Jetty是一个用 Java 实现、开源、基于标准的,并且具有丰富功能的 Http 服务器和 Web 容器。Jetty中应用最广泛的一项功能就是可以作为嵌入式Web容器。
在开发阶段,可以使用Jetty在Eclipse里直接启动应用,而不是像Tomcat那样繁琐,先把几十兆应用打包,然后再复制到某个目录后再启动。
在测试阶段,可以直接在测试用例中启动Jetty,而不是先将应用打包部署到容器。
在运行阶段,可以将war包配置成直接能够运行的应用
本文将着重介绍如何配置使用Jetty的嵌入式Web容器功能,关于Jetty的基本配置和功能请参考http://www.ibm.com/developerworks/cn/web/wa-lo-jetty/
一、开发阶段
1、使用maven启动Jetty
我们修改了源码的时候eclipse会自动编译,Jetty Maven Plugin插件发现编译文件有变化后会自动更新到jetty容器中,非常方便我们进行开发。
首先定义Jetty的版本属性
< properties >
< jetty.version > 8.1.9.v20130131</ jetty.version >
</ properties >
然后引入Jetty依赖
<!-- jetty -->
< dependency >
< groupId > org.eclipse.jetty.aggregate</ groupId >
< artifactId > jetty-webapp</ artifactId >
< version > ${jetty.version}</ version >
< scope > test</ scope >
</ dependency >
< dependency >
< groupId > org.eclipse.jetty</ groupId >
< artifactId > jetty-jsp</ artifactId >
< version > ${jetty.version}</ version >
< scope > test</ scope >
</ dependency >
配置Jetty Maven Plugin插件,示例如下
< plugin >
< groupId > org.mortbay.jetty</ groupId >
< artifactId > jetty-maven-plugin</ artifactId >
< version > ${jetty.version}</ version >
< configuration >
< systemProperties >
< systemProperty >
< name > spring.profiles.active</ name >
< value > development</ value >
</ systemProperty >
</ systemProperties >
< useTestClasspath > true</ useTestClasspath >
< webAppConfig >
< contextPath > /${project.artifactId}</ contextPath >
</ webAppConfig >
</ configuration >
</ plugin >
该配置运行 jetty 并指定 spring 的 profile 为development,同时设定 web 应用的上下文地址与应用本身的artifactId一致。
执行如下命令启动Jetty,即可通过http://localhost:8080/${project.artifactId}访问Web应用。
mvn jetty:run
Jetty Maven Plugin插件支持多个maven goals,最常用的就是run,下面的参数支持大部分的goals
(1)配置Jetty容器(支持所有goals)
<connectors>:可选参数,配置org.eclipse.jetty.server.Connector(Jetty端口监听器)列表,如果不指定该参数,将会连接默认的8080端口。
<jettyXml>:可选参数,指定Jetty配置文件的路径
<scanIntervalSeconds>:可选参数,配置Web应用扫描的暂停时间,Web应用扫描如果发现修改了程序,会自动重新部署。该参数默认值为0,即不启动热部署
<systemProperties>:可选参数,设置插件执行时的系统参数,比如上面的配置示例中指定了spring的profile为development,如果不设置该参数,就需要配置maven与spring的profile一致,同时在mvn命令中增加-Pdevelopment选项,或者直接在spring配置文件中设置spring.profiles.active为development
<systemPropertiesFile>:可选参数,设置系统参数配置文件的位置,将会批量执行其中的系统参数配置
<loginServices>:可选参数,配置org.eclipse.jetty.security.LoginService实现类的列表。
<requestLog>:可选参数,配置请求日志接口:org.eclipse.jetty.server.RequestLog的实现类,配置请求日志的处理格式,
比如org.mortbay.jetty.NCSARequestLog就是一个NCSA格式((美国)国家超级计算技术应用中心 (NCSA) 公用格式,是常用的标准日志格式)的实现。
(2)配置Web应用程序(不支持run-forked、stop两个goals)
<webApp>:从jetty6.1.6rc0起使用webAppConfig,web应用程序配置根节点
<contextPath>:设置web应用程序的context路径,默认情况下,它被设置成该项目的pom.xml的<artifactId>
<descriptor>:设置web应用程序主配置文件web.xml的路径,默认该配置文件位于WEB-INF目录下
