设为首页 收藏本站
查看: 676|回复: 0

[经验分享] php 裁剪图片类

[复制链接]

尚未签到

发表于 2015-8-27 13:25:44 | 显示全部楼层 |阅读模式
<?php
/*
*说明:函数功能是把一个图像裁剪为任意大小的图像,图像不变形
* 参数说明:输入 需要处理图片的 文件名,生成新图片的保存文件名,生成新图片的宽,生成新图片的高
* written by smallchicken
* time 2008-12-18
*/
// 获得任意大小图像,不足地方拉伸,不产生变形,不留下空白
function my_image_resize($src_file, $dst_file , $new_width , $new_height) {
if($new_width <1 || $new_height <1) {
echo "params width or height error !";
exit();
}
if(!file_exists($src_file)) {
echo $src_file . " is not exists !";
exit();
}
// 图像类型
$type=exif_imagetype($src_file);
$support_type=array(IMAGETYPE_JPEG , IMAGETYPE_PNG , IMAGETYPE_GIF);
if(!in_array($type, $support_type,true)) {
echo "this type of image does not support! only support jpg , gif or png";
exit();
}
//Load image
switch($type) {
case IMAGETYPE_JPEG :
$src_img=imagecreatefromjpeg($src_file);
break;
case IMAGETYPE_PNG :
$src_img=imagecreatefrompng($src_file);
break;
case IMAGETYPE_GIF :
$src_img=imagecreatefromgif($src_file);
break;
default:
echo "Load image error!";
exit();
}
$w=imagesx($src_img);
$h=imagesy($src_img);
$ratio_w=1.0 * $new_width / $w;
$ratio_h=1.0 * $new_height / $h;
$ratio=1.0;
// 生成的图像的高宽比原来的都小,或都大 ,原则是 取大比例放大,取大比例缩小(缩小的比例就比较小了)
if( ($ratio_w < 1 && $ratio_h < 1) || ($ratio_w > 1 && $ratio_h > 1)) {
if($ratio_w < $ratio_h) {
$ratio = $ratio_h ; // 情况一,宽度的比例比高度方向的小,按照高度的比例标准来裁剪或放大
}else {
$ratio = $ratio_w ;
}
// 定义一个中间的临时图像,该图像的宽高比 正好满足目标要求
$inter_w=(int)($new_width / $ratio);
$inter_h=(int) ($new_height / $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
imagecopy($inter_img, $src_img, 0,0,0,0,$inter_w,$inter_h);
// 生成一个以最大边长度为大小的是目标图像$ratio比例的临时图像
// 定义一个新的图像
$new_img=imagecreatetruecolor($new_width,$new_height);
imagecopyresampled($new_img,$inter_img,0,0,0,0,$new_width,$new_height,$inter_w,$inter_h);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存储图像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
} // end if 1
// 2 目标图像 的一个边大于原图,一个边小于原图 ,先放大平普图像,然后裁剪
// =if( ($ratio_w < 1 && $ratio_h > 1) || ($ratio_w >1 && $ratio_h <1) )
else{
$ratio=$ratio_h>$ratio_w? $ratio_h : $ratio_w; //取比例大的那个值
// 定义一个中间的大图像,该图像的高或宽和目标图像相等,然后对原图放大
$inter_w=(int)($w * $ratio);
$inter_h=(int) ($h * $ratio);
$inter_img=imagecreatetruecolor($inter_w , $inter_h);
//将原图缩放比例后裁剪
imagecopyresampled($inter_img,$src_img,0,0,0,0,$inter_w,$inter_h,$w,$h);
// 定义一个新的图像
$new_img=imagecreatetruecolor($new_width,$new_height);
imagecopy($new_img, $inter_img, 0,0,0,0,$new_width,$new_height);
switch($type) {
case IMAGETYPE_JPEG :
imagejpeg($new_img, $dst_file,100); // 存储图像
break;
case IMAGETYPE_PNG :
imagepng($new_img,$dst_file,100);
break;
case IMAGETYPE_GIF :
imagegif($new_img,$dst_file,100);
break;
default:
break;
}
}// if3
}// end function
?>
  第二个方法:



