通过gitlab官网的介绍方法，一直没有安装成功，今天仔细看了一遍安装介绍，通过另一种方法安装，终于成功了！记录下。
gitlab官网：https://gitlab.com
安装系统：centos 6.5
官网安装介绍：https://about.gitlab.com/downloads/#centos6
1. Install and configure the necessary dependenciesIf you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server. On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.
sudo yum install curl openssh-server openssh-clients postfix croniesudo service postfix startsudo chkconfig postfix onsudo lokkit -s http -s ssh
2. Add the GitLab package server and install the package
curl -sS https://packages.gitlab.com/inst ... ab-ce/script.rpm.sh | sudo bashsudo yum install gitlab-ceIf you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using curl -LJO https://packages.gitlab.com/gitl ... XXX.rpm/downloadrpm -i gitlab-ce-XXX.rpm
3. Configure and start GitLab
sudo gitlab-ctl reconfigure
4. Browse to the hostname and loginOn your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen. The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.
每次执行到第二部，就卡住，安装失败。
今天仔细研究了一下，发现上面说道，如果安装不成功，可以直接复制脚本进行执行下载，下面是我复制的脚本：
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
| #!/bin/bashunknown_os ()
{ echo "Unfortunately, your operating system distribution and version are not supported by this script."
echo
echo "You can override the OS detection by setting os= and dist= prior to running this script."
echo "You can find a list of supported OSes and distributions on our website: https://packages.gitlab.com/docs#os_distro_version"
echo
echo "For example, to force CentOS 6: os=el dist=6 ./script.sh"
echo
echo "Please email support@packagecloud.io and let us know if you run into any issues."
exit 1
}curl_check ()
{ echo "Checking for curl..."
if command -v curl > /dev/null; then
echo "Detected curl..."
else
echo "Installing curl..."
yum install -d0 -e0 -y curl fi}detect_os ()
{ if [[ ( -z "${os}" ) && ( -z "${dist}" ) ]]; then
if [ -e /etc/os-release ]; then
. /etc/os-release
dist=`echo ${VERSION_ID} | awk -F '.' '{ print $1 }'`
os=${ID}
elif [ `which lsb_release 2>/dev/null` ]; then
# get major version (e.g. '5' or '6')
dist=`lsb_release -r | cut -f2 | awk -F '.' '{ print $1 }'` # get os (e.g. 'centos', 'redhatenterpriseserver', etc)
os=`lsb_release -i | cut -f2 | awk '{ print tolower($1) }'` elif [ -e /etc/oracle-release ]; then
dist=`cut -f5 --delimiter=' ' /etc/oracle-release | awk -F '.' '{ print $1 }'`
os='ol'
elif [ -e /etc/fedora-release ]; then
dist=`cut -f3 --delimiter=' ' /etc/fedora-release`
os='fedora'
elif [ -e /etc/redhat-release ]; then
os_hint=`cat /etc/redhat-release | awk '{ print tolower($1) }'` if [ "${os_hint}" = "centos" ]; then
dist=`cat /etc/redhat-release | awk '{ print $3 }' | awk -F '.' '{ print $1 }'`
os='centos'
elif [ "${os_hint}" = "scientific" ]; then
dist=`cat /etc/redhat-release | awk '{ print $4 }' | awk -F '.' '{ print $1 }'`
os='scientific'
else
dist=`cat /etc/redhat-release | awk '{ print tolower($7) }' | cut -f1 --delimiter='.'`
os='redhatenterpriseserver'
fi
else
aws=`grep -q Amazon /etc/issue` if [ "$?" = "0" ]; then
dist='6'
os='aws'
else
unknown_os fi
fi
fi
if [[ ( -z "${os}" ) || ( -z "${dist}" ) || ( "${os}" = "opensuse" ) ]]; then
unknown_os fi
# remove whitespace from OS and dist name
os="${os// /}"
dist="${dist// /}"
echo "Detected operating system as ${os}/${dist}."}main ()
{
detect_os
curl_check
yum_repo_config_url="https://packages.gitlab.com/install/repositories/gitlab/gitlab-ce/config_file.repo?os=${os}&dist=${dist}&source=script"
yum_repo_path=/etc/yum.repos.d/gitlab_gitlab-ce.repo echo "Downloading repository file: ${yum_repo_config_url}"
curl -sSf "${yum_repo_config_url}" > $yum_repo_path
curl_exit_code=$? if [ "$curl_exit_code" = "22" ]; then
echo
echo
echo -n "Unable to download repo config from: "
echo "${yum_repo_config_url}"
echo
echo "This usually happens if your operating system is not supported by "
echo "packagecloud.io, or this script's OS detection failed."