<defaultsDescriptor>:设置先于web.xml执行的webdefault.xml配置文件的路径
<overrideDescriptor>:设置在web.xml读取之后执行的配置文件,使用该参数可以覆盖或增加web.xml中的配置
<tempDirectory>:Web应用的临时目录,Jetty可以在此目录编译jsp文件或者复制jar包,默认路径为${project.build.outputDirectory}/tmp
<baseResource>:指定Web应用静态资源所在的路径,默认路径为src/main/webapp
<resourceBases>:指定多个Web应用静态资源所在的路径,使用逗号分隔
<baseAppFirst>:可选参数,默认值为true,控制是否可以在Web应用的原始资源之前或之后叠加多个war包
<jettyEnvXml>:可选参数,指定jetty-env.xml配置文件的路径
<containerIncludeJarPattern>:jetty-8.1.x之后的版本可以使用,可选参数,配置加载到Jetty容器 Classloader中的Jar包的路径或匹配模式,符合条件的jar包将会被检测META-INF、资源、tld和类的继承关系
<webInfIncludeJarPattern>:jetty-8.1.x之后的版本可以使用,可选参数,配置加载到Web应用程序的Classloader(WEB-INF classpath)中的Jar包的路径或匹配模式,符合条件的jar包将会被检测META-INF、资源、tld和类的继承关系
<contextXml>:可选参数,指定context xml配置文件的路径
run goals将会启动Jetty并运行应用程序,不需要应用程序编译成war包。另外run还支持webapp节点的其它属性:
<classesDirectory>:Web应用程序类编译后的路径
<testClassesDirectory>:Web应用程序单元测试类编译后的路径,默认值为${project.build.testOutputDirectory}.
<useTestScope>:Jetty-7之前的版本参数名称为useTestClasspath,如果设置为true,开启测试模式,<testClassesDirectory>中指定的类及其依赖将首先被加载到classpath中,默认值为false
<useProvidedScope>:如果设置为true,依赖范围标示为“provided”的依赖将被加载到容器的classpath中,该参数很少使用。
<webAppSourceDirectory>:Web应用程序静态资源路径,默认值为${basedir}/src/main/webapp
<scanTargets>:配置除了插件自动扫描的位置外,其它需要扫描的目录或文件列表
<scanTargetPatterns>:配置除了插件自动扫描的位置外,其它需要扫描的目录或文件的匹配模式
<skip>:默认值为false,如果设置为true,将会停止执行插件
Jetty Maven Plugin插件支持的其它goals简介如下(详见http://wiki.eclipse.org/Jetty/Feature/Jetty_Maven_Plugin):
run-war:将Web应用程序打包成war包并部署到Jetty中。
run-exploded:使用war exploded模式(文件夹模式)将Web应用程序打包并部署到Jetty中
deploy-war:功能与run-war类似,区别就是maven生命周期中不包含package阶段
run-forked:jetty-7.5.2之后的版本可用,强迫Jetty使用一个新的JVM启动应用程序
start:jetty-7.6.0之后的版本可用,一般在配合插件中的execution节点使用,test-compile阶段之后才执行构建,确保必要的类及文件都生成好了。一般用于集成测试时启动Jetty,本文第二部分测试阶段会有详细介绍
stop:关闭运行中的Jetty容器
2、在java中启动Jetty
SpringSide4中封装了Jetty的操作提供了工具类JettyFactory ,让我们可以很简单的启动Jetty容器,JettyFactory代码如下:
/**
* Copyright (c) 2005-2012 springside.org.cn
*
* Licensed under the Apache License, Version 2.0 (the "License");
*/
package org.springside.modules.test.jetty;
import java.util.List;
import org.apache.commons.lang3.StringUtils;
import org.eclipse.jetty.server.Connector;
import org.eclipse.jetty.server.Server;
import org.eclipse.jetty.server.nio.SelectChannelConnector;
import org.eclipse.jetty.webapp.WebAppClassLoader;
import org.eclipse.jetty.webapp.WebAppContext;
import com.google.common.collect.Lists;
/**
* 创建Jetty Server的工厂类.
*
* @author calvin
*/
public class JettyFactory {
private static final String DEFAULT_WEBAPP_PATH = "src/main/webapp";
private static final String WINDOWS_WEBDEFAULT_PATH = "jetty/webdefault-windows.xml";
/**
* 创建用于开发运行调试的Jetty Server, 以src/main/webapp为Web应用目录.