<?php
/*
图片处理类:缩略,裁剪,圆角,倾斜
*/
class resizeimage
{
//图片类型
var $type;
//实际宽度
var $width;
//实际高度
var $height;
//改变后的宽度
var $resize_width;
//改变后的高度
var $resize_height;
//是否裁图
var $cut;
//源图象
var $srcimg;
//目标图象地址
var $dstimg;
//圆角源
var $corner;
var $im;
function resizeimage($img, $corner, $wid, $hei,$c, $corner_radius, $angle)
{
$this->srcimg = $img;
$this->corner = $corner;
$this->resize_width = $wid;
$this->resize_height = $hei;
$this->cut = $c;
$this->corner_radius = $corner_radius;
$this->angle = $angle;
//图片的类型
$this->type = substr(strrchr($this->srcimg,"."),1);
//初始化图象
$this->initi_img();
//目标图象地址
$this -> dst_img();
//--
$this->width = imagesx($this->im);
$this->height = imagesy($this->im);
//生成图象
$this->newimg();
ImageDestroy ($this->im);
}
function newimg()
{
//改变后的图象的比例
$resize_ratio = ($this->resize_width)/($this->resize_height);
//实际图象的比例
$ratio = ($this->width)/($this->height);
if(($this->cut)=="1")
//裁图
       {
if($ratio>=$resize_ratio)
//高度优先
           {
$newimg = imagecreatetruecolor($this->resize_width,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width,$this->resize_height, (($this->height)*$resize_ratio), $this->height);
$tmp = $this->rounded_corner($newimg,$this->resize_width);
imagepng ($tmp,$this->dstimg);
}
if($ratio<$resize_ratio)
//宽度优先
           {
$newimg = imagecreatetruecolor($this->resize_width,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width, $this->resize_height, $this->width, (($this->width)/$resize_ratio));
$tmp = $this->rounded_corner($newimg);
imagepng ($tmp,$this->dstimg);
}
}
else
//不裁图
       {
if($ratio>=$resize_ratio)
{
$newimg = imagecreatetruecolor($this->resize_width,($this->resize_width)/$ratio);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, $this->resize_width, ($this->resize_width)/$ratio, $this->width, $this->height);
ImageJpeg ($newimg,$this->dstimg);
}
if($ratio<$resize_ratio)
{
$newimg = imagecreatetruecolor(($this->resize_height)*$ratio,$this->resize_height);
imagecopyresampled($newimg, $this->im, 0, 0, 0, 0, ($this->resize_height)*$ratio, $this->resize_height, $this->width, $this->height);
ImageJpeg ($newimg,$this->dstimg);
}
}
}
//初始化图象
function initi_img()
{
if($this->type=="jpg")
{
$this->im = imagecreatefromjpeg($this->srcimg);
}
if($this->type=="gif")
{
$this->im = imagecreatefromgif($this->srcimg);
}
if($this->type=="png")
{
$this->im = imagecreatefrompng($this->srcimg);
}
}
//处理圆角
function rounded_corner($image,$size)
{
$this->angle = 0;
$topleft = true;
$bottomleft = true;
$bottomright = true;
$topright = true;
$corner_source = imagecreatefrompng('rounded_corner.png');
$corner_width = imagesx($corner_source);  
$corner_height = imagesy($corner_source);  
$corner_resized = ImageCreateTrueColor($this->corner_radius, $this->corner_radius);
ImageCopyResampled($corner_resized, $corner_source, 0, 0, 0, 0, $this->corner_radius, $this->corner_radius, $corner_width, $corner_height);
$corner_width = imagesx($corner_resized);  
$corner_height = imagesy($corner_resized);  
$white = ImageColorAllocate($image,255,255,255);
$black = ImageColorAllocate($image,0,0,0);
//顶部左圆角
if ($topleft == true) {
$dest_x = 0;  
$dest_y = 0;  
imagecolortransparent($corner_resized, $black);
imagecopymerge($image, $corner_resized, $dest_x, $dest_y, 0, 0, $corner_width, $corner_height, 100);
}
//下部左圆角
if ($bottomleft == true) {
$dest_x = 0;  
$dest_y = $size - $corner_height;
$rotated = imagerotate($corner_resized, 90, 0);
imagecolortransparent($rotated, $black);
imagecopymerge($image, $rotated, $dest_x, $dest_y, 0, 0, $corner_width, $corner_height, 100);  
}
//下部右圆角
if ($bottomright == true) {
$dest_x = $size - $corner_width;  
$dest_y = $size - $corner_height;  
$rotated = imagerotate($corner_resized, 180, 0);
imagecolortransparent($rotated, $black);
imagecopymerge($image, $rotated, $dest_x, $dest_y, 0, 0, $corner_width, $corner_height, 100);  
}
//顶部右圆角
if ($topright == true) {
$dest_x = $size - $corner_width;  
$dest_y = 0;
$rotated = imagerotate($corner_resized, 270, 0);
imagecolortransparent($rotated, $black);
imagecopymerge($image, $rotated, $dest_x, $dest_y, 0, 0, $corner_width, $corner_height, 100);  
}
$image = imagerotate($image, $this->angle, $white);
return $image;
}
//图象目标地址
function dst_img()
{
$full_length = strlen($this->srcimg);
$type_length = strlen($this->type);
$name_length = $full_length-$type_length;
$name         = substr($this->srcimg,0,$name_length-1);
$this->dstimg = $name."_small.png";
}
}
//resizeimage("图片地址", "处理后的宽度", "处理后的高度", "是否裁剪", "圆角度数", "倾斜度");
$img_file = 'Sunset.jpg';
$corner = 'rounded_corner.png';
$resizeimage = new resizeimage($img_file, $corner, "80", "80", "1", "6", "0");
?>
<img src="Sunset_small.png" border="0">
  

运维网声明 1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com

所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其承担任何法律责任,如涉及侵犯版权等问题,请您及时通知我们,我们将立即处理,联系人Email:kefu@iyunv.com,QQ:1061981298 本贴地址:https://www.yunweiku.com/thread-105078-1-1.html 上篇帖子: 零基础学php的自学 下篇帖子: PHP版单点登陆实现方案(原创by桂桂)
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

扫码加入运维网微信交流群X

扫码加入运维网微信交流群

扫描二维码加入运维网微信交流群,最新一手资源尽在官方微信交流群!快快加入我们吧...

扫描微信二维码查看详情

客服E-mail:kefu@iyunv.com 客服QQ:1061981298


QQ群⑦:运维网交流群⑦ QQ群⑧:运维网交流群⑧ k8s群:运维网kubernetes交流群


提醒:禁止发布任何违反国家法律、法规的言论与图片等内容;本站内容均来自个人观点与网络等信息,非本站认同之观点.


本站大部分资源是网友从网上搜集分享而来,其版权均归原作者及其网站所有,我们尊重他人的合法权益,如有内容侵犯您的合法权益,请及时与我们联系进行核实删除!



合作伙伴: 青云cloud

快速回复 返回顶部 返回列表