用802.1Q Trunk封装协议，即在该端口创建Trunk
switchport trunk allowed vlan 1-80
！--允许vlan 1-80在该中继线通讯
itchport mode trunk
！--将该端口设置为Trunk
no ip address
!
interface GigabitEthernet0/2
no ip address
!
interface Vlan1
ip address 172.16.100.12 255.255.255.0
!--LAN1指定IP地址
no ip route-cache
no ip mroute-cache
!
ip classless
ip http server
!
!
!
!
line con 0
line vty 0 4
password aaa
login
line vty 5 15
login
!
end


Cisco Catalyst 3550-SMI配置清单

Building configuration...
Current configuration : 4055 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname office
!
enable secret 5 $1$p0fU$JeyPOM0RuL.Fqfe71efHF1
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
!
interface FastEthernet0/1
switchport access vlan 60
!--将端口FastEthernet0/1指定至VLAN 60
no ip address
!
interface FastEthernet0/2
switchport access vlan 60
no ip address
!
interface FastEthernet0/3
switchport access vlan 60
no ip address
!
interface FastEthernet0/4
switchport access vlan 60
no ip address
!
interface FastEthernet0/5
switchport access vlan 60
no ip address
!
interface FastEthernet0/6
switchport access vlan 20
no ip address
!--将端口FastEthernet0/6指定至VLAN 20
!interface FastEthernet0/7
switchport access vlan 20
no ip address
!
interface FastEthernet0/8
switchport access vlan 20
no ip address
!
interface FastEthernet0/9
switchport access vlan 20
no ip address
!
interface FastEthernet0/10
switchport access vlan 20
no ip address
!
interface FastEthernet0/11
switchport access vlan 80
no ip address
!--将端口FastEthernet0/6指定至VLAN 80
!
interface FastEthernet0/12
switchport access vlan 80
no ip address
!
interface FastEthernet0/13
switchport access vlan 80
no ip address
!
interface FastEthernet0/14
switchport access vlan 80
no ip address
!
interface FastEthernet0/15
switchport access vlan 80
no ip address
interface FastEthernet0/16
switchport access vlan 80
no ip address
!
interface FastEthernet0/17
switchport access vlan 80
no ip address
!
interface FastEthernet0/18
switchport access vlan 80
no ip address
!
interface FastEthernet0/19
switchport access vlan 80
no ip address
!--将端口FastEthernet0/6指定至VLAN 80
!interface FastEthernet0/20
switchport access vlan 80
no ip address
!
interface FastEthernet0/21
switchport access vlan 80
no ip address
!
interface FastEthernet0/22
switchport access vlan 80
no ip address
!
interface FastEthernet0/23
switchport access vlan 80
no ip address
!
interface FastEthernet0/24
switchport access vlan 80
no ip address
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
！--启用802.1Q Trunk封装协议，即在该端口创建Trunk
switchport trunk allowed vlan 1-80
！--允许vlan 1-80在该中继线通讯
switchport mode trunk
！--从将该端口设置为Trunk
no ip address
!
interface GigabitEthernet0/2
no ip address
!
interface Vlan1
ip address 172.16.100.13 255.255.255.0
!--为LAN1指定IP地址
no ip route-cache
no ip mroute-cache
!
ip classless
ip http server
!
!
!
!
line con 0
line vty 0 4
password aaa
login
line vty 5 15
login
!
end



Catalyst 3550-12T交换机配置：



Enable
Configure terminal
service pad
service password-encryption
hostname c3550-12t
enable password 123456
enable secret 654321
ip subnet-zero
ip name-server 172.16.8.1. 172.16.8.2
ip routing
exit
vlan database
vtp mode server
vtp domain centervtp
vlan 2 name vlan2
vlan 3 name vlan3
vlan 4 name vlan4
vlan 5 name vlan5
vlan 6 name vlan6
vlan 7 name vlan7
vlan 8 name vlan8
vlan 9 name vlan9
exit
configure terminal
interface port-channel 1
interface gigabitethernet 0/1
channel-group 1
interface gigabitethernet 0/2
channel-group 1
exit
interface gigabitethernet 0/1
switchport mode trunk
switchport encapsulation dotlq
swithchport trunk allowed vlan all
interface gigabitethernet 0/3
switchport mode trunk
switchport trunk encapsulation dotlq
swithcport trunk allowed vlan all
interface gigabitethernet 0/4
switchport mode trunk
switchport trunk encapsulation dotlq
switchport trunk allowed vlan all
interface gigabitethernet 0/5
switchport mode trunk
switchport trunk encapsulation dotlq
switchport trunk allowed vlan all
interface gigabitethernet 0/6
switchport mode trunk
switchport trunk encapsulation dotlq
switchport trunk allowed vlan all
interface gigabitethernet 0/7
switchport access vlan 9
no shutdown
interface range gigabitethernet 0/8 – 10
switchport mode access
switchport access vlan 8
no shutdown
spanning-tree portfast
interface gigabitethernet 0/11
switchport mode trunk
switchport trunk encapsulation dotlq
swithcprot trunk allowed vlan all
interface gigabitethernet 0/12
switchport mode trunk
switchport trunk encapsulation dotlq
switchport trunk allowed vlan all
spanning-tree vlan 1-9 root secondary
spanning-tree backbonefast
interface vlan 1
ip address 172.16.1.8 255.255.255.0
no shutdown
standby 1 ip 172.16.1.9
standby 1 priority 100 preempt
interface vlan 2
ip address 172.16.2.253 255.255.255.0
no shutdown
standby 2 ip 172.16.2.254
standby 2 priority 100 preempt
interface vlan 3
ip address 172.16.3.253 255.255.255.0
not shutdown
standby 3 ip 172.16.3.254
standby 3 priority 100 preempt
interface vlan 4
ip address 172.16.4.253 255.255.255.0
no shutdown
standby 4 ip 172.16.4.254
standby 4 priority 100 preempt
interface vlan 5
ip addess 172.16.5.253 255.255.255.0
no shutdown
standby 5 ip 172.16.5.253
standby 5 priority 100 preempt
interface vlan 6
ip address 172.16.6.253 255.255.255.0
no shutdown
standby 6 ip 172.16.6.254
standby 6 priority 100 preempt
interface vlan 7
ip address 172.16.7.253 255.255.255.0
no shutdown
standby 7 ip 172.16.7.254
standby 7 priority 100 preempt
interface vlan 8
ip address 172.16.8.253 255.255.255.0
no shutdown
standby 8 ip 172.16.8.254
standby 8 priority 100 preempt
interface vlan 9
ip address 172.16.9.253 255.255.255.0
no shutdown
standby 9 ip 172.16.9.254
standby 9 priority 100 preempt
exit
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.9.250
ip http server
line con 0
line aux 0
line vty 0 15
password 12345678
login
end

其它交换机配置类似。