*/
public static Server createServerInSource(int port, String contextPath) {
Server server = new Server();
// 设置在JVM退出时关闭Jetty的钩子。
server.setStopAtShutdown(true );
SelectChannelConnector connector = new SelectChannelConnector();
connector.setPort(port);
// 解决Windows下重复启动Jetty居然不报告端口冲突的问题.
connector.setReuseAddress(false );
server.setConnectors(new Connector[] { connector });
WebAppContext webContext = new WebAppContext(DEFAULT_WEBAPP_PATH, contextPath);
// 修改webdefault.xml,解决Windows下Jetty Lock住静态文件的问题.
webContext.setDefaultsDescriptor(WINDOWS_WEBDEFAULT_PATH);
server.setHandler(webContext);
return server;
}
/**
* 设置除jstl-*.jar外其他含tld文件的jar包的名称.
* jar名称不需要版本号,如sitemesh, shiro-web
*/
public static void setTldJarNames(Server server, String... jarNames) {
WebAppContext context = (WebAppContext) server.getHandler();
List<String> jarNameExprssions = Lists.newArrayList(".*/jstl-[^/]*\\.jar$", ".*/.*taglibs[^/]*\\.jar$");
for (String jarName : jarNames) {
jarNameExprssions.add(".*/" + jarName + "-[^/]*\\.jar$");
}
context.setAttribute("org.eclipse.jetty.server.webapp.ContainerIncludeJarPattern",
StringUtils.join(jarNameExprssions, '|'));
}
/**
* 快速重新启动application,重载target/classes与target/test-classes.
*/
public static void reloadContext(Server server) throws Exception {
WebAppContext context = (WebAppContext) server.getHandler();
System.out.println("[INFO] Application reloading");
context.stop();
WebAppClassLoader classLoader = new WebAppClassLoader(context);
classLoader.addClassPath("target/classes");
classLoader.addClassPath("target/test-classes");
context.setClassLoader(classLoader);
context.start();
System.out.println("[INFO] Application reloaded");
}
}
JettyFactory包含三个方法
createServerInSource:以src/main/webapp为Web应用目录创建Jetty WebServer,确保jvm退出时关闭Jetty,在同一个端口启动多个jetty时报告端口冲突,并解决了javascript、css等静态文件被jetty锁定而不能修改的问题。
setTldJarNames:J etty,tomcat等web容器通常都会对classloader做扩展, Jetty 中的org.mortbay.jetty.webapp.WebAppClassLoader负责加载一个 Web 应用context中的应用类。
Jetty的jsp处理引擎来自于Glassfish,要求JSF标签必须位于Jetty容器的classpath中,不能位于Web应用的classpath中,而Jetty的WebAppClassLoader优先使用父classloader加载类,导致tld文件都被加载到父classloader中,在Jetty的classpath中根本扫描不到,所以会出现找不到tld文件的情况。setTldJarNames方法可以设置将包含tld的jar包加载到Jetty的classpath中。
reloadContext:重新加载 Jetty 的 context
调用JettyFactory在Jetty中运行调试Maven Web应用的示例代码如下:
package org.springside.examples.quickstart;
import org.eclipse.jetty.server.Server;
import org.springside.modules.test.jetty.JettyFactory;
import org.springside.modules.test.spring.Profiles;
/**
* 使用Jetty运行调试Web应用, 在Console输入回车快速重新加载应用.
*
* @author calvin
*/
public class QuickStartServer {
public static final int PORT = 8080;
public static final String CONTEXT = "/quickstart";
public static final String[] TLD_JAR_NAMES = new String[] { "sitemesh", "spring-webmvc", "shiro-web",
"springside-core" };
public static void main(String[] args) throws Exception {
// 设定Spring的profile
Profiles.setProfileAsSystemProperty(Profiles.DEVELOPMENT);
// 启动Jetty
Server server = JettyFactory.createServerInSource(PORT, CONTEXT);
JettyFactory.setTldJarNames(server, TLD_JAR_NAMES);
try {
server.start();
System.out.println("[INFO] Server running at http://localhost:" + PORT + CONTEXT);
System.out.println("[HINT] Hit Enter to reload the application quickly");
// 等待用户输入回车重载应用.