echo
echo "You can override the OS detection by setting os= and dist= prior to running this script."
echo "You can find a list of supported OSes and distributions on our website: https://packages.gitlab.com/docs#os_distro_version"
echo
echo "For example, to force CentOS 6: os=el dist=6 ./script.sh"
echo
echo "If you are running a supported OS, please email support@packagecloud.io and report this."
[ -e $yum_repo_path ] && rm $yum_repo_path
exit 1 elif [ "$curl_exit_code" = "35" ]; then
echo
echo "curl is unable to connect to packagecloud.io over TLS when running: "
echo " curl ${yum_repo_config_url}"
echo
echo "This is usually due to one of two things:"
echo
echo " 1.) Missing CA root certificates (make sure the ca-certificates package is installed)"
echo " 2.) An old version of libssl. Try upgrading libssl on your system to a more recent version"
echo
echo "Contact support@packagecloud.io with information about your system for help."
[ -e $yum_repo_path ] && rm $yum_repo_path
exit 1 elif [ "$curl_exit_code" -gt "0" ]; then
echo
echo "Unable to run: "
echo " curl ${yum_repo_config_url}"
echo
echo "Double check your curl installation and try again."
[ -e $yum_repo_path ] && rm $yum_repo_path
exit 1 else
echo "done."
fi
echo "Installing pygpgme to verify GPG signatures..."
yum install -y pygpgme --disablerepo='gitlab_gitlab-ce'
pypgpme_check=`rpm -qa | grep -qw pygpgme` if [ "$?" != "0" ]; then
echo
echo "WARNING: "
echo "The pygpgme package could not be installed. This means GPG verification is not possible for any RPM installed on your system. "
echo "To fix this, add a repository with pygpgme. Usualy, the EPEL repository for your system will have this. "
echo "More information: https://fedoraproject.org/wiki/E ... e_extra_packages.3F"
echo
# set the repo_gpgcheck option to 0
sed -i'' 's/repo_gpgcheck=1/repo_gpgcheck=0/' /etc/yum.repos.d/gitlab_gitlab-ce.repo fi
echo "Installing yum-utils..."
yum install -y yum-utils --disablerepo='gitlab_gitlab-ce'
yum_utils_check=`rpm -qa | grep -qw yum-utils` if [ "$?" != "0" ]; then
echo
echo "WARNING: "
echo "The yum-utils package could not be installed. This means you may not be able to install source RPMs or use other yum features."
echo
fi
echo "Generating yum cache for gitlab_gitlab-ce..."
yum -q makecache -y --disablerepo='*' --enablerepo='gitlab_gitlab-ce'
echo
echo "The repository is setup! You can now install packages."}
main
|
复制完成后，保存为一个shell脚本文件，执行。
执行成功后，检查是否可以通过yum search 最新的gitlab包：
如果可以，直接yum install -y gitlab-ce
安装完成后，
1
2
| cd /opt/gitlab/bin
./gitlab-ctl reconfigure
|
配置完成后就可以启动了：
1
2
| cd /opt/gitlab/bin/
./gitlab-ctl start
|
访问：http://ip
注意8080端口要用
| 
QQ群⑧：
窥视卡
雷达卡
发表于 2016-8-19 09:55:41
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