#####....此处省略1w字
making links in apps...
make[1]: Entering directory `/root/src/openssl-1.0.1i/apps'
make[1]: Nothing to be done for `links'.
make[1]: Leaving directory `/root/src/openssl-1.0.1i/apps'
making links in test...
make[1]: Entering directory `/root/src/openssl-1.0.1i/test'
make[1]: Nothing to be done for `links'.
make[1]: Leaving directory `/root/src/openssl-1.0.1i/test'
making links in tools...
make[1]: Entering directory `/root/src/openssl-1.0.1i/tools'
make[1]: Nothing to be done for `links'.
make[1]: Leaving directory `/root/src/openssl-1.0.1i/tools'
generating dummy tests (if needed)...
make[1]: Entering directory `/root/src/openssl-1.0.1i/test'
make[1]: Nothing to be done for `generate'.
make[1]: Leaving directory `/root/src/openssl-1.0.1i/test'
Configured for linux-elf. #出现这个信息的话, 就OK了, 如果报错可以Google下, 一定是缺了什么
#OK! 我们继续
[iyunv@jinyongri openssl-1.0.1i]# make && make install
####....此处又省略1w字
config.status: creating test/internal/Makefile
config.status: creating include/arch/unix/apr_private.h
config.status: executing libtool commands
rm: cannot remove `libtoolT': No such file or directory
config.status: executing default commands
#出现以上信息即可
[iyunv@jinyongri apr-1.5.1]# make && make install #开始安装
####....此处又省略1w字
/usr/bin/install -c -m 755 /root/src/apr-1.5.1/build/mkdir.sh /usr/local/apr-1.5.1/build-1
for f in make_exports.awk make_var_export.awk; do
/usr/bin/install -c -m 644 /root/src/apr-1.5.1/build/${f} /usr/local/apr-1.5.1/build-1;
done
/usr/bin/install -c -m 644 build/apr_rules.out /usr/local/apr-1.5.1/build-1/apr_rules.mk
/usr/bin/install -c -m 755 apr-config.out /usr/local/apr-1.5.1/bin/apr-1-config
#出现以上信息即可
#下面开始安装apr-util-1.5.4
[iyunv@jinyongri src]# tar -xf apr-util-1.5.4.tar.bz2
[iyunv@jinyongri src]# cd ./apr-util-1.5.4
[iyunv@jinyongri apr-util-1.5.4]# ./configure --prefix=/usr/local/apr-util-1.5.4
> --with-apr=/usr/local/apr-1.5.1/ && make && make install
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/apr-util-1.5.4/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/install -c -m 644 aprutil.exp /usr/local/apr-util-1.5.4/lib
/usr/bin/install -c -m 755 apu-config.out /usr/local/apr-util-1.5.4/bin/apu-1-config
#OK apr-util-1.5.4 安装好了,
#我们该安装httpd-2.4.10了
Starting httpd: [ OK ]
[iyunv@jinyongri httpd-2.4.10]# cat /etc/rc.d/init.d/httpd.24
#!/bin/bash
#
# httpd Startup script for the Apache HTTP Server
#
# chkconfig: - 85 15
# description: The Apache HTTP Server is an efficient and extensible
# server implementing the current HTTP standards.
# processname: httpd
# config: /etc/httpd/conf/httpd.conf
# config: /etc/sysconfig/httpd
# pidfile: /var/run/httpd/httpd.pid
#
### BEGIN INIT INFO
# Provides: httpd
# Required-Start: $local_fs $remote_fs $network $named
# Required-Stop: $local_fs $remote_fs $network
# Should-Start: distcache
# Short-Description: start and stop Apache HTTP Server
# Description: The Apache HTTP Server is an extensible server
# implementing the current HTTP standards.
### END INIT INFO
# Source function library.
. /etc/rc.d/init.d/functions
if [ -f /etc/sysconfig/httpd ]; then
. /etc/sysconfig/httpd
fi
# Start httpd in the C locale by default.
HTTPD_LANG=${HTTPD_LANG-"C"}
# This will prevent initlog from swallowing up a pass-phrase prompt if
# mod_ssl needs a pass-phrase from the user.
INITLOG_ARGS=""
# Set HTTPD=/usr/sbin/httpd.worker in /etc/sysconfig/httpd to use a server
# with the thread-based "worker" MPM; BE WARNED that some modules may not
# work correctly with a thread-based MPM; notably PHP will refuse to start.
# Path to the apachectl script, server binary, and short-form for messages.
apachectl=/usr/local/httpd24/bin/apachectl
httpd=/usr/local/httpd24/bin/httpd
prog=httpd
pidfile=/usr/local/httpd24/logs/httpd.pid
lockfile=${LOCKFILE-/var/lock/subsys/httpd}
RETVAL=0
STOP_TIMEOUT=${STOP_TIMEOUT-10}
# The semantics of these two functions differ from the way apachectl does
# things -- attempting to start while running is a failure, and shutdown
# when not running is also a failure. So we just do it the way init scripts
# are expected to behave here.
start() {
echo -n $"Starting $prog: "
LANG=$HTTPD_LANG daemon --pidfile=${pidfile} $httpd $OPTIONS
RETVAL=$?
echo
[ $RETVAL = 0 ] && touch ${lockfile}
return $RETVAL
}
# When stopping httpd, a delay (of default 10 second) is required
# before SIGKILLing the httpd parent; this gives enough time for the
# httpd parent to SIGKILL any errant children.
stop() {
echo -n $"Stopping $prog: "
killproc -p ${pidfile} -d ${STOP_TIMEOUT} $httpd
RETVAL=$?
echo
[ $RETVAL = 0 ] && rm -f ${lockfile} ${pidfile}
}
reload() {
echo -n $"Reloading $prog: "
if ! LANG=$HTTPD_LANG $httpd $OPTIONS -t >&/dev/null; then
RETVAL=6
echo $"not reloading due to configuration syntax error"
failure $"not reloading $httpd due to configuration syntax error"
else
# Force LSB behaviour from killproc
LSB=1 killproc -p ${pidfile} $httpd -HUP
RETVAL=$?
if [ $RETVAL -eq 7 ]; then
failure $"httpd shutdown"
fi
fi
echo
}
# See how we were called.
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status -p ${pidfile} $httpd
RETVAL=$?
;;
restart)
stop
start
;;
condrestart|try-restart)
if status -p ${pidfile} $httpd >&/dev/null; then
stop
start
fi
;;
force-reload|reload)
reload
;;
graceful|help|configtest|fullstatus)
$apachectl $@
RETVAL=$?
;;
*)
echo $"Usage: $prog {start|stop|restart|condrestart|try-restart|force-reload|reload|status|fullstatus|graceful|help|configtest}"
RETVAL=2
esac
[iyunv@jinyongri httpd-2.4.10]# service httpd.24 start
Starting httpd: [ OK ]
[iyunv@jinyongri httpd-2.4.10]# service httpd.24 stop
Stopping httpd: [ OK ]
QQ群⑧：
窥视卡
雷达卡
发表于 2014-10-14 10:49:04
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