while (true ) {
char c = (char ) System.in.read();
if (c == '\n') {
JettyFactory.reloadContext(server);
}
}
} catch (Exception e) {
e.printStackTrace();
System.exit(-1);
}
}
}
上段代码还提供了通过捕获在 console 中输入的回车自动重新载入上下文,并重新载入Class文件,提高了响应速度。
二、测试阶段
在功能测试或集成测试阶段,希望在测试开始时自动运行Jetty加载项目进行测试,测试完成时停止Jetty容器。Jetty Maven Plugin插件可以帮助我们完成这种自动化工作。配置示例如下:
< plugin >
< groupId > org.mortbay.jetty</ groupId >
< artifactId > jetty-maven-plugin</ artifactId >
< configuration >
< scanIntervalSeconds > 10</ scanIntervalSeconds >
< stopKey > foo</ stopKey >
< stopPort > 9999</ stopPort >
</ configuration >
< executions >
< execution >
< id > start-jetty</ id >
< phase > pre-integration-test</ phase >
< goals >
< goal > start</ goal >
</ goals >
< configuration >
< scanIntervalSeconds > 0</ scanIntervalSeconds >
< daemon > true</ daemon >
</ configuration >
</ execution >
< execution >
< id > stop-jetty</ id >
< phase > post-integration-test</ phase >
< goals >
< goal > stop</ goal >
</ goals >
</ execution >
</ executions >
</ plugin >
在上述配置中,通过execution来自定义运行阶段:
在pre-integration-test阶段运行start goals启动Jetty容器
在post-integration-test阶段运行stop goals停止Jetty容器。
使用<daemon>true</daemon>配置选项来预防Jetty无限期运行,迫使它只在执行Maven时才运行。
三、运行阶段
为了能够创建可以直接运行的war包,需要把jetty jar包解开,将其中的class直接编译到war包中,并需要在war中提供一个可以创建并运行Jetty的Main方法。本文提供两种实现方法:
方法一
SpringSide4 中提供了一种实现方法,稍加修改优化后步骤如下:
1、使用maven-assembly-plugin重新打包
maven-assembly-plugin插件能将应用程序打包成指定格式的分发包,更重要的是能够自定义包含/排除指定的目录或文件。
为方便操作,单独建立一个Maven Profile用于打包,配置如下:
< profile >
< id > standalone</ id >
< build >
< plugins >
< plugin >
< groupId > org.apache.maven.plugins</ groupId >
< artifactId > maven-assembly-plugin</ artifactId >
< executions >
< execution >
< phase > package</ phase >
< goals >
< goal > single</ goal >
</ goals >
< configuration >
< descriptors >
< descriptor > assembly-standalone.xml</ descriptor >
</ descriptors >
< archive >
< manifest >
< mainClass > org.springside.examples.showcase.Main</ mainClass >
</ manifest >
</ archive >
</ configuration >
</ execution >
</ executions >
</ plugin >
</ plugins >
</ build >
</ profile >
上述配置中,通过execution配置打包操作在package阶段开始,引入assembly-standalone.xml文件定义打包的规则,配置archive修改war包中的META-INF/Manifest.mf,替换main class为org.springside.examples.showcase.Main。
assembly-standalone.xml中的配置如下:
<? xml version="1.0" encoding="UTF-8" ?>
< assembly xmlns ="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2" xmlns:xsi ="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2 http://maven.apache.org/xsd/assembly-1.1.2.xsd" >
< id > standalone</ id >
< formats >
< format > war</ format >
</ formats >
< includeBaseDirectory > false</ includeBaseDirectory >
< dependencySets >
< dependencySet >
< outputDirectory > /</ outputDirectory >
< includes >
< include > org.eclipse.jetty*:*</ include >
</ includes >
< scope > provided</ scope >
< unpack > true</ unpack >
< unpackOptions >
< excludes >
< exclude > *</ exclude >
< exclude > META-INF/*</ exclude >
< exclude > about_files/*</ exclude >
</ excludes >
</ unpackOptions >
</ dependencySet >
</ dependencySets >
< fileSets >
< fileSet >
< directory > ${project.basedir}/target/${project.build.finalName}</ directory >
< outputDirectory > /</ outputDirectory >
< excludes >
< exclude > META-INF/**/*</ exclude >
</ excludes >
</ fileSet >
< fileSet >
< directory > ${project.basedir}/target/classes</ directory >
< includes >
< include > **/*/Main.class</ include >
</ includes >
< outputDirectory > /</ outputDirectory >
</ fileSet >
</ fileSets >
</ assembly >
assembly-standalone.xml涉及到几个关键点:
formats指定打包的格式为war
includeBaseDirectory为false表示创建的压缩包不使用应用程序的名称创建根目录
dependencySets用来定义选择依赖并定义最终打包到什么目录,这里我们通过include设置打包过程中包含Jetty的所有jar包,unpack设置将Jetty的jar包解压缩,unpackOptions中的exclude将根目录、META-INF、about_files里的内容排除,避免签名冲突同时减小war包的大小
fileSets允许用户通过文件或目录的粒度来控制打包,这里第一个fileSet指定将${project.basedir}/target/${project.build.finalName}中的所有静态资源打包到根目录下,并排除META-INF目录下的所有文件,第二个fileSet将${project.basedir}/target/classes中的所有class及配置文件打包到根目录下,并将org.springside.examples.showcase.Main编译后的Main.class添加到war包中
2、使用代码创建Jetty容器
package org.springside.examples.quickstart;
import java.io.File;
import java.net.URL;
import java.security.ProtectionDomain;
import org.eclipse.jetty.server.Server;
import org.eclipse.jetty.webapp.WebAppContext;
/**
* Main Class for standalone running.
*
* @author calvin
*/
public class Main {
public static void main(String[] args) throws Exception {
String contextPath = "/";
int port = Integer.getInteger("port", 8080);
Server server = createServer(contextPath, port);
try {
server.start();
server.join();
} catch (Exception e) {
e.printStackTrace();
System.exit(100);
}
}
private static Server createServer(String contextPath, int port) {
// use Eclipse JDT compiler
System.setProperty("org.apache.jasper.compiler.disablejsr199", "true");
Server server = new Server(port);
server.setStopAtShutdown(true );
ProtectionDomain protectionDomain = Main.class .getProtectionDomain();
URL location = protectionDomain.getCodeSource().getLocation();
String warFile = location.toExternalForm();
WebAppContext context = new WebAppContext(warFile, contextPath);
context.setServer(server);
// 设置work dir,war包将解压到该目录,jsp编译后的文件也将放入其中。
String currentDir = new File(location.getPath()).getParent();
File workDir = new File(currentDir, "work");
context.setTempDirectory(workDir);
server.setHandler(context);
return server;
}
}
createServer方法负责创建Jetty服务,获取war包路径,创建context及工作目录
main方法负责调用createServer方法创建Jetty服务,设置上下文路径及启动端口,并启动Jetty服务,另外如果war包所在的路径包含中文,则获取路径的代码应修改为:
ProtectionDomain protectionDomain = Main.class .getProtectionDomain();
URL location = protectionDomain.getCodeSource().getLocation();
location = java.net.URLDecoder.decode(location , "utf-8");
3 、注意事项
通过以上配置,已经可以在Web应用程序内嵌入Jetty容器了,但还需要注意以下几点
Maven Pom中的Jetty依赖注意scope修改为provided,防止Jetty的Jar包被打到WEB-INF/lib中。
如果需要解析jsp页面,需要在依赖中加入jsp-2.1-glassfish包的引用,注意其scope不能设置为provided
< dependency >
< groupId > org.mortbay.jetty</ groupId >
< artifactId > jsp-2.1-glassfish</ artifactId >
< version > 2.1.v20100127</ version >
</ dependency >
由于Jetty只会在容器的classpath中寻找jstl tags,所以需要注意将jstl包拆包到Jetty容器的classpath中,但是jetty-7 (7.6.9)、jetty-8 (8.1.9)、jetty-9 (9.0.0.M4)之后的版本内嵌了jstl包,不需要添加jstl包。
4、运行
执行如下命令将Web应用打包成war包,在${project.basedir}/target目录下将会生成嵌入Jetty容器的war包。
mvn package -Pstandalone
通过如下命令运行war包。
Java -Xms2048m -Xmx2048m -XX:MaxPermSize=128m -jar xxx.war
方法二
方法一中主要是使用了maven-assembly-plugin进行自定义打包,除此之外还可以使用maven-war-plugin、maven-antrun-plugin、maven-dependency-plugin、maven-compiler-plugin共同实现创建可执行的 war 包
Maven POM配置示例如下:
< profile >
< id > standalone</ id >
< build >
< finalName > quickstart</ finalName >
< plugins >
< plugin >
< groupId > org.apache.maven.plugins</ groupId >
< artifactId > maven-war-plugin</ artifactId >
< version > 2.3</ version >
< configuration >
< archive >
< manifest >
< mainClass > org.springside.examples.quickstart.Main</ mainClass >
</ manifest >
</ archive >
< warName > ${project.artifactId}-standalone</ warName >
</ configuration >
</ plugin >
< plugin >
< groupId > org.apache.maven.plugins</ groupId >
< artifactId > maven-antrun-plugin</ artifactId >
< version > 1.7</ version >
< executions >
< execution >
< id > main-class-placement</ id >
< phase > prepare-package</ phase >
< configuration >
< target >
< move todir ="${project.build.directory}/${project.artifactId}/" >
< fileset dir ="${project.build.directory}/classes/" >
< include name ="**/*/Main.class" />
</ fileset >
</ move >
</ target >
</ configuration >
< goals >
< goal > run</ goal >
</ goals >
</ execution >
</ executions >
</ plugin >
< plugin >
< groupId > org.apache.maven.plugins</ groupId >
< artifactId > maven-dependency-plugin</ artifactId >
< version > 2.5.1</ version >
< executions >
< execution >
< id > jetty-classpath</ id >
< phase > prepare-package</ phase >
< goals >
< goal > unpack-dependencies</ goal >
</ goals >
< configuration >
< includeGroupIds > org.eclipse.jetty, org.eclipse.jetty.orbit,
javax.servlet</ includeGroupIds >
< includeScope > provided</ includeScope >
<!-- remove some files in order to decrease size -->
< excludes > *, about_files/*, META-INF/*</ excludes >
<!-- <excludeArtifactIds>jsp-api,jstl</excludeArtifactIds> -->
< outputDirectory >
${project.build.directory}/${project.artifactId}
</ outputDirectory >
</ configuration >
</ execution >
</ executions >
</ plugin >
<!-- to support compilation in linux -->
< plugin >
< groupId > org.apache.maven.plugins</ groupId >
< artifactId > maven-compiler-plugin</ artifactId >
< version > 2.5.1</ version >
< configuration >
< target > 1.6</ target >
< source > 1.6</ source >
< encoding > UTF-8</ encoding >
</ configuration >
</ plugin >
</ plugins >
</ build >
</ profile >
maven-war-plugin负责打包,并设置Main方法实现类为org.springside.examples.quickstart.Main
maven-antrun-plugin执行ant的target任务,将org.springside.examples.quickstart.Main类转移到war包的跟路径下
maven-dependency-plugin负责将jetty相关的jar包进行拆包并重新输出到war包根路径下,以便重新打包
maven-compiler-plugin负责编译web应用
注意事项、org.springside.examples.showcase.Main类实现及运行方法同方法一。
运维网声明
1、欢迎大家加入本站运维交流群:群②:261659950 群⑤:202807635 群⑦870801961 群⑧679858003
2、本站所有主题由该帖子作者发表,该帖子作者与运维网 享有帖子相关版权
3、所有作品的著作权均归原作者享有,请您和我们一样尊重他人的著作权等合法权益。如果您对作品感到满意,请购买正版
4、禁止制作、复制、发布和传播具有反动、淫秽、色情、暴力、凶杀等内容的信息,一经发现立即删除。若您因此触犯法律,一切后果自负,我们对此不承担任何责任
5、所有资源均系网友上传或者通过网络收集,我们仅提供一个展示、介绍、观摩学习的平台,我们不对其内容的准确性、可靠性、正当性、安全性、合法性等负责,亦不承担任何法律责任
6、所有作品仅供您个人学习、研究或欣赏,不得用于商业或者其他用途,否则,一切后果均由您自己承担,我们对此不承担任何法律责任
7、如涉及侵犯版权等问题,请您及时通知我们,我们将立即采取措施予以解决
8、联系人Email:admin@iyunv.com 网址:www.yunweiku.com